• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.208-208
• /
• 2017

No-tillage practices are expected to provide several benefits such as increasing soil organic matter, reducing labor time and saving energy cost compared with conventional tillage practices. This study was conducted to investigate the effects of no-tillage dry-seeding on rice growth and soil properties in comparison with other rice cultivation methods, machine transplanting and wet-hill-seeding on puddled paddy. Rice seedling establishment was slightly higher in no-tillage dry-seeding treatment ($145seedling\;m^{-2}$) than wet-hill-seeding on puddled paddy treatment ($111seedling\;m^{-2}$), but the seedling establishment in both treatments fell within the optimum range for direct seeding rice cultivation. Plant height, number of tillers and chlorophyll content (SPAD value) of rice in no-tillage dry-seeding treatment were higher than those of the other treatments. However, no significant differences in grain yield was observed among three cultivation methods, and the yield ranged 5.8 to $5.9ton\;ha^{-1}$. The heading date from seeding under no-tillage dry-seeding treatment was on average 109 days, which was similar to that under machine transplanting treatment (112 days), but 10 days later than that under wet-hill-seeding on puddled paddy treatment (99 days). Grain quality characteristics grown in no-tillage dry-seeding were similar to those grown in the other cultivation methods. These results indicate that no-tillage dry-seeding practice is comparable to conventional tillage system in terms of seedling establishment, growth, yields and grain quality.

• 한국작물학회지
• /
• 제46권5호
• /
• pp.380-386
• /
• 2001

Dry matter(DM) accumulation in different plant parts of two Vigna spp., blackgram(Vigna mungo) and mungbean(Vigna radiata), was compared at different levels of salinity. Two vaarieties of each of blackgram (Barimash-1 and Barimash-2) and mungbean(Barimung-3 and Barimung-4) were grown with 50, 75 and 100mM NaCl solutions and tap water as a control till maturity. The DM accumulation in all plant parts of the two crops devreased with the increasing salinity levels. The reducation was severe in mungbean compared to blackgram. On an average mungbean produced only 3% grain yield compared to 37% in blackgram at 100mM NaCl. The salinity induced growth reduction was relatively less in Barimash-2 than that in Barimash-1. In mungbean, the relative DM production of Barimung-3 was greater than Barimung-4. The extent of biomass reducation due to salinity in different plant parts was not similar. At maturity the rank of biomass accumulation (at 100 mM NaCl) in different plant parts of blackgram was in decreasing order by seeds pod$^{-1}$ (97%), branch plant$^{-1}$ (88%), 1000-grain weight (79%), plant height(72%), pods plant$^{-1}$ (50%), leaf weight and root mass(both 49%) and stem weight (48%). In mungbean, the rank was in decreasing order by 1000-grain weight (57%), leaf weight (54%), plant height (52%), seeds pod$^{-1}$ (50%), branch plant$^{-1}$ (41%), root weight (34%), stem weight (24%) and pods plant$^{-1}$ (6%). Therefore, salinity reduced grain yield more than straw and roots of the Vignaq spp., and blackgram is relatively more salt-tolerant than mungbean.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.II
• /
• pp.396-404
• /
• 2000

Post harvest processes for rice include drying, storage and processing. Drying has a great effect on the quality of the grain. The existing rice centers are with the ill equipped, especially with drying and storage facilities. The rice harvesting has bully mechanized, a large volume of rice with high moisture content are taken to the rice processing complex(RPC). Three, the need for drying and storage facilities becomes more urgent. At present the daily drying capacity of RPC can't exceed over 40~50 M/T. Therefore new technology and facilities for a high quality and main efficient drying should be introduced one such technology is the continuous flow drying system. This research, aims to test performance efficiency the mixed continuous flow grain dryer was whose daily drying capacity is 100 M/T. The results of the performance tests of the dryer are shown as follows; (1) The temperature distribution of the drying modules were measured by a temperature recorder. The fifth module showed the highest value, followed by the seventh and the third. (2) When the intake air temperature was $55^{circ}C$, the drying rates were 1.7 and 2.6%, wb/pass in the exhaust temperatures of 20 and $22^{circ}C$. And when the intake air temperature was $60^{circ}C$, the drying rates were 1.7 and 2.3%, wb/pass in the exhaust temperatures of 22 and $25^{circ}C$. (3) The average increased rate of cracked grains after the drying process was 0.7% which is below the tolerance limit (2.0%) of the continuous grain dryer.

• 한국작물학회지
• /
• 제51권7호
• /
• pp.618-623
• /
• 2006

쌀의 외관 기호도에 영향을 미치는 몇가지 관련 특성을 검토하고 이들의 상호관계를 구명함으로써 쌀 외관품질의 등급화를 위한 기초자료를 확보하고자 국내에서 주로 재배되고 있는 자포니카 44품종 쌀에 대한 외관기호도와 관련 특성을 조사 및 평가하여 얻어진 결과는 다음과 같다. 1. 쌀의 색기호도는 외관품질(r=-0.897) 및 적색도(r=-0.893)와 유의한 부의 상관을 나타내었다. 2. 외관품질(적색도${\times}$황색도)은 색에 의한 쌀 외관의 등급화에 유용하게 활용될 수 있을 것으로 판단되었다. 3. 쌀의 모양에 대한 기호도는 입폭(r=0.527)과 입의 크기(r=0.454)가 유의한 정 상관을 나타내었다. 4. 쌀의 외관에 대한 기호도의 군집분석결과 5개의 그룹으로 분류되었으며 그룹별 품질은 외관품질, 입폭 및 입크기 등에 의해 품질등급화가 가능할 것으로 판단되었다.

• Advances in materials Research
• /
• 제1권1호
• /
• pp.51-74
• /
• 2012

A powder metallurgy-based rapid consolidation technique, Plasma Pressure Compaction ($P^2C^{(R)}$), was utilized to produce near-net shape parts of gamma titanium aluminides (${\gamma}$-TiAl). Micron-sized ${\gamma}$-TiAl powders, composed of Ti-50%Al and Ti-48%Al-2%Cr-2%Nb (at%), were rapidly consolidated to form near-net shape ${\gamma}$-TiAl parts in the form of 1.0" (25.4 mm) diameter discs, as well as $3"{\times}2.25"$ ($76.2mm{\times}57.2mm$) tiles, having a thickness of 0.25" (6.35 mm). The ${\gamma}$-TiAl parts were consolidated to near theoretical density. The microstructural morphology of the consolidated parts was found to vary with consolidation conditions. Mechanical properties exhibited a strong dependence on microstructural morphology and grain size. Because of the rapid consolidation process used here, grain growth during consolidation was minimal, which in turn led to enhanced mechanical properties. Consolidated ${\gamma}$-TiAl samples corresponding to Ti-48%Al-2%Cr-2%Nb composition with a duplex microstructure (with an average grain size of $5{\mu}m$) exhibited superior mechanical properties. Flexural strength, ductility, elastic modulus and fracture toughness for these samples were as high as 1238 MPa, 2.3%, 154.58 GPa and 17.95 MPa $m^{1/2}$, respectively. The high temperature mechanical properties of the consolidated ${\gamma}$-TiAl samples were characterized in air and vacuum and were found to retain flexural strength and elastic modulus for temperatures up to $700^{\circ}C$. At high temperatures, the flexural strength of ${\gamma}$-TiAl samples with Ti-50%Al composition deteriorated in air by 10% as compared to that in vacuum. ${\gamma}$-TiAl samples with Ti-48%Al-2%Nb-2%Cr composition exhibited better if not equal flexural strength in air than in vacuum at high temperatures.

• 한국전기전자재료학회논문지
• /
• 제11권1호
• /
• pp.48-56
• /
• 1998

Pr\ulcornerO\ulcorner-based ZnO varistors were fabricated in the range of $Y_2$O$_3$additive content from 0.5 to 4.0mol%, and its microstructure and electrical properties were investigated. Yttrium was distributed nearly in the grain boundaries and the cluster phase formed at nodal point but more in cluster phase. The average grain size was decreased markedly from 34.9 to 8.6${\mu}{\textrm}{m}$ with increasing $Y_2$O$_3$additive content. It is believed that the decrease of grain size is attributed to the formation of cluster phase and the weakening of driving force for liquid sintering. As a result, $Y_2$O$_3$was acted as the inhibitor of the grain growth. With increasing $Y_2$O$_3$additive content, the varistor voltage, the activation energy, and the nonlinear exponent increased whereas the leakage current decreased, especially 4.0mol% $Y_2$O$_3$-added varistor exhibited very good I-V characteristics; nonlinear exponent 87.42 and leakage current 46.77nA. On the other hand, as $Y_2$O$_3$additive content increases, the varistor showed tendency of the salient decrease for donor concentration and the increase for barrier height. Conclusively, it is estimated that ZnO:Pr varistor compositions added more than 2.0mol% $Y_2$O$_3$are to be used to fabricate useful varistors.

• 열처리공학회지
• /
• 제32권6호
• /
• pp.263-269
• /
• 2019

The mechanism of microstructure and hardness changes during mill annealing of Ti-6Al-4V alloy was investigated. The annealing heat treatments were performed at $675{\sim}795^{\circ}C$ in vacuum for 2 hours, followed by air cooling. The microstructure was observed by using an optical microscope and X-ray diffraction, and hardness was measured by using a Rockwell hardness tester and micro Vickers hardness tester. The average grain size becomes smaller at $675^{\circ}C$ to $735^{\circ}C$ due to the formation of new grains rather than grain growth, but becomes larger at $735^{\circ}C$ to $795^{\circ}C$ due to growth of the already-formed grains rather than formation of new grains. The mill annealing temperature becomes higher, the ${\beta}$ phase fraction decreases and ${\alpha}$ phase fraction increases at room temperature. This is because the higher annealing temperature, the smaller amount of V present in the ${\beta}$ phase, and thus the ${\beta}$ to ${\alpha}$ transformation occurs more easily when cooled to room temperature. As the mill annealing temperature increases, the hardness value tends to decrease, mainly due to resolution of defects such as dislocations from $675^{\circ}C$ to $735^{\circ}C$ and due to grain growth from $735^{\circ}C$ to $795^{\circ}C$, respectively.

• 소성∙가공
• /
• 제28권5호
• /
• pp.257-265
• /
• 2019

Multi-axial forging (MAF), a severe plastic deformation technique, is known to be difficult to obtain materials with homogeneous microstructures. Recently, multi-axial diagonal forging (MADF) process has been developed to solve this problem. In this study, in order to compare the microstructural and mechanical homogeneities of the MAFed and MADFed samples, oxygen-free copper (OFC) cubes measuring 25 mm in length were deformed through MAF and MADF processes and the average grain size and hardness were measured at the edge, face, and center regions of the samples. In the MAFed samples, ultrafine grains were formed at the center region, but a considerable amount of coarse grains remain at the face region. Therefore, the MAFed samples showed a high inhomogeneity in regards to grain size and hardness. On the contrary, in the case of the MADFed sample, the grain sizes at the edge, face, and center regions were similar and the hardness in all the regions are almost similar. This indicates that the MADFed sample has a homogeneous microstructure and uniform mechanical properties, which can be attributed to the homogeneous distribution of the effective strain throughout the material. The results of this study suggests that the MADF is a suitable process in the fabrication of high-strength copper materials with a homogeneous and ultrafine grain structure.

• 한국재료학회지
• /
• 제31권10호
• /
• pp.576-581
• /
• 2021

To improve the shortcomings and expand the advantages of the single-roll melt drag method, which is a type of continuous strip casting method, the melt drag method with a molding belt is applied to AZ31 magnesium alloy. By attaching the forming belt to the melt drag method, the cooling condition of the thin plate is improved, making it possible to manufacture thin plates even at high roll speed of 100 m/min or more. In addition, it is very effective for continuous production of thin plates to suppress oxidation of the molten metal on the roll contact surface by selecting the protective gas. As a result of investigating the relationship between the contact time between the molten metal and the roll and the thickness of the sheet, it is possible to estimate the thickness of the sheet from the experimental conditions. The relationship between the thin plate thickness and the grain size is one in which the thinner the thin plate is, the faster the cooling rate of the thin plate is, resulting in finer grain size. The contact state between the molten metal and the roll greatly affects the grain size, and the minimum average grain size is 72 ㎛. The thin plate produced using this experimental equipment can be rolled, and the rolled sample has no large cracks. The tensile test results show a tensile strength of 303 MPa.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2023년도 학술발표회
• /
• pp.394-394
• /
• 2023

The world's sustainable growth is being severely hampered by the inefficient use of water resources. Despite the widely acknowledged importance of trade in global and regional water and food security, societal reliance on local production as well as international trade remains inadequately assessed. Therefore, using South Korea as a case study, this study fills in this research gap by applying the virtual water concept, the logarithmic mean divisia index (LMDI) method, and the Tapio decoupling model. The virtual water concept was used to estimate South Korea's net virtual water trade for major grain crops from 1992 to 2017. Then, the LMDI method was utilized to assess the driving factors causing changes in net virtual water trade. Lastly, the Tapio decoupling model was used to investigate the decoupling relationships between economic growth and the driving factors of net virtual water trade. Results showed that South Korea remains a net importer of virtual water flows with respect to grain crops, with an average import of 16,559.24 million m³ over the study period. In addition, the change in net virtual water trade could be attributed to water intensity effect, product structure effect, economic effect, and population effect. However, water intensity and economic effects were the major decisive factors for decrease and increase in net virtual water trade respectively, while the population and product structure effects had minor positive influences on the net virtual water trade. Furthermore, water intensity and economic growth showed a strong decoupling in most periods, while the decoupling state between product structure and economic growth was observed as expansive negative decoupling. Likewise, population size and economic growth showed a weak decoupling in most periods. The results reveal South Korea's status as it concerns the virtual water trade of grain crops, thus providing valuable insights into the sustainability of trade activities for the management of local water resources.