• 전력전자학회논문지
• /
• 제9권1호
• /
• pp.42-49
• /
• 2004

본 논문은 데드비트 외란 관측기를 사용한 외부 부하 외란 보상과 파라미터 추정기에 의한 보상 이득의 조정을 나타내고 있다. 결론적으로 PMSM의 응답은 지표 시스템을 따른다. 부하 토크 보상 방법은 데드비트 관측기로 구성된다. 노이즈 영향을 감소시키기 위해 MA 처리에 의해 구현된 후단 필터를 적용하였고, RLSM 파라미터 추정기를 가진 파라미터 보상기가 주어진 실제 시스템의 이득 계산시 사용된 파라미터로 가상 동작하여 이득이 오차가 없는 것처럼 동작하게 한다. 제안된 추정기는 문제를 풀기 위해 고성능 외란 관측기와 조합하여 사용한다. 제안된 제어 시스템은 부하토크와 파라미터 변화에 대해 강인하고 정밀한 시스템이 된다. 이상의 제안된 시스템의 안정성과 유용함이 컴퓨터 시뮬레이션과 실험을 통하여 확인되었다.

• Journal of Electrical Engineering and Technology
• /
• 제7권3호
• /
• pp.349-357
• /
• 2012

This paper presents a hybrid motor prototype convenient to modify the magnet and reluctance torques. The rotor of the prototype consists of magnet and reluctance parts, so the generated torque includes both magnet and reluctance torques. A considerable feature of the motor is that the ratio of the magnet and reluctance parts can be modified on the rotor and the rotor hybridization ratio can be varied. Another important point is the mechanical angle between the parts changed by means of the suitable construction of the parts on the rotor shaft. Finite element (FE) analysis was carried out for the proposed motor and static torque measurements were realized. The FE results were compared with the experimental results. Average torque and maximum torque values were obtained and three dimensional 3-D graphs were formed by using the experimental data. It is possible to make different combinations by changing the parts and the angle between the parts due to the proposed motor. So the magnet and reluctance torques are modified and different combinations give different torque behavior.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권1호
• /
• pp.32-39
• /
• 2012

With the aid of genetic algorithm (GA), global optimization with multiple geometry parameters is feasible in the design of switched flux permanent magnet (SFPM) machines. To investigate the advantages of global optimization over individual optimization, which has been used extensively for the design of SFPM machines, a comparison between the two approaches is carried out for the case of fixed copper loss and volume. In the case of individual parameter optimization, the sequence in which the individual parameters are optimized is very important. In the global optimization a better design can always be achieved although the corresponding torque density is found to be only slightly better than that of individually optimized with correct design sequence. By using the obtained global optimization results, the performance in machines having two types of stator and rotor pole combinations, i.e. 12/10 and 12/14, are compared, and it is shown that higher torque is exhibited in the 12/14 SFPM machine. Finally, this paper also demonstrates that global optimization, with the restriction of equal pole width, magnet thickness and slot opening, can maximize the torque density without significantly sacrificing other performance, such as cogging torque and overload capability.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.959-961
• /
• 2004

A multi pole SRM(switched reluctance motor) is applied by the regulated current in regular sequence. So, it can be started by itself. But a single phase SRM can not be started by itself because the positive torque is only generated in the limited zone which the inductance is increased. Therefore, it is required auxiliary device for self starting which place the rotor in start position. The prototype was designed and fabricated in the previous research. It has the permanent magnet, which is installed in the bottom of the rotor, for self starting. But the permanent magnet affect the prototype during operation and cause the decrease of the torque and speed. The influence of the permanent magnet on the average torque and speed was already confirmed. On this paper, the instant torque of the prototype was calculated from the experiment results which is the inductance and current according to installed permanent magnet or not.

• 한국운동역학회지
• /
• 제31권1호
• /
• pp.30-36
• /
• 2021

Objective: The objective of the present study was to analyze the relationship between strength of the lower extremity's joints and their local dynamic stability (LDS) of gait in elderly women. Method: Forty-five elderly women participated in this study. Average age, height, mass, and preference walking speed were 73.5±3.7 years, 153.8±4.8 cm, 56.7±6.4 kg, and 1.2±0.1 m/s, respectively. They were tested torque peak of the knee and ankle joints with a Human Norm and while they were walking on a treadmill at their preference speed for a long while, kinematic data were obtained using six 3-D motion capture cameras. LDS of the lower extremity's joints were calculated in maximum Lyapunov Exponent (LyE). Correlation coefficients between torque of the joints and LyE were obtained using Spearman rank. Level of significance was set at p<.05. Results: Knee flexion torque and its LDS was negatively associated with adduction-abduction and flexion-extension movement (p<.05). In addition, ratio of the knee flexion torque to extension and LDS was negatively related to internal-external rotation. Conclusion: In conclusion, knee flexion strength should preferentially be strengthened to increase LDS of the lower extremity's joints for preventing from small perturbations during walking in elderly women.

• 조명전기설비학회논문지
• /
• 제16권5호
• /
• pp.14-21
• /
• 2002

본 논문은 4상과5상 하이브리드형 스텝모터의 모델링, 특성해석 및 디텐트 토크에 대한 고조파 저감을 대상으로 연구하였다. 이를 위하여 기계적인 모델링을 도출하였으며 자계해석을 위해서 퍼미언스법을 이용하였다. 이러한 해석 결과 본 모델에 대한 디텐트 토크를 얻을 수 있었다. 또한 두 모델 구조에 대한 상차의 특성해석 비교를 통하여, 본 모델에 대한 디텐트 토크를 유도해 낼 수 있었다. 이때 5상 스텝모터는 4상 스텝모터에 비하여 디텐트 토크의 감소와 스텝응답이 개선됨을 알 수 있었다. 해석결과 퍼미언스분포의 크기는 평균토크의 발생에 영향을 미치며, 고조파성분의 크기가 토크 리플의 크기를 발생함을 알 수 있었다.

• 한국강구조학회 논문집
• /
• 제20권3호
• /
• pp.399-407
• /
• 2008

건축공사 표준시방서에서 규정하는 TS고력볼트는 KS B 2819에 따라 토크관리법에 의한 체결한다. TS고력볼트는 핀 테일이 파단되면 적정축력이 도입되는 것으로 알려져 있지만, 실제로는 온도조건에 따라 토크계수가 변하고 도입축력도 설계기준에 미치지 못하는 경우가 발생한다. 본 논문에서는 현장 온도조건이 볼트의 토크계수 및 도입축력의 영향을 평가하기 위해 ${-10^{\circ}C{\sim}50^{\circ}C}$ 범위에서 3 종류의 고력 볼트에 대해 도입축력, 토크계수, 너트회전각을 실험적으로 비교 분석하였다. 실험결과 TS고력볼트의 경우 핀 테일이 파단될 때 모든 온도조건에서 설계볼트장력과 표준볼트장력을 상회하는 도입축력을 나타냈으며 ${-10^{\circ}C}$에서 ${50^{\circ}C}$까지 온도 상승함에 따라 핀 테일 파단시점의 볼트에 도입되는 평균축력은 20kN 증가되었다. 아연피막 처리한 일반육각형 고력볼트의 경우, $0^{\circ}C$, $20^{\circ}C$, $50^{\circ}C$조건, 토크계수 0.13과 토크 ${462N{\cdot}m} $에서 표준볼트축력을 상회하였지만, 도입축력의 일정한 경향을 찾을 수 없었으며 온도변수 별 평균 도입축력 차는 최대 50kN이었다. 일반 육각고력볼트의 경우, 온도상승에 따라 평균 도입축력도 상승되는 추세였으며 토크 ${462N{\cdot}m} $ 일때 온도변수별 볼트의 도입축력은 최대 33kN 차이를 보였다. 또한, TS볼트를 제외한 육각볼트 종류 군에 대해서는 너트회전각 ${90^{\circ}}$ 경우의 도입축력은 설계볼트장력에 미치지 못했다. 따라서, 기존 너트회전각 ${120^{\circ}{\pm}30^{\circ}}$의 하한치 ${-30^{\circ}}$에 대한 재평가를 고려해 볼 필요가 있다.

• The Journal of Korean Physical Therapy
• /
• 제15권2호
• /
• pp.168-181
• /
• 2003

The purpose of this study was to investigate the effects of circuit weight training(CWT) on isokinetic muscle strength and body composition in elderly. The subjects who engaged in this experiment exercised at 40$\%$ of 1-RM, 12 repetitions, followed by 15 sec as the subject moved to the each break training program which was consist of the circuit of 10 stations performed on 3 set a day, circuits 3 days a week during 10 weeks. The assessment of isokinetic factor was in concentric flexors and extensors of right and left knee joint. Tests were performed on the Cybex 770 Isokinetic Dynamometer and body composition were estimated the three parts of chest, abdomen and anterior thigh by using skinfold caliper, calculated the average and followed by Seri and Brozek way. Statistical analysis were performed using analysis of variance paired t-test, accepting level for all significant was above $\alpha$=.05 and $\alpha$=.01. Following is as a result of 10 weeks circuit weight training. 1. At the $60_{\circ}$ /sec, the right and left knee isokinetic concentric flexors and extensors peak torque increased significantly (p < .01). 2. At the $180_{\circ}$ /sec, the right and left knee isokinetic concentric flexors and extensors peak torque increased significantly (p < .01). 3. At the $60_{\circ}$ /sec, the right and left knee isokenetic concentric flexors and extensors average power increased significantly(p < 0.5, p < .01) and at the $180_{\circ}$ /sec, the right extensors didn't show any statistical significant. 4. At the $60_{\circ}$ /sec, the right and left knee Isokinetic concentric flexors and extensors total work increased significantly(p < .05, p < .01) but at the $180_{\circ}$ /su right concentric flexors didn't show any statistical significant. 5. The body composition changed significantly(p < .01). These results suggest that 10 weeks circuit weight training increases the peak torque, average power, total work significantly and decreases the $\%$body fat significantly.

• The Journal of Korean Physical Therapy
• /
• 제15권4호
• /
• pp.398-411
• /
• 2003

The purpose of this study was to investigate the effects of circuit weight training(CWT) on isokinetic muscle strength and body composition in elderly. The subjects who engaged in this experiment exercised at $40\%$ of 1-RM, 12 repetitions, followed by 15 sec as the subject moved to the each break training program which was consist of the circuit of 10 stations performed on 3 set a day, circuits 3 days a week during 10 weeks. The assessment of isokinetic factor was in concentric flexors and extensors of right and left knee joint. Tests were performed on the Cybex 770 Isokinetic Dynamometer and body composition were estimated the three parts of chest, abdomen and anterior thigh by using skinfold caliper, calculated the average and followed by Seri and Brozek way. Statistical analysis were performed using analysis of variance paired t-test, accepting level for all significant was above ${\alpha}=.05$ and ${\alpha}=.01$. Following is as a result of 10 weeks circuit weight training. 1. At the $60_{\circ}$ /sec, the right and left knee isokinetic concentric flexors and extensors peak torque increased significantly(p<.01). 2. At the $180_{\circ}$ /sec, the right and left knee isokinetic concentric flexors and extensors peak torque increased significantly(p<.01). 3. At the $60_{\circ}$ /sec, the right and left knee isokenetic concentric flexors and extensors average power increased significantly(p<.05, p<.01) and at the $180_{\circ}$ /sec, the right extensors didn't show any statistical significant. 4. At the $60_{\circ}$ /sec, the right and left knee Isokinetic concentric flexors and extensors total work increased significantly(p<.05, p<.01) but at the $180_{\circ}$ /sec right concentric flexors didn't show any statistical significant. 5. The body composition changed significantly(p<.01). These results suggest that 10 weeks circuit weight training increases the peak torque, average power, total work significantly and decreases the $\%$body fat significantly.

• 대한치과보철학회지
• /
• 제35권3호
• /
• pp.557-565
• /
• 1997

Screw-shaped implants of commercially pure (c.p.) titanium, c.p. niobium, c.p. zirconium, and stainless steel(Sus 304) were inserted in the rabbit tibial bone over 12 weeks of follow-up. New developed torque gauge instrument was used to evaluate the implant holding power and a image analysis program coupled to a microscope was used for histomorphometry. The three best consecutive threads of each implant were measured. Quantitative analyses at 12 weeks revealed a partial bone contact to the four kinds investigated metals. There were no obvious adverse tissue reactions to any of the biomaterials. At 12 weeks the average removal torques for titanium, niobium and zirconium were better than that needed for Sus 304 screws, on the other hand high score of bony contact ratio of titanium and niobium were showed in comparison to those of zirconium and Sus 304. There was no significant differences in the amount of interfacial bone of zirconium and Sus 304 whereas there was significant difference in the torque forces of niobium and Sus 304. Three months after implant insertion, the average removal torque was 6.64 Ncm for the titanium, 6.57 Ncm for the niobium, 6.38 Ncm for the zirconium, and 4.25 Ncm for the Sus 304. On average bone contacts there were 51.24% in the titanium, 48.19% in the niobium, 31.79% in the zirconium, 23.54% in the Sus 304. Biocompatibility of the titanium, niobium and zirconium was acceptable level in comparison to the Sus 304.