• Journal of Nutrition and Health
• /
• v.30 no.3
• /
• pp.349-359
• /
• 1997

This study was designed to study sources of variability(subjects, day by day, season, day of week, sequence, number of repeated days, compliance etc.) in multiple 24-hour dietary recall method. Dietary intakes of college women in Seoul were obtained using 24-hour dietary recalls, consecutive 7 days, 4 times for 1 year. The result of this study shows that 1) the reproducibility of multiple 24-hour recalls is low(intraclass correlation coefficient<0.3), 2) the intraindividual variations of all nutrients are more than 80%, 3) the major components of variation are interindividual vriability and intraindividual variability(within person variability and methodologic error). There were small but statistically significant season and compliance effects. 4) the ratio within-person varation to between-person variation for absolute and transformed nutrient intakes except some nutrients such as vitamin A, vitamin C, energy from protein and fat etc, was less than 1.7 the minimum numbers of days needed in 24-hour dietary recalls to estimate usual intake for this group were 1 to 21 days. And the numbers of days needed to get the usual intake of an individual varied among individuals and within individuals for different nutrients, ranged from 1 days for log carbohydrate(% energy) to 470 days for Na. 6) There were greater than 0.7 correlation coefficients between the average nutrient intakes of 12 days and intakes of 28 days. Therefore, it was desirable to take the 24-hour recall more than 12 times, repeating 3 days every season.

• Journal of Power Electronics
• /
• v.15 no.6
• /
• pp.1640-1653
• /
• 2015

This study presents a model of a drivetrain for an integrated design of a light electric vehicle (EV). For the drivetrain of each front wheel of the single-person, battery-powered EV tricycle consists of a battery, an inverter, and an outer rotor permanent magnet synchronous motor (PMSM), which is connected to an in-wheel gearbox. The efficiency of the inverter, motor, and gearbox is analyzed over the New European Driving Cycle. To calculate the losses and efficiency of the PMSM, the power electronics in the inverter and gearbox are used. The analytical models provide a fast, but less accurate result, useful for optimization purposes. To accurately predict the efficiency of the PMSM, a finite element model is used. The models are validated by test setups. Correspondingly, a good agreement between the measurements and the calculated results is achieved. A parameter study is performed to investigate the influence of the detailed component parameters (i.e., outer rotor radius, gear ratio, and number of pole pairs and stator slots) on the average efficiency of the drivetrain.

• The Korean Journal of Food And Nutrition
• /
• v.31 no.1
• /
• pp.33-42
• /
• 2018

The aim of this study was to examine the association between egg consumption and the risk of chronic disease in Korean adult females using the 2013 Korea National Health and Nutrition Examination Survey. A total of 1,230 subjects aged 40~64 were classified into the 4 groups according to the number of egg consumed per week: <1, 1~2.9, 3~5, ${\geq}5.1$ As egg consumption increased, the intake of energy, protein, fiber, cholesterol, calcium, potassium, riboflavin, and vitamin C increased. The percentage of the subjects with lower intake of energy, protein, calcium, iron, vitamin A, riboflavin, niacin, and vitamin C than the estimated average requirement in the <1 group were the highest among the groups. The blood lipid profile including total cholesterol and LDL-cholesterol was not significantly different among the 4 egg groups. The higher egg consumption was inversely related to a lower odds ratio of metabolic syndrome, hypertriglycemia, hyperglycemia, hypoHDL-cholesterolemia, and hypertension. This result indicates that egg consumption does not elevate the plasma cholesterol level and has a beneficial effect of decreasing the risk of chronic disease. (175)

• Bulletin of the Korean Chemical Society
• /
• v.35 no.1
• /
• pp.189-196
• /
• 2014

Water dispersible ZnS based nanocrystals: ZnS (blue), ZnS:Cu (green) and ZnS:Mn (yellow-orange) were synthesized by capping the surface of the nanocrystals with a mercaptopropionic acid (MPA) molecule. The MPA capped ZnS based nanocrystal powders were characterized by using XRD, HR-TEM, EDXS, FT-IR, and FT-Raman spectroscopy. The optical properties of the colloidal nanocrystals were also measured by UV/Vis and photoluminescence (PL) spectroscopies in aqueous solvents. The PL spectra showed broad emission peaks at 440 nm (ZnS), 510 nm (ZnS:Cu) and 600 nm (ZnS:Mn), with relative PL efficiencies in the range of 4.38% to 7.20% compared to a reference organic dye. The measured average particle sizes from the HR-TEM images were in the range of 4.5 to 5.0 nm. White light emission was obtained by mixing these three nanocrystals at a molar ratio of 20 (ZnS):1 (ZnS:Cu):2 (ZnS:Mn) in water. The measured color coordinate of the white light was (0.31, 0.34) in the CIE chromaticity diagram, and the color temperature was 5527 K.

• Journal of the Korean Dietetic Association
• /
• v.15 no.1
• /
• pp.1-9
• /
• 2009

The objective of this study was to assess the metabolic profiles and diet quality in college women by their mother's diabetes mellitus status. The study subjects, all college women, were classified into two groups based on the their mother's diabetes mellitus status: the offspring group (OG) and the control group (CG). The OG exhibited significantly higher body mass indices (p < 0.01), percentages of ideal body weight (p < 0.05) and high density lipoprotein cholesterol (p < 0.05) values than the CG. Additionally, the OG showed significantly higher daily average intakes of total energy (p < 0.05). fat (p < 0.001), riboflavin (p < 0.01) and calcium (0.01) than the CG. The indices of nutritional quality of protein (p < 0.05) and Na (p < 0.05) in the CG were significantly higher than those of the OG. However. we noted no significant differences in the mean adequacy ratio between the CG and OG. Overall, our results demonstrated that this factor appears to potentially be related to the subjects' mother's diabetes status. However, CG and OG were significantly different within normal range. Furthermore, nutrient adequacy indices in the CG were not assessed well in regard to energy, riboflavin, vitamin C, and calcium. Therefore, it appears that ideal body weight and diet quality should be controlled in order to prevent diabetes and diet-related problems, both in the CG and the OG.

• Journal of the Korean Society of Safety
• /
• v.16 no.3
• /
• pp.68-75
• /
• 2001

Photopolymerization, the utilization of electromagnetic radiation(or light) as the energy source for polymerization of functional monomers, oligomers is the basis of important commercial processes with broad applicability, including photoimaging and RV curing of coatings and inks. The objective of this study is to investigate the characteristics of environmental fraternitive photopolymerization of methyl methacrylate(MMA). This work is the first step to continue further research about alkyl methacrylate. The experiment was done in aqueous solution under the influence of photo-initiator concentration(0.05-0.25mol/l), light intensity (5000-9000 ${\mu}J/cm^2$) and monomer concentration(2-6mol/l). Methyl methacrylate was polymerized to high conversion ratio using hydrogen peroxide($H_2O_2$) and the kinetics model we have obtained is as follows. $R_p=k_p[S]^{0.41}[M]^{0.62}[L]^{2.45} exp(53.64/RT$). The differential method of thermogravimetric analysis(Friedman method) was used to obtain value of activation energy on decomposition reaction. The average value of it res 45.4Kca1/mol.

• Steel and Composite Structures
• /
• v.34 no.1
• /
• pp.53-73
• /
• 2020

A novel all-steel miniature bar-type structural fuse (MBSF) with cold formed bolted connections is developed in this study, which consists of a central energy dissipation core cut from a smooth round bar, an external confining tube and nuts. Three types of cross sections for the central energy dissipation core, i.e., triple-cut, double-cut and single-cut cross sections, were studied. Totally 18 specimens were axially tested under either symmetric or asymmetric cyclic loading histories, where the parameters such as cut cross sectional area ratio, length of the yielding portion and cross sectional type were investigated. Numerical simulation of 2 representative specimens were also conducted. An analytical model to evaluate the bending failure at the elastic portion was proposed, and a design method to avoid this failure mode was also presented. The experimental results show that the proposed MBSFs exhibit satisfactory hysteretic performance under both the two cyclic loading histories. Average strain values of 8% and 4% are found to be respectively suitable for designing the new MBSFs as the ultimate strain under the symmetric and asymmetric cyclic loadings.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.3
• /
• pp.231-234
• /
• 2008

For the applications which need a micro-power supply such as thin and flat displays, micro-robot, and micro-system, it is especially necessary to integrate the passive components because they typically need more than 2/3 of the space of the conventional circuit. Therefore, we have designed and fabricated a novel piezoelectric micro transformer using the PZT thin film and MEMS technologies for application to the energy supply device of the micro-systems. The dimensions of the micro-transformer is $1000{\mu}m\;{\times}\;400{\mu}m\;{\times}\;4.8{\mu}m$ $(length{\times}width{\times}thickness)$. The dynamic displacement of around $9.2{\pm}0.064{\mu}m$ was observed at 10 V. The dynamic displacement varied almost linearly with applied voltage. The average voltage gain (step-up ratio) was approximately 2.13 at the resonant frequency $(F_r=8.006KHz)$ and load resistance $(R_L)$ of 1 $M{\Omega}$.

• Transactions of the Korean hydrogen and new energy society
• /
• v.23 no.5
• /
• pp.545-550
• /
• 2012

This work is for the design study of natural gas reformer (40 $m^3/hr$ over). We used experimental kinetic data from literature. After that, we set up theoretical model based on experimental reaction kinetic data. The shape of reactor is 1.7 m long and 200 mm dia. with cylinder geometry. Volume of reactor is 53.4 liter. Average flow velocity of gases in the reactor has been determined 0.272 m/sec and residence time is 9.26 sec. Reaction temperature is $850^{\circ}C$, with pressure 9.3 Bar. Used natural gas volume is about 9.21 $m^3/hr$. Produced hydrogen is 43.7 $m^3/hr$ with no change of pressure. Unreacted natural gas is 0.09 $m^3/hr$ and the amount of steam is 26.9 $m^3/hr$. Steam to $CH_4$ (s/c ratio) is 2.91. Reforming reaction take place from the reactor entrance to 120 cm region of cylinder type reactor. After the entrance of reacting gases to 120 cm region, the reaction reaches equilibrium which is close to products. This study can be applicable to design various reactors. Output data is in good agreements with the data in literatures1).

• Journal of Communications and Networks
• /
• v.18 no.2
• /
• pp.173-181
• /
• 2016

In this paper, we address a new robust optimization problem in a multiuser multiple-input single-output broadcasting system with simultaneous wireless information and power transmission, where a multi-antenna base station (BS) sends energy and information simultaneously to multiple users equipped with a single antenna. Assuming that perfect channel-state information (CSI) for all channels is not available at the BS, the uncertainty of the CSI is modeled by an Euclidean ball-shaped uncertainty set. To optimally design transmit beamforming weights and receive power splitting, an average total transmit power minimization problem is investigated subject to the individual harvested power constraint and the received signal-to-interference-plus-noise ratio constraint at each user. Due to the channel uncertainty, the original problem becomes a homogeneous quadratically constrained quadratic problem, which is NP-hard. The original design problem is reformulated to a relaxed semidefinite program, and then two different approaches based on convex programming are proposed, which can be solved efficiently by the interior point algorithm. Numerical results are provided to validate the robustness of the proposed algorithms.