• Korean Journal of Community Nutrition
• /
• v.13 no.1
• /
• pp.100-110
• /
• 2008

Recently, a lot of epidemiological studies revealed that low HDL-cholesterol level was a better predictor of risk for coronary heart disease than total cholesterol. This study investigated the anthropometric parameters, clinical blood indices, and dietary factors influencing serum HDL-cholesterol level by using a cross-sectional study for Korean female college students. The subjects were 94 female college students. They were divided into three groups according to their serum HDL-cholesterol levels, low HDL-cholesterol (<50 mg/dL, n=20), medium HDL-cholesterol (50 $\leq$, < 60 mg/dL, n=39) high serum HDL-cholesterol groups (60 $\leq$ mg/dL, n = 35). This study examined their demographic data and dietary intake throughout a questionnaire. Clinical blood indices were measured using an automatic blood chemistry analyzer (Selectra E), after 12 hours of fasting. BMI, body weight, fat mass, and waist circumferences were significantly increased according to low serum HDL-cholesterol levels. Serum lipid analysis showed a significantly higher level of TG, LDL-/HDL-Ratio, atherogenic index in the low HDL-cholesterol group. Serum levels of GPT, uric acid and alkaline phosphatase in the low HDL-cholesterol group were significantly higher than in the other group. The average consumption of energy was 1627 kcal and 77.76% of estimated energy requirement (EER). The mean ratio of calories from carbohydrate: protein: fat was 57:15:28. The low HDL-cholesterol group was significantly higher than the other groups in eggs, fat and oils consumption. Interestingly, milk and diary products consumption of low HDL-cholesterol group was half (p < 0.05) of those of the other groups. In conclusion, serum HDL-cholesterol levels appeared to be decreased by increasing BMI, fat mass, waist circumference, and serum TG level. In addition, some dietary factors seemed to be related to serum HDL-cholesterol levels. However, further research is needed to elucidate the exact relationship between serum HDL-cholesterol level and dietary factors.

• Journal of Biosystems Engineering
• /
• v.27 no.5
• /
• pp.433-450
• /
• 2002

The daily food intake for dairy cows has to be effectively controlled to breed a sound group of cows as well as to enhance the productivity of the cows. But, feed stuffs are fed in the common bulk for a group of cows in most cases despite that the individual food intake has to be varied. To obtain the feed for each cow, both the nutrient requirements and the nutrient composition of fred have to be provided in advance, which are based on the status of cows such as weigh marginal weight amount of milk, fat concentration in milk, growth and milking stages, and rough feed ratio, etc. Then, the mixed ration fur diet would be computed by the nutrient requirements constraints. However, when TMR (Total Mixed Ration) is conventionally supplied for a group of cows, it is almost impossible to get an optimal feed mixed ration meeting the nutrient requirements of each individual cow since the constraints are usually conflicting and over-constrained although they are linear. Hence, addressed in this paper is a simulated annealing (SA) technique to find the food intake for dairy cows, considering the characteristics of individual or grouped cows. Appropriate parameters fur the successful working of SA are determined through preliminary experiments. The parameters include initial temperature, epoch length. cooling scheduling, and stopping criteria. In addition, a neighborhood solution generation method for the effective improvement of solutions is presented. Experimental results show that the final solution for the mixture of feed fits the rough feed ratio and some other nutrient requirements such as rough fiber, acid detergent fiber, and neutral detergent fiber, with 100 percent, while fulfilling net energy for lactating, metabolic energy, total digestible nutrients, crude protein, and undegraded intake protein within average five percent.

• Journal of the East Asian Society of Dietary Life
• /
• v.15 no.6
• /
• pp.655-662
• /
• 2005

Body content bone mined density and nutrient intake status of 129 college women in Daegu area are analyze4 The mean age was 23.1 years. Bone mineral density was measured in their right heel by SONOST-2000 ultrasound bone densitometer, and nutrient intake was assessed by a Questionnaire. Diet intake data were obtained by using a 24 hours recall method to evaluate the subject's usual diet. The average energy, Ca, Ee, Zn and folate intakes were 64.2, 47.5, 54.7, 62.9 and $57.4\%$ of RDA, respectively. Ca/P and Ca/Protein ratio were 0.46 and 6.7, respectively. The mean adequacy ratio(MAR), an index of overall dietary quality wag 0.6. The index of nutritional quality was under 1.0 for protein(0.7), vitamin A(0.9), E(0.7), $B_1(0.8)$, niacin(0.8), $B_6(0.6)$ and phosphorus(0.6). The less the protein and energy intake, the less the bone mineral density(p<0.05). The intakes of protein(p<0.05) and that of phosphorus(p<0.001) were positively correlated with bone quality index(BQI). The calcium intake was positively correlated with Z-score(p<0.05). The phosphorus intake was positively correlated with T-score(p<0.001) and Z-score(p<0.0001). In conclusion, this study indicates that nutrient intake of the college women is considerably lower than the RDA. Also the BQI is lower than standard.

• Journal of Korean Society for Atmospheric Environment
• /
• v.34 no.4
• /
• pp.616-624
• /
• 2018

In this study, a previous DNPH (2,4-dinitrophenylhydrazine) coupled with high performance liquid chromatography (HPLC) method to measure the concentration of formaldehyde in ambient and source environments has been improved. To improve the disadvantage of the previous HPLC method, an appropriate composition ratio of mobile phase (water: acetonitrile (ACN)) was determined and an isocratic analysis was conducted. Furthermore, limit of detection (LOD), limit of quantitation(LOQ), accuracy, and precision were investigated to verify the reliability of the analytical conditions determined. Finally, samples of exhaust gases from five different industrial facilities were applied to HPLC analytial method proposed to determine their formaldehyde concentrations. The appropriate composition ratio of the mobile phase under the isocratic condition was a mixture of water(40%) and ACN(60%). As the volume fraction of the organic solvent ACN increases, retention time of the formaldehyde peak was reduced. Detection time of formaldehyde peak determined using the proposed isocratic method was reduced from 7 minutes(previous HPLC method) to approximately 3 minutes. LOD, LOQ, accuracy, and precision of the formaldehyde determined using standard solutions were 0.787 ppm, 2.507 ppm, 93.1%, and 0.33%, respectively, all of which are within their recommended ranges. Average concentrations of the formaldehyde in five exhaust gases ranged from 0.054 ppm to 1.159 ppm. The lowest concentration (0.054 ppm) was found at samples from waste gas incinerator in a bisphenol-A manufacturing plant. The highest was observed at samples from the absorption process in manufacturing facilities of chemicals including formaldehyde and hexamine. The analytical time of the formaldehyde in ambient air can be shortened by using the isocratic analytical method under appropriate mobile phase conditions.

• Journal of the East Asian Society of Dietary Life
• /
• v.10 no.5
• /
• pp.387-393
• /
• 2000

Recently, it appears to have a trend of adult having weight increase in Korea. The number of obese people is increasing in Korea due to the changes of meal pattern and the lack of physical activities. Currently, obesity is the prevalent health problem in the world. The purpose of this study was to investigate the effect of mulberry leaf-Jeolpyun on the serum lipids of overweighted male university students. After 3 days of education and adaptation on this study, twenty male university students with 20.9yrs old average were fed a uniformed dormitory foodservice, and they ate constant amount of 9% mulberry leaves added-rice cake, Jeolpyun(100g) instead of boiled rice(l00g) , on each meal. Experiment was conducted during 14 days period. All meals were provided promptly. and the subejects were required to have breakfast, lunch, and dinner on weekdays. Mean height, weight, and BMI were 176.55cm, 90.OOkg, and 28.73, respectively. Although it was not very significant, body weight of the subjects appeared to be reduced after consuming the 100g substitute diet of mulberry leaf-Jeolpyun. Daily energy Intake of the subjects was 2,360.6kcal, which represents 94% of the Korean RDA. The ratio of energy obtained from carbohydrate, protein, and fat was 55: 17'27 As compared with the Korean RDA, 65 : 15 20, carbohydrate consumption was decreased but protein and fat consumption was a little bit increased. The ratio of animal-protein source was 58%, and animal-fat intake was 42%. Triglyceride concentrations decreased. but HDL-cholesterol was in the reversed manner The concentrations of HDL-cholesterol increased significantly after the 2wk-lOOg subtitute diet of mulberry leaf-Jeolpyun (p<0.05) . However, there were no significant differences in total cholesterol and LDL-cholesterol con concentrations .

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.38 no.3
• /
• pp.47-54
• /
• 2001

This study is to analyze the impedance response in human body by acoustic stimulation on acupoints and contrast parte; for objectification of the meridian substance. It is to verify meridian pathway and channel theory or bio-energy in body. This paper proposes to make an hypothesis about the underground water theory. The meridian has not tube or pipe line type channel but bio-energy flow along the channel similar to flowing pattern of underground water in body. It was analyzed the current characteristic or impedance response after acoustic stimulation by sound wave of 5 specific tones. The response characteristics of current stimulation are measured by the average current magnitude and variation ratio or meridian. The current variation ratio or Live Meridian(gung) 33.2%, Heart Meridian(sang) 30.7% Kidney Meridian (gak) 33.1%, Spleen Meridian(chi) 33.9%, Lung Meridian (wo) 30.7% are to be compared to contrast parts (non-acupoint and meridian). In experimental results, meridian is discrimination to non-meridian, and 5 vital meridians have a reciprocal relationship with sound wave of 5 specific tones.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.5
• /
• pp.39-46
• /
• 2006

The fuel cell is one of promising environment-friendly energy sources for the next generation. The bipolar plate is a major component of the PEM fuel cell stack, which takes a large portion of stack cost. In this study, as alternative materials for bipolar plate of PEM fuel cells, graphite composites were fabricated by compression molding. Graphite particles mixed with epoxy resin were used as the main substance to provide electric conductivity To achieve desired electrical properties, specimens made with different mixing ratio, processing pressure and temperature were tested. To increase mechanical strength, one or two layers of woven carbon fabric were added to the graphite and resin composite. Thus, the composite material was consisted of three phases: graphite particles, carbon fabric, and epoxy resin. By increasing mixing ratio of graphite, fabricated pressure and process temperature, the electric conductivity of the composite was improved. The results of tensile test showed that the tensile strength of the two-phase graphite composite was about 4MPa, and that of three-phase composite was increased to 57MPa. As surface properties, contact an91e and surface roughness were tested. Graphite composites showed contact angles higher than $90^{\circ}$, which mean low surface energy. The average surface roughness of the composite specimens was $0.96{\mu}m$.

• Water for future
• /
• v.29 no.1
• /
• pp.213-220
• /
• 1996

This paper presents an experimental study on the discharge head of Cherepnov water lifter that was continuously operated with the aid of the siphon. The energy used by the Cherepnov water lifter is derived from the potential energy ofthe water itself. The lifter consists of three interconnected tanks and five pipes, one of which is open and two others are hermetically sealed. The effects of varying operating parameters such as the tank and pipe size, the ratio between head of discharge and drop height were analyzed. As a result, factors that can maximize the efficiency and increase the average delivery rate were indentified. When the ratio between head of discharge and drop height is about 0.5, the efficiency of Cherepnov water lifter is maximized. In order to design the efficient Cherepnov water lifter, the discharge head of the Cherepnov water lifter should be assigned to be twice as much as the drop height. The effect of tank size on the efficiency is less than 5%, while the effect of the pipe size is not negligible. The larger the pipe size is, the more the efficiency increases.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.9
• /
• pp.4001-4007
• /
• 2011

In this study, we selected ten normal women in their 20's and 4 weeks measured Exercise Intensity, Voluntary Ventilation, Respiratory Exchange Ratio, Oxygen and Calorie Consumption and Ventilation Equivalent of them during Normal Gait, Splint-equipped Gait and Crutch Gait With Splint in order to find out whether the movement limitation and the weight of orthosis could have an effect on energy consumption. Each gait was conducted at a comfortable speed, 2.74 km/h for 30 minutes equipped with splint whose average weight is 1.2 kg. In the result of the study, The Crutch Gait With Splint showed high Exercise Intensity compaired to Normal Gait and Splint-equipped Gait. In addtion, in The Voluntary Ventilation and Oxygen Consumption, The Crutch Gait showed higher figures than two the others and the difference was significant as well(p<0.05). As for The Calorie Consumption, it also showed higher figures than two the others but the difference was not statistically significant. Finally, in The Respiratory Exchange Ratio and The Ventilation Equivalent, there was no significant difference among three conditional variables.

• Advances in concrete construction
• /
• v.8 no.3
• /
• pp.173-185
• /
• 2019

This article presents a comparative study of the effect of steel layouts on the seismic behavior of transition steel-concrete composite connections, both experimental and analytical investigations of concrete filled steel tube-reinforced concrete (CFST-RC) and steel reinforecd concrete-reinforced concrete (SRC-RC) structures were conducted. The steel-concrete composite connections were subjected to combined constant axial load and lateral cyclic displacements. Tests were carried out on four full-scale connections extracted from a real project engineering with different levels of axial force. The effect of steel layouts on the mechanical behavior of the transition connections was evaluated by failure modes, hysteretic behavior, backbone curves, displacement ductility, energy dissipation capacity and stiffness degradation. Test results showed that different steel layouts led to significantly different failure modes. For CFST-RC transition specimens, the circular cracks of the concrete at the RC column base was followed by steel yielding at the bottom of the CFST column. While uncoordinated deformation could be observed between SRC and RC columns in SRC-RC transition specimens, the crushing and peeling damage of unconfined concrete at the SRC column base was more serious. The existences of I-shape steel and steel tube avoided the pinching phenomenon on the hysteresis curve, which was different from the hysteresis curve of the general reinforced concrete column. The hysteresis loops were spindle-shaped, indicating excellent seismic performance for these transition composite connections. The average values of equivalent viscous damping coefficients of the four specimens are 0.123, 0.186 and 0.304 corresponding to the yielding point, peak point and ultimate point, respectively. Those values demonstrate that the transition steel-concrete composite connections have great energy dissipating capacity. Based on the experimental research, a high-fidelity ABAQUS model was established to further study the influence of concrete strength, steel grade and longitudinal reinforcement ratio on the mechanical behavior of transition composite connections.