• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.4
• /
• pp.1296-1309
• /
• 2023

In this paper, based on the soft cancellation (SCAN) bit-flipping (SCAN-BF) algorithm, a generalized SCAN bit-flipping (GSCAN-BF-Ω) decoding algorithm is carried out, where Ω represents the number of bits flipped or corrected at the same time. GSCAN-BF-Ω algorithm corrects the prior information of the code bits and flips the prior information of the unreliable information bits simultaneously to improve the block error rate (BLER) performance. Then, a joint threshold scheme for the GSCAN-BF-2 decoding algorithm is proposed to reduce the average decoding complexity by considering both the bit channel quality and the reliability of the coded bits. Simulation results show that the GSCAN-BF-Ω decoding algorithm reduces the average decoding latency while getting performance gains compared to the common multiple SCAN bit-flipping decoding algorithm. And the GSCAN-BF-2 decoding algorithm with the joint threshold reduces the average decoding latency further by approximately 50% with only a slight performance loss compared to the GSCAN-BF-2 decoding algorithm.

• The KIPS Transactions:PartC
• /
• v.13C no.2 s.105
• /
• pp.241-248
• /
• 2006

Mobile computing has such characteristics as portability, wireless network, mobility, etc. These characteristics cause various problems to mobile terminals like frequent disconnection, high error rate, and varying network status. These problems motivate us to develop an adaptive error control mechanism for supporting multimedia service in mobile computing environment. In this paper, we propose the Adaptive Error Control(AEC) scheme using client's buffer size and current error rate. After categorizing the status into four groups according to client's buffer size and current error rate, this scheme applies an appropriate error control scheme to each status. In this scheme, thresholds of buffer size and error rate are determined by the data transmission time, play rate and average VOP size, and by the probability of error for a sequence of packets. The performance of proposed scheme is evaluated by flaying MPEG-4 files on an experimental client/server environment, respectively. The results show that error correcting rate is similar to other schemes while the time for correcting error reduce a little. In addition, the size of data for correcting error is decreased by 23% compared with FEC and Hybrid FEC, respectively. Theses results demonstrate that the proposed scheme is more suitable in mobile computing environment with small bandwidth and varying environment than existing schemes.

• Journal of Auto-vehicle Safety Association
• /
• v.14 no.2
• /
• pp.57-69
• /
• 2022

Recently, as interest in self-driving cars has increased worldwide, research and development on the Advanced Driver Assist System is actively underway. Among them, the purpose of Adaptive Cruise Control (ACC) is to minimize the driver's driving fatigue through the control of the vehicle's longitudinal speed and relative distance. In this study, for the research of the ACC test in the real environment, the real-road test was conducted based on domestic-road test scenario proposed in preceding study, considering ISO 15622 test method. In this case, the distance measurement method using the dual camera was verified by comparing and analyzing the result of using the dual camera and the result of using the measurement equipment. As a result of the comparison, two results could be derived. First, the relative distance after stabilizing the ACC was compared. As a result of the comparison, it was found that the minimum error rate was 0.251% in the first test of scenario 8 and the maximum error rate was 4.202% in the third test of scenario 9. Second, the result of the same time was compared. As a result of the comparison, it was found that the minimum error rate was 0.000% in the second test of scenario 10 and the maximum error rate was 9.945% in the second test of scenario 1. However, the average error rate for all scenarios was within 3%. It was determined that the representative cause of the maximum error occurred in the dual camera installed in the test vehicle. There were problems such as shaking caused by road surface vibration and air resistance during driving, changes in ambient brightness, and the process of focusing the video. Accordingly, it was determined that the result of calculating the distance to the preceding vehicle in the image where the problem occurred was incorrect. In the development stage of ADAS such as ACC, it is judged that only dual cameras can reduce the cost burden according to the above derivation of test results.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.309-310
• /
• 2008

In this paper, we propose a novel D-ATR (Differential-Average Transmitted Reference) scheme for UWB (Ultra Wide Band) based on impulse radio. The proposed scheme utilizing differential coding at transceiver, does not cause half loss of data rate unlike the conventional TR (Transmitted Reference) and ATR (Average TR) systems which transmit additional reference signals. In addition, the proposed scheme may provide improved BER (Bit Error Rate) performance by averaging the received reference signals like the conventional ATR. The proposed D-ATR receiver produces the averaged reference template by considering both the detected data bit and the differential coding rule.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.3
• /
• pp.112-117
• /
• 2020

NAND flash memory is a non-volatile memory that retains stored data even without power supply. Internal memory used as a data storage device and solid-state drive (SSD) is used in portable devices such as smartphones and digital cameras. However, NAND flash memory carries the risk of electric shock, which can cause errors during read/write operations, so use error correction codes to ensure reliability. It efficiently recovers bad block information, which is a defect in NAND flash memory. BBT (Bad Block Table) is configured to manage data to increase stability, and as a result of experimenting with the error correction code algorithm, the bit error rate per page unit of 4Mbytes memory was on average 0ppm, and 100ppm without error correction code. Through the error correction code algorithm, data stability and reliability can be improved.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.210-212
• /
• 1996

Random drift rate (i.e., random drift in angle rate) of a gyro represents the major error source of inertial navigation systems that are required to operate over long time intervals. It is uncorrectable and leads to an increase in the error with the passage of time. In this paper a technique is presented for analyzing random process from experimental data and the results are presented. The problem of estimating the a priori statistics of a random process is considered using time averages of experimental data. Time averages are calculated and used in the optimal data-processing techniques to determine the statistics of the random process. Therefore the contribution each component to the gyro drift process can be quantitatively measured by its statistics. The above techniques will be applied to actual gyro drift rate data with satisfactory results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12C
• /
• pp.1014-1020
• /
• 2008

Storage devices such as memories are widely used in various electronic products. They require high-density memory and currently the data has been stored in multi-level format, that results in high error rate. In this paper, we apply error correction schemes that are widely used in communication system to the storage devices for satisfying low bit error rate and high code rate. In A WGN channel with average BER $10^{-5}$ and $5{\times}10^{-6}$, we study error correction schemes for 4-1evel cell to achieve target code rate 0.99 and target BER $10^{-11}$ and $10^{-13}$, respectively. Since block codes may perform better than the concatenated codes for high code rate, and it is important to use less degraded inner code even when many bits are punctured. The performance of concatenated codes using general feedforward systematic convolutional codes are worse than the block code only scheme. The simulation results show that RSC codes must be used as inner codes to achieve good performance of punctured convolutional codes for high code rate.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.9A
• /
• pp.710-716
• /
• 2003

OFDM is a very attractive technique for achieving high-bit-rate data transmission and high spectrum efficiency. However one of disadvantages of OFDM signal is the high PAPR characteristic when multicarriers are added up coherently. In this paper, we propose an adaptive PTS scheme using two threshold levels for PAPR reduction and reducing the amount of PAPR calculations with clipping scheme. Simulation results show that it is almost same between average bit error rate performance of the proposed scheme and that of a conventional scheme. Also, we obtain a great performance gain in the amount of calculations compared to the conventional scheme. Therefore, proposed system has a good performance in data processing time in OFDM wireless communication systems.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.4 s.193
• /
• pp.93-101
• /
• 2007

Aluminum alloy which is one of the light materials has been tried to apply to light weight vehicle body. In order to do that, welding technology is very important. In case of the aluminum laser welding, the strength of welded part is reduced due to porosity, underfill, and magnesium loss. To overcome these problems, laser welding of aluminum with filler wire was suggested. In this study, experiment about laser welding of AA5182 aluminum alloy with AA5356 filler wire was performed according to process parameters such as laser power, welding speed and wire feed rate. The tensile strength was measured to find the weldability of laser welding with filler wire. The models to estimate tensile strength were suggested using three regression models and one neural network model. For regression models, one was the multiple linear regression model, another was the second order polynomial regression model, and the other was the multiple nonlinear regression model. Neural network model with 2 hidden layers which had 5 and 3 nodes respectively was investigated to find the most suitable model for the system. Estimation performance was evaluated for each model using the average error rate. Among the three regression models, the second order polynomial regression model had the best estimation performance. For all models, neural network model has the best estimation performance.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.14 no.1
• /
• pp.6-17
• /
• 2007

Purpose: This study was carried out to investigate perception and experience of medication errors by nurses. Method: Data collection through a survey was performed using structured questionnaires over the period of September 1 to October 15, 2004. Questionnaire were delivered to 222 nurses from 15 hospitals; thereafter, 205 questionnaires were responded (i.e., 92% response rate). The subject in the study was a nurse who had been working in the hospital for less than one year. Results: The average perception rate was 87.5%. The perception rates of subjects in medication errors from four areas are 62% in wrong dosage form for drug administration, 61.5% in air into an IV set, 63% in crystals in an IV lines, and 83.5% in wrong time. The experience rates of subjects in medication errors from four areas are 85.5% in wrong time, 39.5% in wrong injection site, 34.5% in omission error, and 28% in wrong patient. Conclusion: The average perception rate and experience rates of medication errors were 87.5% and 23.5%, respectively. Education about the Five right in medication and knowledges about drugs would improve the perception of medication errors of nurses whose work experience is less than one year, and prevent them from medication errors.