• Asian-Australasian Journal of Animal Sciences
• /
• v.4 no.4
• /
• pp.341-351
• /
• 1991

Sixteen Holstein heifer calves were used in an 112-day trial to study the effects of probiotic supplementation on growth performance and rumen metabolism. Calves were divided into four groups of four calves each, with two groups receiving the probiotic supplement and two groups serving as controls. Calves were limited to 1.6 kg dry matter of a corn-barley based grain mix per day. Long-stem bromegrass hay was fed as forage the first 56 days and bromegrass silage the last 56 days of the trial. Probiotic (28 g/d/calf) was fed along with the grain mix twice daily. Data were analyzed for the entire trial and also for the separate hay and silage feeding periods. Total weight gain and average daily gain were not affected (p>.05) by probiotic supplementation. Dry matter intake was lower (p<.05) and feed efficiency (kg feed/kg weight gain) was improved slightly during the hay feeding period for the probiotic-supplemented calves. Wither height gain was greater (p<.05) during the hay period and lower (p<.05) during the silage period for probiotic-supplemented calves. Heart girth gain was improved (p<.07) by probiotic supplementation, particularly during the hay feeding period (p<.05). Total rumen volatile fatty acid (VFA) concentration was higher (p<.05) with the probiotic-supplemented calves. Molar proportions of individual VFA were not affected (p>.05). Rumen ammonia-N and plasma urea-N concentration were lower (p<.05) for probiotic-supplemented calves during the hay feeding period. Total tract nutrient digestibility was not affected (p>.05). Some improvements in animal performance and changes in rumen and blood metabolites were observed when calves were supplemented with probiotic. Effects due to probiotic supplementation were most pronounced during the hay feeding period.

• Journal of Korea Water Resources Association
• /
• v.35 no.5
• /
• pp.475-484
• /
• 2002

A series of settling tests and physico-chemical property tests on Saemankeum fine-cohesive sediments has been conducted in order to investigate the correlation between settling properties and their physico-chemical properties which are represented as grain size distribution, mineralogical composition, and percentage of organic contents. Experimental results of physico-chemical property tests show that Saemankeum sediments are relatively large in average grain size(52${\mu}{\textrm}{m}$), and contain very small organic materials(2%), and are dominantly composed of Quarts in mineralogical aspect which has relatively low cohesion. Thus, Saemankeum sediments might be specified as the sediments whose settling properties are more influenced by the gravity than the cohesion. This characteristics of Saemankeum sediments are found to lead to relatively small settling velocity in flocculated settling region in which increasing cohesion results in increasing settling velocity, while relatively large settling velocity in hindered settling region in which settling velocity decreases with increasing cohesion.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.471.2-471.2
• /
• 2014

We demonstrate here that an improvement in precursor film density (green density) leads to a great enhancement in the photovoltaic performance of CuInSe2 (CISe) thin film solar cells fabricated with Cu-In nanoparticle precursor films via chemical solution deposition. A cold-isostatic pressing (CIP) technique was applied to uniformly compress the precursor film over the entire surface (measuring 3~4 cm2) and was found to increase its relative density (particle packing density) by ca. 20%, which resulted in an appreciable improvement in the microstructural features of the sintered CISe film in terms of lower porosity, reduced grain boundaries, and a more uniform surface morphology. The low-bandgap (Eg=1.0 eV) CISe PV devices with the CIP-treated film exhibited greatly enhanced open-circuit voltage (VOC, from 0.265 V to 0.413 V) and fill factor (FF, from 0.34 to 0.55), as compared to the control devices. As a consequence, an almost 3-fold increase in the average power conversion efficiency, 3.0 to 8.2% (with the highest value of 9.02%), was realized without an anti-reflection coating. A diode analysis revealed that the enhanced VOC and FF were essentially attributed to the reduced reverse saturation current density (j0) and diode ideality factor (n). This is associated with the suppressed recombination, likely due to the reduction in recombination sites such as grain/air surfaces (pores), inter-granular interfaces, and defective CISe/CdS junctions in the CIP-treated device. From the temperature dependences of VOC, it was confirmed that the CIP-treated devices suffer less from interface recombination.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.8
• /
• pp.1186-1190
• /
• 2002

One hundred and twenty nine primiparous sows were used to determine the effects of alternative processing procedures and feeding systems on the nutritional value of sorghum grain-based diets for lactating sows. Treatments were a ground sorghum control, steam-flaked sorghum and extruded sorghum fed in meal form and the ground sorghum control given as pellets or gruel (1:1 ratio of water and feed on a volume:volume basis). Average daily feed intake was greater for sows fed pelleted and gruel diet forms than sow fed the diets with steam-flaked and extruded sorghum (p<0.04). However, no differences occurred in sow weight or backfat losses among the treatments (p>0.14). Number of pigs weaned and livability rates were similar among treatments except that steam-flaked sorghum supported greater litter weight gains than extruded sorghum (p<0.02). Apparent digestibilities of DM, N and GE in sows fed steam-flaked and extruded sorghum were greater (p<0.001) than in sows fed pelleted or gruel diets. Of the various treatments, sows fed extruded sorghum tended to have the highest digestibilities of DM, N and GE, and lowest excretions of DM and N in the faeces. Severity of ulceration was not significantly affected by treatments (p>0.35), but keratinization was greatest for sows fed extruded sorghum (p<0.01). In conclusion, the alternative processing methods (steam-flaking and extrusion) and feeding system (pellets and gruel) had little effect on sow and litter performance. However, nutrient digestibilities were improved for all treatments that involved heating (steam flaking, extrusion and pelleting) and, thus, these treatments resulted in less fecal excretion of DM and N.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.7
• /
• pp.637-646
• /
• 2016

This study is to investigate the influence of hydrogen attack and UNSM on fatigue behaviors of the Inconel 718 alloy. The decrease of the fatigue life between the untreated and the hydrogen attacked material is 10-20%. The fatigue lives of hydrogen attacked specimen decreased without a fatigue limit, similar to those of nonferrous materials. Due to hydrogen embrittlement, about 80% of the surface cracks were smaller than the average grain size of $13{\mu}m$. Many small surface cracks caused by the embrittling effect of hydrogen attack were initiated at the grain boundaries and surface scratches. Cracks were irregularly distributed, grew, and then coalesced through tearing, leading to a reduction of fatigue life. Results revealed that the fatigue lives of UNSM-treated specimens were longer than those of the untreated specimens.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.212-212
• /
• 2014

0.04% Gd-duplex stainless steels (Gd-DSTSs) for neutron absorbing materials were inert arc-melted and poured into a Y-shape block with the size of $100{\times}100{\times}20[mm]$. The Gd-DSTS was hot rolled at $1200^{\circ}C$ followed by cold rolling to have 33% reduction. The average grain sizes of the rolling (RD), transverse (TD) and short transverse (ST) directions were 6, 7, $11{\mu}m$, respectively. The micro-hardnesses of the RD, TD and ST directions were 258.5, 292.3, 314.7 $H_V$, respectively. Corrosion potential and corrosion rate of the cold rolled Gd-duplex stainless steel in aerated artificial sea water and 0.1M $H_2SO_4$ solution were $0.2216V_{SHE}$, $0.0106A/cm^2$, $-0.0825V_{SHE}$, $0.0168A/cm^2$ for RD, $0.2210V_{SHE}$, $0.0077A/cm^2$, $0.0817V_{SHE}$, $0.0092A/cm^2$ for TD, $0.1056V_{SHE}$, $0.0059A/cm^2$, $0.0475V_{SHE}$, $0.0069A/cm^2$ for ST, respectively. The corrosion behavior depended on the texture, which were due to mainly grain boundary and minorly crystallographic texture. Friction coefficient and wear resistance were 2.07 and 0.48 mm, respectively.

• Geotechnical Engineering
• /
• v.9 no.2
• /
• pp.5-14
• /
• 1993

Weathered granite soil is the most representative as a surface soil in Korea. In this paper, the dynamic properties and settlement characteristics of Korea granite soil are studied through the dynamic triaxial compression tests. The dynamic characteristics are very important on the analysis of the foundations under dynamic loading such as machine vibration and earthquake. Soil samples having different grain sixtes were prepared at the relative densities between 80oA and 90oA and tested to measure shear moduli and damping ratios at each level of shear strain. The measured shear moduli of weathered granite soils showed large variations according to the grain sizes, confining pressures, relative densities and shear strains. Sandy weathered granite had a little larger dynamic properties than the average values of the sand studied by Seed and Idriss. Pot the well compacted granite soils, little residual settlements occured due to dynamic loading.

• Korean Journal of Materials Research
• /
• v.23 no.7
• /
• pp.392-398
• /
• 2013

A two-pass differential speed rolling(DSR) was applied to a deoxidized low-phosphorous copper alloy sheet in order to form a homogeneous microstructure. Copper alloy with a thickness of 3 mm was rolled to 75 % reduction by two-pass rolling at $150^{\circ}C$ without lubrication at a differential speed ratio of 2.0:1. In order to introduce uniform shear strain into the copper alloy sheet, the second rolling was performed after turning the sample by $180^{\circ}$ on the transverse direction axis. Conventional rolling(CR), in which the rotating speeds of the upper roll and lower roll are identical to each other, was also performed by two-pass rolling under a total rolling reduction of 75 %, for comparison. The shear strain introduced by the conventional rolling showed positive values at positions of the upper roll side and negative values at positions of the lower roll side. However, samples processed by the DSR showed zero or positive values at all positions. {100}//ND texture was primarily developed near the surface and center of thickness for the CR, while {110}//ND texture was primarily developed for the DSR. The difference in misorientation distribution of grain boundary between the upper roll side surface and center regions was very small in the CR, while it was large in the DSR. The grain size was smallest in the upper roll side region for both the CR and the DSR. The hardness showed homogeneous distribution in the thickness direction in both CR and DSR. The average hardness was larger in CR than in DSR.

• Nuclear Engineering and Technology
• /
• v.42 no.5
• /
• pp.576-581
• /
• 2010

KAERI (Korea Atomic Energy Research Institute) fabricated MOX (Mixed Oxide) fuel pellets as a cooperation project with PSI (Paul Scherrer Institut) for an irradiation test in the Halden reactor. The MOX pellets were fitted into fuel rods that included instrumentation for measurement in IFE (Institutt for Energiteknikk). The fuel rods were assembled into the test rig and irradiated in the Halden reactor up to 50 MWd/kgHM. The irradiated fuel rods were transported to the IFE, where ceramography was carried out. The fuel rods were cut transversely at the relatively higher burn-up locations and then the radial cross sections were observed. Micrographs were analyzed using an image analysis program and grain sizes along the radial direction were measured by the linear intercept method. Radial cracks in the irradiated MOX were observed that were generally circumferentially closed at the pellet periphery and open in the hot central region. A circumferential crack was formed along the boundary between the dark central and the outer regions. The inner surface of the cladding was covered with an oxide layer. Pu-rich spots were observed in the outer region of the fuel pellets. The spots were surrounded by many small pores and contained some big pores inside. Metallic fission product precipitates were observed mainly in the central region and in the inside of the Pu spots. The average areal fractions of the metallic precipitates at the radial cross section were 0.41% for rod 6 and 0.32% for rod 3. In the periphery, pore density smaller than 2 ${\mu}m$ was higher than that of the other regions. The grain growth occurred from 10 ${\mu}m$ to 12 ${\mu}m$ in the central region of rod 6 during irradiation.

• Journal of Welding and Joining
• /
• v.31 no.2
• /
• pp.16-20
• /
• 2013

Titanium and its alloys have been widely using in the various field of industry application due to high corrosion resistant properties and mechanical properties. Titanium is highly reactive in the high temperature state and the formation of titanium oxide and porosities in the nuggets of fusion welding will results in the degradation of the mechanical properties. For this reason the studies of friction stir welding for titanium have been investigated recently. The FSW zones of titanium were classified by the weld nugget (WN), the linear transition boundary (TB) and the heat affected zone (HAZ). The WN along with titanium parent was characterized by the presence of twins and dislocations. The average grain size and hardness of WN has been changed according to heat input. The grain refinement resulted from the FSW increased the hardness in the stir zone. Sound dissimilar joints between SUS 304 and CP-Ti were achieved using an advancing speed of 50 mm/min and rotation speeds in the range of 700-1100 rpm. Aluminum 1060 and titanium alloy Ti-6Al-4V plates were lap joined by friction stir welding, hence the ultimate tensile shear strength of joint reached 100% of Al 1060. Mg alloy and Ti were successfully butt joined by inserting a probe into the Mg alloy plate with slightly offsetting. But Ti-Al intermetallic compound layers formed at the interface of these joints.