PURPOSE. This study evaluated the relationship among translucency, crystalline phase, grain size, and fracture toughness of zirconia. MATERIALS AND METHODS. Four commercial zirconia - Prettau®Anterior® (PA), Prettau® (P), InCorisZI (ZI), and InCorisTZI (TZI)- were selected for this study. The bar specimens were prepared to determine fracture toughness by using chevron notched beam method with four-point bending test. The grain size was evaluated by a mean linear intercept method using a scanning electron microscope. X-ray diffraction and Rietveld refinement were performed to evaluate the amount of tetragonal and cubic phases of zirconia. Contrast ratio (CR) was measured to investigate the level of translucency. RESULTS. PA had the lowest fracture toughness among other groups (P < .05). In addition, the mean fracture toughness of P was significantly less than that of ZI, but there was no difference compared with TZI. Regarding grain size measurement, PA had the largest average grain size among the groups. P obtained larger grain size than ZI and TZI (P < .05). However, there was no significant difference between ZI and TZI. Moreover, PA had the lowest CR value compared with the other groups (P < .05). This means PA was the most translucent material in this study. Rietveld refinement found that PA presented the greatest percentage of cubic phase, followed by TZI, ZI, and P, respectively. CONCLUSION. The different approaches are used by manufacturers to fabricate various types of translucent zirconia with different levels of translucency and mechanical properties, which should be concerned for material selection for successful clinical outcome.
Woon-Ha Hwang;Hyen-Seok Lee;Seo-Yeong Yang;Chung-gun Lee
KOREAN JOURNAL OF CROP SCIENCE
/
v.68
no.1
/
pp.1-7
/
2023
We studied the changes in growth characteristics of major cultivated rice in low- density transplanting. The culm and spikelet length did not change in low density transplanting conditions. As the distance between hills increased by 10 cm, the number of tillers per hill increased by an average of 4.4 and the number of grains per spikelet increased by 7.5. The cultivar that had more tillers and higher grain number in 80 hills per 3.3 m2 tended to have more tillers and grain in low-density transplanting conditions. However, the increase rate of tillers and grain in low-density transplanting was not significanty different from the tiller and grain number in 80 hills per 3.3 m2. The total branch number and branch length in spikelets increased in low-density transplanting conditions. The grain number per spikelet was also increased by the in low-density transplanting method.
Journal of Korean Society of Coastal and Ocean Engineers
/
v.35
no.6
/
pp.164-172
/
2023
The grain size distribution of sand provides crucial information for understanding coastal erosion and sediment deposition. The commonly used sieve analysis for grain size distribution analysis has limitations such as time-consuming processes and the inability to obtain information about individual particle shapes and colors. In this study, we propose a grain size distribution analysis method using smartphone digital images, which is simpler and more efficient than the sieve analysis method. During the image analysis process, we effectively detect particles from relatively low-resolution smartphone digital images by extracting particle boundaries through image gradient calculation. Using samples collected from four beaches in Gyeongsangbuk-do, we compare and validate the proposed boundary extraction image analysis method with the analysis method that does not extract boundaries, against sieve analysis results. The proposed method shows an average error rate of 8.21% at D50, exhibiting a 65% lower error compared to the method without boundary extraction. Therefore, grain size distribution analysis using smartphone digital images is convenient, efficient, and demonstrated accuracy comparable to sieve analysis.
The effect of microstructure of WC-Co substrates which have different WC grain sizes from submicron to 5 $\mu$m on the diamond-substrate adhesion strength was investigated. The substrates were pre-treated by two methods : chemical etching with Murakami's solution and subsequently with $H_2SO_4$, and thermal heat-treatment. The adhesion strength was estimated by degree of peeling after Rockwell indentation. Diamond films of 20 $\mu$m thickness deposited on the heat-treated substrates showed an excellent adhesion strength at the load of 100 kg, which ascribed to the large and elongated WC grains. However, the cutting edge of insert was deformed after heat treatment and the surface morphology of heat treated substrate strongly affected on the surface roughness of the deposited diamond films. On the contrary, the diamond film of 10 $\mu$m in thickness on the chemically etched substrates of average WC grain size over 2 $\mu$m showed good adhesion strength enough not to peel-off under a load of 60 kg. Especially, the substrate of average WC grain size over 5 $\mu$m exhibited much improved reliability of adhesion comparing with the substrate of average grain size under 2 $\mu$m. No substrate deformation was observed in this case after the chemical etching, which is more advantageous and more practical in terms of precious machining than the heat treatment case.
Lee Sun Hyung;Won Jong Gun;Choi Jang Soo;Ahn Duok Jong;Choi Ky Yeon;Lee Woo Gyeong;Park So Deuk;Son Jae Keun
KOREAN JOURNAL OF CROP SCIENCE
/
v.50
no.spc1
/
pp.94-98
/
2005
This study was carried out to provide the geographic information based on the distribution of rice qualities and palatability in Gyeoungbuk province of Korea. The rice grain quality and environmental factors were analyzed using 513 sampling sites based on different five-agroclimtic regions of Gyeoungbuk province during three years from 2002 to 2004. In rice grain quality characteristics, the average palatability was low in South eastern coastal and Tabaek semi alpine regions as $67.6\~68.3$ and the coefficient of variation (CV) was relatively high as $6.2\~7.4\%$. The average head rice rates were low in South and Central eastern coastal regions as $87.3\~88.2\%$ and CV was high as $8.2\~8.3\%$. The average protein content was high in Central eastern coastal regions as $8.0\%$ and CV was high as $8.2\~8.3\%$. In case of palatability, the variation was differed clearly between high and low agroclimatic regions; it means that it is possible to divide the same agroclimatic region of high CV into two or three areas by CV of palatability. As the results of subdividing each existing agroclimatic regions based on the palatability, the variation of grain quality characteristics was become lower than that of existing five-agroclimatic regions. Therefore, the re-establishing of agroclimatic region based on rice grain quality was very important for precise cultivation for rice.
Bae, Hyun Kyung;Oh, Seong Hwan;Yi, Hwi Jong;Seo, Jong Ho;Hwang, Chung Dong;Choi, Won Yeung;Kim, Sang Yeol;Oh, Myung Kyu
Proceedings of the Korean Society of Crop Science Conference
/
2017.06a
/
pp.300-300
/
2017
'Saemimyeon' a Tongil-type rice variety (Indica ${\times}$ Japonica), which contains high amylose contents is suitable for rice noodle production. Nowadays, the major parts of rice processing industry that includes products like rice flour and noodles are expected to partially replace wheat flour market. The volume of rice noodle market is getting bigger and can contribute to the rice surplus and farmer's income. This study was carried out to promote productivity and flour-making quality of 'Saemimyeon' by finding the most suitable transplanting and harvesting times. The transplanting days used were May $10^{th}$, May $17^{th}$, May $24^{th}$, May $31^{th}$, June $7^{th}$ and June $14^{th}$ and the planting distance used was 30 x 12cm. In addition, harvesting time was determined by days after heading time (40, 45, 50, 55 and 60 days). The field experiment was conducted at the experimental field in Miryang (Southern plain area of Korea) from 2015 to 2016. Our results suggest that the optimum transplanting days were from May $24^{th}$ to May $31^{th}$ which resulted to an average yield of 748~751kg/10a. Interestingly, yield was sharply decreased below 700kg/10a before May $10^{th}$ and after June $7^{th}$. The average grain filling rate before May $31^{th}$ was more than 83% but it declined to 75% after June $7^{th}$. The average temperature ranges from heading time to harvesting time was $ 21\sim25^{\circ}C$ and the estimated optimal temperature was $23.4^{\circ}C$ which is similar to May $24^{th}$ by regression equation. We found that the optimal harvest time was 45~50 days after heading time. It is hypothesized that low temperature at seed maturation time caused the lower grain filling rate therefore 'Saemimyeon' need to be transplanted before May $31^{th}$ for higher productivity. We found no statistical variation in amylose contents among experimental plots (28.2~30.4%). We conclude that the productivity of 'Saemimyeon' highly depends on temperature that is critical for grain filling stage controlled by transplanting time.
Seven rice varieties and $42F_1$ hybrids of $7{\times}7$ diallel cross were used in genetic analysis for grain size, weight and shape. Effects of average heterosis for grain length and shape showed significantly negative values. GCA, SCA and RCA variances were significant for all characters and also additive variance was more important than dominance variance for grain length, width, thickness and weight. GCA effects of BG 2 and Arborio were highly positive for grain size and weight, and those of BG 2 and Nagdongbyeo were highly negative for grain shape. Partial dominance was observed for all characters. The direction of dominance was negative for grain length, width and shape, and ambidirections for grain thickness and weight. The effective gene number was two for grain length and shape. Both narrow and broad sense heritability were high in all characters.
To compare the rice yield and grain quality characteristics between mature(MPF) and reclaimed paddy field(RPF), grain yield and its components, some physicochemical properties of rice grain and palatability of cooked rice were investigated for Dongjinbyeo grown at three different locations of mature and reclaimed paddy field, respectively, in south western part of Korea. Variation of culm length in mature paddy area was larger than that in reclaimed saline area. Panicle number per m$^2$ in RPF was more then that in MPF but grain number per m$^2$, filled grain ratio and 1, 000-grain weight in RPF were lower than those in MPT. Average yield of milled rice in RPF was 12% lower than that in MPF (5.l1t /ha). Daejeon showed the highest yielding among MPF and Yeongam reveald the highest grain production among RPF. RPF rices had slightly higher carbohydrate content and alkali digestibility but lower protein, fat and amylose content compared with MPF rices. RPF rices also exhibited higher mineral contents, Mg/K ratio, peak and hot viscosity compared with MPF rices. RPF rice showed slightly poor apparent grain quality but a little better eating quality of cooked rice compared with MPF rice.
S. K. Hyun;Eun-Woong Lee;Chung-Yong Lee;Yong-Woong Kwon
KOREAN JOURNAL OF CROP SCIENCE
/
v.8
no.1
/
pp.1-4
/
1970
To study the varital response of grain, protein and oil yield to different sowing dates and calcium levels in soybean, the most important crop as a protein source in Korea, this experiment was conducted in 1969. Three leading soybean varieties (Choongbukbaek, Ryooku#3 and Changdanbaekmok) were sown at May 22,, June 11 and July 1 under 3 different calcium levels, 0.50 and 100kg per 10a respectively. The results are summarized as follows: 1. Ryonku #3 showed the highest grain yield because of the highest number of pods per hill. In order of protein content, and oil content of grain, Choongbukbaek>Ryooku#3>Changdanbaekmok and Changdanbaekmok>Choogbukbaek>Ryooku#3 were found. Ryooku#3 also showed the highest protein and oil production per unit area owing to the highest grain yield. However. varietal differences of the grain yield the protein and the oil production per unit area varied along the different sowing dates. Interactions between varieties and sowing date on the grain yield should be considered in practice. 2. No difference in the grain yield was found between the first sowing date (May22) and the second (June11) on average. The grain yield in the plot of the third sowing date (July l)was strikingly decreased mainly by the smaller number of pods per hill. The protein and the oil content were not varied significantly by the different sowing dates. The protein and oil production per unit area were lowest in the plot of the third sowing date owing to the decreased grain yield. 3. More calcium application increased the number of branches per hill, the number of pods per hill, and the grain yield. The highest grain yield was found in the plot received 100 kg of calcium hydroxide per 10are. Protein content increased in higher calcium level, but oil content was highest in the plot of noncalcium. More protein production per unit area was gotten by more calcium application because of higher grain yield and protein content. all production increased in higher calcium level by the increased grain yield. 4. High plus (+) correlation was found between stem length and stem weight per hill stem length and grain weight, stem length and grain yield, stem weight per hill and number of pods per hill and grain weight, number of branches per hill and grain weight, number of pods per hill and grain yield, and grain weight and protein content of grain. Minus(-) correlation was recognized between number of pods per hill and grain weight.
Nine surface sediments from Masan Bay and Gadeog Channel were taken for grain size and geochemical and foraminiferal analyses in August 2002. The sediments consist of mud with 7.29-8.54 $\phi$ in mean grain size. Average concentrations of Al, Fe and Mn are higher in Gadeog Channel than those in Masan Bay. On the other hand, average concentrations of Pb, Cu, Zn, Cd, Cr, Ni and V are higher in Masan Bay than those in the channel. The latter group of elements show the highest concentration at station M4, off the outfall of treated wastewater disposal. Eighty-one foraminiferal species are identified in total assemblages, including 21 species of living populations. The number of individuals, species number, species diversity and equitability in Masan Bay have lower values than those in Gadeog Channel. The foraminiferal fauna off the outfall is relatively poor. Compared to geochemical and foraminiferal data obtained in 1996, heavy metals are more enriched, and the characteristics of foraminifera are little changed. These features indicate that the pollution of Masan Bay has not been reduced.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.