• 전기학회논문지
• /
• 제56권4호
• /
• pp.645-650
• /
• 2007

This paper proposes a parameter estimation technique of a power transformer. Based on the combined equation, it estimates separately the primary and secondary leakage inductances using the least square method from the instantaneous voltages and currents in the steady state. The performance of the proposed technique was investigated by varying the cut-off frequency of the filter and the number of samples per cycle. The estimated values are obtained based on the average value for 41 cycle.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제4권1호
• /
• pp.1-9
• /
• 2000

This paper describes an analysis of various factors affecting traffic noise propagation, including the distance from the road, existence of a direct path of noise propagation, density and height of buildings, and procedure for predicting the attenuation of noise levels from roads. The analysis is based on a multiple number of regression models, utilizing the quantification theory of the first kind. This study incorporates a large amount of survey data concerning traffic noise propagation. The survey of the traffic noise propagation around main roads was carried out in several residential areas, mainly in Kwangju. The attenuation of noise levels measured provided 691 usable data samples. A multiple regression analysis demonstrated that the distance from the road makes the most significant contribution to the attenuation of the noise level. The second contributor was found to be the existence of a direct path of noise propagation. The building density and average height of the buildings also affected the attenuation of the noise level considerably. Other factors, such as the height of the building behind the receiver microphone and the number of traffic lanes on the noise-source roads, did not contribute as much to the attenuation of the noise level as the factors mentioned avove.

• Journal of Biosystems Engineering
• /
• 제40권2호
• /
• pp.115-123
• /
• 2015

Purpose: A sampling scheme may significantly affect the accuracy of a sensor. This study was conducted to investigate the effects of sampling point locations on optical reflectance measurements of Chinese cabbage and kale plant leaves. Methods: Variability and similarity of multiple measurements for different parts of the leaves were compared. Results: The results indicate that the variability between the average and individual reflectance spectra was smaller for the blade part than for the vein part. Furthermore, the reflectance for the blade part over the upper leaf area was greater and more stable than those for the other parts for both the cabbage and kale leaf samples. Conclusions: The results provide guidelines for optical reflectance measurements of Chinese cabbage and kale plants. The effects of the number of sampling points, the number of leaves, and the relationships between optical reflectance and leaf components remain to be investigated in the future.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 A
• /
• pp.104-106
• /
• 2003

This paper proposes a parameter estimation technique of a power transformer. Based on the combined equation, it estimates separately the primary and secondary leakage inductances using the least square method from the instantaneous voltages and currents in the steady state. The performance of the proposed technique was investigated by varying the cut-off frequency of the filter and the number of samples per cycle. The estimated values are obtained based on the average value for 41 cycles.

• 한국의상디자인학회지
• /
• 제15권2호
• /
• pp.77-89
• /
• 2013

This study investigated the formation of silhouette and hemline shape of knit flare skirts according to the properties of knit material through virtual clothing with a 3D virtual clothing system called i-Designer of Technoa, thus building a database of the property data of knit material to reduce the number of sample making steps repeated and implemented several times in the process of clothes making. The results would help to estimate a silhouette in advance, offer assistance to the development of original knit wear, and explore ways to provide basic data for the development of the knit industry of the nation. The investigator made 12 kinds of experimental clothes to the angles(width of skirt: $90^{\circ}$ and $180^{\circ}$), gauge(7G, 12G, and 15G), and grain directions(wale and bias direction) of experimental clothes for virtual clothing. The dynamic characteristics of knit skirt samples according to each gauge were measured with the KES-FB system. Draper shapes were analyzed with the sectional shape data of hemline based on i-Designer. As for the measurements of the sectional shape of hemline and the formation of silhouette, the number of nodes, the average height of node mountains and valleys, and the hemline width right and left and before and after increased at the angle of $180^{\circ}$ than $90^{\circ}$. As gauges multiplied, the number of nodes, and silhouette angle dropping. When considering grain directions, the number of nodes and silhouette index increased in the wale direction at the angle of $90^{\circ}$ with the number of nodes and silhouette angle increasing in the wale direction at the angle of $180^{\circ}$.

• International Journal of Advanced Culture Technology
• /
• 제9권2호
• /
• pp.47-55
• /
• 2021

The coronavirus disease 2019 (COVID-19) pandemic continuously influences on the health and well-being of people and communities worldwide. The purpose of this study was to explore the published research articles in the fields of nursing and health during the COVID-19 pandemic. The research design is an exploratory study. Samples are the abstracts of the articles from a literature database, PubMed, that were published from January 1st, 2020 to April 15th, 2021. We used a MeSH term, 'nursing' and "COVID-19" to retrieve articles that are related to COVID-19. Five hundred and fifty-five articles were retrieved. Two hundred and sixteen articles were excluded as they were not met the inclusion criteria. The total number of articles used in this study was three hundred and thirty-nine. The average number of articles published during the data collection period was 21.9. Seven topics were discovered from the abstracts of the articles: COVID-19 management and guidance; Perinatal COVID-19 and breastfeeding; Nurse; Health service and support; Patient care; Research; and Education and experience. This study revealed some interesting topics from the articles related to COVID-19 and provided some sense of research areas that may be interesting and allow us to develop important research questions about nursing science and nursing practice.

• 인지과학
• /
• 제10권3호
• /
• pp.77-83
• /
• 1999

1990년대 OCR에 대한 관심이 고조되면서, 다양한 필기 데이터베이스가 전 세계적으로 구축되었다. 그러나, 현재 연구분야에서 직면한 문제는 필기 품질을 포함하여 각기 다양한 방법으로 구축된 데이터베이스 내에서 필기 문자의 품질을 평가하는 것이다. 본 논문은 다양한 필기 데이터베이스를 비교하고, 문자 인식기의 성능을 객관적으로 평가하는데 사용할 수 있는 필기 품질을 측정하는 방법을 제안한다. 여기서 사용된 핵심 아이디어는 각각의 문자 샘플을 필기 품질에 따라 여러 개의 그룹으로 나누는 것이다. 제안된 방법의 성능을 평가하기 위하여, 대용량 필기 한글 데이터베이스인 KU-1 데이터베이스에 대한 실험을 수행한 결과, 제안된 방법이 필기 데이터베이스를 비교하고, 인식기의 성능을 객관적으로 평가하는데 유용하게 사용할 수 있는 가능성을 확인하였다.

• 한국표면공학회지
• /
• 제32권2호
• /
• pp.144-156
• /
• 1999

Thermal Barrier Coating with Functional Gradient Materials (FGM-TBC) can play an important role to protect the parts from harmful environments in high temperatures such as oxidation, corrosion, and wear and to improve the efficiency of aircraft engine by lowering the surface temperature on turbine blade. FGM-TBC can increase the life spans of product and improve the operating properties. Therfore, in this study the evaluations of mechanical and thermal properties of FGM-TBC such as fatigue, oxidation and wear-resistance at high temperatures have been conducted. The samples of both the TBC with 2, 3, 5 layers (YSZ/NiCrAlY) to be produced by Air Plasma Spray method (APS) and the bulk TBC with 6 layers to be produced by Plasma Assisted Sintering method (PAS) were used. Furthermore, residual stress, bond strength, and thermal conductivity were evaluated. The average thickness of the APS was 500$\mu\textrm{m}$ to 600$\mu\textrm{m}$ and the average thickness of the PAS was 3mm. The hardness number of the top layer of APS was 750 Hv to 810Hv and that of PAS was 950 Hv to 1440Hv. The $ZrO_2$ coating layer of APS was composed of tetragonal structure after spraying as the result of XRD analysis. As shown in the results of the high temperature wear test, the 3 layer coating of APS had the best wear resistance at $800^{\circ}C$ and the 5 layer coating of APS had the best wear resistance at $600^{\circ}C$. But, these coatings had the tendency of the low-temperature softening at $300^{\circ}C$. The main mechanism of wear was the adhesive wear and the friction coefficient of coatings was increased as increasing the test temperatures. A s results of thermal conductivity test, the ${\Delta}T$ of the APS coating was increased as number of layer and the range of thermal conductivity of the PAS was $800^{\circ}C$ to $1000^{\circ}C$.

• 생명과학회지
• /
• 제20권10호
• /
• pp.1468-1475
• /
• 2010

유기농법과 관행 농법토양, 청정 갯벌과 오염 갯벌토양 그리고 청정 담수와 오염 담수 토양을 이용하여 계절의 변화에 따라 $^{35}SO_4^{-2}$을 이용한 황산염 환원율, 가스크로마토그래피를 이용한 황화수소 생성량, 최적확수 시험법을 이용한 황산염 환원세균의 분포, 공정시험법을 이용한 수분, 암모니아, 총 질소, 총 유기탄소, 총 탄소, 총 무기인, 총 인, 황산염 농도의 토양 성분조사를 실시하였다. 그 결과 황산염 환원율은 황산염의 농도보다 황산염 환원세균의 군집크기와 질소와 인과 같은 토양 성분과 서로 밀접한 관련이 있는 것으로 확인되었다. 그리고 황화수소 생성량은 10월 토양에서 가장 높게 나타났으나, 담수 토양 보다는 높은 황산염 농도를 함유한 갯벌 토양에서 더 높게 나타났고, 청정 지역보다는 오염 지역 토양에서 높은 값을 나타냈다. 따라서 혐기환경의 황산염 환원율과 황화수소 생성량은 황산염 환원세균의 군집과 토양 내 여러 가지 성분 그리고 온도에 의해 영향 받는 것을 확인하였다.

• 한국환경과학회지
• /
• 제19권11호
• /
• pp.1445-1456
• /
• 2010

This study presented seasonal changes of the phytoplankton community in Junam reservoir by pollution and water quality of the lake. The water storage of the reservoir is 5.3 million ton, most of which are being utilized for agricultural, industrial and residential purposes. The annual precipitation during the investigation period was 1,868.9 mm, increasing by 20% from the average annual level of 1,506.7 mm in 2009. The annual average water storage was 57.3%. It decreased during agricultural season and then increased again after monsoon rainfall. The loads of BOD were $3,799kgday^{-1}$, and 81% of them came from livestock and household. The TN and TP loads were $1,164kgday^{-1}$ and $170kgday^{-1}$, respectively, and 76% of them came from livestock. We assessed water quality of the Junam reservoir using 17 variables. According to the result, the reservoir met the fourth grade, meaning slightly bad, because of high concentration of COD, SS and chlorophyll-a. Eutrophication assessment was conducted by revised Carlson's Index (TSIm, Aizaki), and it was found that the entire lake was eutrophicated with high chlorophyll-a concentration all through the year, except during February to April and in July. A total of 76 phytoplankton species were identified from the samples. Among them, the largest number of species were Chlorophyceae with 33 species(43.4%), followed by Bacilliophyceae with 27 species(35.5%), Cyanophyceae with 8 species(10.5%), and Cryptophyceae with species(10.5%). The total cell number of phytoplankton was the highest in October(7,884 cells $mL^{-1}$) among Cyanophyceae and Bacilliophyceae. The seasonal succession of Chlorophyceae (Chlamydomonas spp.), Cyanophyceae(Microcystis aeruginosa) and Cryptophyceae(Rhodomonas spp.) was observed during January to May, July to September and October to December respectively.