• Korean Journal of Applied Biomechanics
• /
• v.22 no.1
• /
• pp.17-24
• /
• 2012

This study is for providing fundamental data of sport biomechanics in GRF & plantar pressure of stepping foot of skilled & unskilled players' at the soccer instep shooting moments. Wearing Pedar-x of Novel, the study has drawn the following conclusion after measuring and analyzing the impact on the GRF and plantar pressure of stepping foot at the instep shooting moments. First, maximum vertical GRF showed higher in the skilled group than in the unskilled group. The results showed significantly different. This study reached the conclusion that the players in the skilled group performed faster and stronger stepping foot motions that the ones in the unskilled(p<.01). Second, since the plantar pressure of the skilled group appeared significantly higher than that of the unskilled, it has brought us to the conclusion that the skilled group performed faster and stronger stepping foot motions than the unskilled group (p<.05). Third, at the moment of instep kicking, the skilled group's average maximum plantar foot pressure of stepping foot was higher than the unskilled. Though the difference was not statistically significant, it can be concluded that the skilled group performed faster and stronger stepping foot motions than the unskilled group(p>.05). Fourth, for the COP moving route of stepping foot while instep kicking, the skilled people performed accurate and strong shooting motions directly toward the target direction with stable postures, no matter how it's left, right, front or back.

• Journal of the Korean Data and Information Science Society
• /
• v.27 no.4
• /
• pp.1001-1012
• /
• 2016

It is well known that air pollutants exert a bad influence on human health. According to the United Nations Environment Program, 4.3 million people die from carbon monoxide and particulate matter annually from all over the world. Carbon monoxide is a toxic gas that is the most dangerous of the gas consisting of carbon and oxygen. In this paper, we used 1 hour, 6 hours, 12 hours, and 24 hours average carbon monoxide concentration data collected between 2004 and 2013 in Daegu Gyeongbuk area. Parameters of the generalized extreme value distribution were estimated by maximum likelihood estimation and L-moments estimation. An evalution of goodness of fitness also was performed. Since the number of samples were small, L-moment estimation turned out to be suitable for parameter estimation. We also calculated 5 year, 10 year, 20 year, and 40 year return level.

• Research in Community and Public Health Nursing
• /
• v.30 no.1
• /
• pp.99-107
• /
• 2019

Purpose: This study aimed to assess hand hygiene (HH) compliance among visitors at a long-term care hospital in South Korea. Methods: The study was conducted at a 502-bed long-term care hospital located in Gyeonggi-do Province. From July 1 to August 15, 2017, including more than 6 weekends and one holiday, a trained observer covertly assessed visitors' HH at all five units (360 beds in total) of the study hospital building until the completion of 1,000 HH opportunities (i.e., 200 opportunities per unit). The modified World Health Organization (WHO) HH observation form was used. Instead of professional categories and the "before clean/aseptic procedure" moment, the estimated age range for each visitor were recorded in four categories: children (<14 years old), adolescents (14~18), adults (19~64), and the elderly (${\geq}65$). The collected data were analyzed using SPSS 22.0. Results: A total of 1,000 HH opportunities were observed from 766 visitors (an average of 1.31 per visitor) and the overall HH compliance rate was 20.3%. Overall, 53.7% of the HH cases were performed with soap and water. Among the 4 HH moments, the "after body fluid exposure risk" moment showed the highest compliance rate (83.5%); 93.9% used soap and water. The most commonly exposed potential body fluid among visitors was saliva (48.1%). Conclusion: For hospital visitors in long-term care hospitals, HH education programs including HH moments need to be developed and implemented. Further studies are necessary to evaluate visitors' HH compliance in various hospital settings and find the related variables influencing visitors' HH.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.669-672
• /
• 2001

We propose an efficient algorithm for an interactive content-based image retrieval using relevance feedback. In the proposed algorithm, a new query feature vector first is yielded from the average feature vector of the relevant images that is fed back from the result images of the previous retrieval. Each component weight of a feature vector is computed from an inverse of standard deviation for each component of the relevant images. The updated feature vector of the query and the component weights are used in the iterative retrieval process. In addition, the irrelevant images are excluded from object images in the next iteration to obtain additional performance improvement. In order to evaluate the retrieval performance of the proposed method, we experiment for three image databases, that is, Corel, Vistex, and Ultra databases. We have chosen wavelet moments, BDIP and BVLC, and MFS as features representing the visual content of an image. The experimental results show that the proposed method yields large precision improvement.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.8
• /
• pp.1406-1415
• /
• 2010

As process technology for semiconductor goes beyond the ultra-deep submicrometer regime, interconnect reliability on a chip has become a serious design concern. As process parameters scale, interconnect widths are reduced rapidly while the current flowing through the interconnect does not decrease in a proportional manner. This trend increases current densities in metal interconnects which may lead to poor reliability for electromigration. Hence, it is critical to estimate the current amount passing through the interconnects earlier in semiconductor design stages. The purpose of this paper is to propose a fast yet accurate current estimation technique that can offer not only analysis time equivalent to those offered by the previous approximation methods but also a relatively precise estimation by using closed-form equations. The accuracy of the proposed technique was confirmed to be about 8 times better on average when compared to the previous work.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.32 no.3
• /
• pp.99-109
• /
• 2009

Negative binomial yield model for semiconductor manufacturing consists of two parameters which are the average number of defects per die and the clustering parameter. Estimating the clustering parameter is quite complex because the parameter has not clear closed form. In this paper, a Bayesian approach using Markov Chain Monte Carlo is proposed to estimate the clustering parameter. To find an appropriate estimation method for the clustering parameter, two typical estimators, the method of moments estimator and the maximum likelihood estimator, and the proposed Bayesian estimator are compared with respect to the mean absolute deviation between the real yield and the estimated yield. Experimental results show that both the proposed Bayesian estimator and the maximum likelihood estimator have excellent performance and the choice of method depends on the purpose of use.

• International Journal of Reliability and Applications
• /
• v.4 no.3
• /
• pp.141-156
• /
• 2003

Nonparametric families of aging distributions have been the subject of investigation from long period of time and still. Both probabilistic and statistical properties of these distributions were studied for such families as new better than used renewal failure rate (NBURFR) and new better average renewal failure rate (NBARFR) classes. They have been studied by Abouammoh and Ahmed (1992). In the present work, moment inequalities are derived for the above mentioned families that demonstrate that if the mean life is finite for any of them then all higher order moments exist. Next, based on these inequalities, new test procedures for exponentiality against these families are studied showing that it is simple and hold high relative efficiency for some commonly used alternatives. Dealing with censored data case also studied.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.17 no.2
• /
• pp.91-106
• /
• 1992

It an inventory control system, the demand over time are often assumed to be independently identically distributed (i. i. d.). However, the demands may well be correlated over time in many situations. The estimation of reorder points is not simple for correlated demands with variable lead time. In this paper, a general class of autoregressive and moving average processes is considered for modeling the demands of an inventory item. The first four moments of the lead-time demand (L) are derived and used to approximate the distribution of L. The reorder points at given service level are then estimated by the three approximation methods : normal approximation, Charlier series and Pearson system. Numerical investigation shows that the Pearson system and the Charlier series performs extremely well for various situations whereas the normal approximation show consistent underestimation and sensitive to the distribution of lead time. The same conclusion can be reached when the parameters are estimated from the sample based on the simulation study.

• Journal of environmental and Sanitary engineering
• /
• v.13 no.1
• /
• pp.147-156
• /
• 1998

A synthesis process for PZT powder using $NH_{3}$ gas as a precipitator in a bubble column reactor was experimentally successful in develope a production process of piezoelectric ceramic PZT powder. Also as a reaction by coprecipitation, the crystalized PZT ceramic powder at the condition of over pH 9 could be attained. The time needed for reaction on the condition of $NH_{3}$ gas flow rate = 0.5 1/min, Ar gas flow rate = 2.0 1/min. Feed flow rate = 2.33 ml/sec was less than five minutes, so it could synthesize PZT powder for such a few moments. And the synthesized PZT powder was $0.17{\mu}m$ in diameter on an average.

• ETRI Journal
• /
• v.21 no.1
• /
• pp.40-54
• /
• 1999

In this paper, we describe a new trademark retrieval system based upon the content or the shape of trademark. The system has an on-line graphical user interface for the World Wide Web (WWW) that allows user to provide a query in forms of a sketch or a visual image to search for similar trademarks from database. User interfaces for the WWW were implemented by utilizing HTML and Java applets. The query can occur in arbitrary size and orientation. A shape representation scheme invariant to scale and rotation was developed to measure the similarity between two trademarks using the magnitude of Zernike moments as a feature set. Performance evaluation has been carried out with a database of 3,000 trademarks. It takes only about 0.6 second for the retrieval on a 200 MHz Pentium PC. The average recall of the original one among top 30 candidates queried by noisy or deformed images was 100%.