• Journal of Korea Entertainment Industry Association
• /
• v.14 no.8
• /
• pp.197-202
• /
• 2020

In this study, we investigate the effect of twenties female caffeine addiction on cardiorespiratory capacity. For this study, we divided 35 female students at H university into caffeine addict group(n=17) and none caffeine addict group(n=18). Measure maximal oxygen uptake, maximal energy consumption and METs using Cycle Ergometer to assess cardiac capacity. Measure peak inspiratory pressure, peak inspiratory flow rate, peak inspiratory capacity, average inspiratory pressure, average inspiratory flow rate, average inspiratory capacity using Power Breathe K5 to assess respiratory capacity. As a result, cardiac capacity showed a statistically significant decrease in maximal oxgen uptake and METs compared caffeine addict group to none caffeine addict group(p<.001). respiratory capacity showed a statistically significant decrease in peak inspiratory pressure(p<.05), peak inspiratory flow rate(p<.01), average inspiratory pressure(p<.01), average inspiratory flow rate(p<.01), compared caffeine addict group to none caffeine addict group. Combining the results of the study, we could see that caffeine addiction reduces the cardiorespiratory capacity in twenties female. Therefore, it could be used as a basis date to prevent caffeine addiction for twenties female.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1612-1615
• /
• 2009

Water supply reliability indexes (WSRI) is estimated for assessment of water supply capacity in the downstream for parallel reservoir system in Nakdong River, South Korea, using allocation rule (AR) according to the water supply capacity of each reservoir and the characteristic of parallel reservoir system. The result of the analyzing parallel reservoir system for Andong and Imha reservoir in Nakdong River does not include evidences available enough to decide whether the results of water supply analysis are excellent in the current reliability evaluation or not. However, AR (C) shows a good result in the water supply capacity for each reservoir based on the connected operation system and the total water supply capacity at the control point of downstream by the average water supply capacity and possible range of water supply capacity suggested by this study. The average water supply capacity is analyzed by the reliability of monthly average water supply capacity. Furthermore, the possible range of water supply capacity is estimated by the standard deviation when water deficit occurs. Therefore, AR (C) is useful to establish and estimate the planning water supply capacity according to the monthly water supply condition and the possible range of water supply capacity when the water supply capacity deficit occurs, South Korea.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.21 no.1
• /
• pp.53-62
• /
• 1979

Since the first installation of irrigation Systems in Korea , a large number of small and medium sized reservoirs have been constructed as the main water sources Some 412, 000 ha are at present irrigated from these sources of supply. Many of the reservoirs were designed in accordance with old low standards and have in addition suffered a loss in capacity through sedimentation. At the same time, water demand has increased with the in troduction of high yielding varieties of rice. The combination has resulted in severe water deficits. To study the problem, 16 sample reservoirs have been surveyed and analysed. The results of the study are summarized be low: 1. Average decrease in reservoir capacity from the installation to present-8% 2. Average soil erosion loss (m$^3$/km$^2$/year) is 536 m$^3$/km$^2$/year and average erosion depth of soil is 0. 5mm per year. 3. No relationship, between reservoir capacity per unit of watershed (m$^3$/km$^2$) and soil erosion loss was found. 4. Increases are required in reservoir capacity: 15.8% due to the introduction of HYV's; 16.6% due to the change of system losses from 10%to 25% The conclusion to be drawn from the above results is that existing reservoir capacity should be increased by an average of 32%. The unit storage capacity to be adopted should be 661 mm

• Journal of the Korean Statistical Society
• /
• v.32 no.1
• /
• pp.65-71
• /
• 2003

We consider the finite dam with compound Poisson inputs which is called M/G/1 finite dam. We assign some costs related to operating the dam and calculate the long-run average cost per unit time. Then, we find the optimal dam capacity under which the average costs is minimized.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2001.10a
• /
• pp.87-90
• /
• 2001

In particle or short-fiber reinforced composites, cracking of the reinforcements is a significant damage mode because the broken reinforcements lose load carrying capacity. This paper deals with elastic stress distributions and load carrying capacity of intact and cracked ellipsoidal inhomogeneities. Three dimensional finite element analysis has been carried out on intact and broken ellipsoidal inhomogeneities in an infinite body under pure shear. For the intact inhomogeneity, as well known as Eshelby(1957) solution, the stress distribution is uniform in the inhomogeneity and non-uniform in the surrounding matrix. On the other hand, for the broken inhomogeneity, the stress in the region near crack surface is considerably released and the stress distribution becomes more complex. The average stress in the inhomogeneity represents its load carrying capacity, and the difference of average stresses between the intact and broken inhomogeneities indicates the loss of load carrying capacity due to cracking damage. The load carrying capacity of the broken inhomogeneity is expressed in terms of the average stress of the intact inhomogeneity and some coefficients. It is found that the broken inhomogeneity with higher aspect ratio still maintains higher load carrying capacity.

• Journal of Mechanical Science and Technology
• /
• v.15 no.6
• /
• pp.709-719
• /
• 2001

In particle or short-fiber reinforced composites, cracking of reinforcements is a significant damage mode because the cracked reinforcements lose carrying capacity. This paper deals with elastic stress distributions and load carrying capacity of intact and cracked ellipsoidal inhomogeneities. Three dimensional finite element analysis has been carried out on intact and cracked ellipsoidal inhomogeneities in an infinite body under uniaxial tension and pure shear. For the intact inhomogeneity, as well known as Eshelbys solution, the stress distribution is uniform in the inhomogeneity and nonuniform in the surrounding matrix. On the other hand, for the cracked inhomogeneity, the stress in the region near the crack surface is considerably released and the stress distribution becomes more complex. The average stress in the inhomogeneity represents its load carrying capacity, and the difference between the average stresses of the intact and cracked inhomogeneities indicates the loss of load carrying capacity due to cracking damage. The load carrying capacity of the cracked inhomogeneity is expressed in to cracking damage. The load carrying capacity of the cracked inhomogeneity is expressed in terms of the average stress of the intact inhomogeneity and some coefficients. It is found that a cracked inhomogeneity with high aspect ratio still maintains higher load carrying capacity.

• Journal of Korean Society of Transportation
• /
• v.6 no.1
• /
• pp.43-53
• /
• 1988

This study is to find the proper method of estimating urban road traffic capacity. To estimate road traffic capacity, the following methods are chosen ; 1) crossing point of Q-V and S-V, 2) critical velocity and density of Q-V-K model, 3) V-K model with density parameter. The density estimated through S-V relation is 174 veh./km. The methods used in this paper yields more stable values with 2286 veh./h/ in average. The estimated average capacity by three methods are 2272 veh./h. in multilane road. 2411 veh./h in three lane road and 2185 veh./h. in two lane road.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1983.10a
• /
• pp.108-111
• /
• 1983

This paper presents a new method for the optimum capacity assignment in store-and-forward communication networks under a total fixed-capacity constraints. Any two link capacities needed in this method can have the desirable quantites and then other capacities can be obtained from the fixed two link capacities. When the minimum and the maximum capacities that are the quantites of the conventional method are fixed, the total average time delay from the new method is almost the same as that from the conventional method. And when the minimum capacity is fixed, the new method gives smaller average time delay.

• Journal of Korean society of Dental Hygiene
• /
• v.13 no.4
• /
• pp.701-711
• /
• 2013

Objectives : The aim of this study was to evaluate the pH and buffering capacity in some commercial fermented milks in Korea. Methods : The study was carried ouf from June to August, 2012. In 35 liquid type, 79 condense-stirred type and 71 condense-drink type fermented milks, available on the market, pH and buffering capacity were measured. Titration(with NaOH) was used to determine the buffering effect of each fermented milk. They were titrated with 1 M sodium hydroxide, added in 0.1 milliliters increments, until the pH reached about 5.5 and 7.0. Results : The average pH of tested fermented milks was $4.08{\pm}0.27$. The average pH values of fermented milks were $3.64{\pm}0.22$ in liquid type, $4.14{\pm}0.12$ in condense-stirred type, and $4.22{\pm}0.17$ condense-drink type. The average buffering capacity (pH 5.5) of tested fermented milk was $2.40{\pm}0.54$. The average buffering capacity (pH 5.5) of liquid type fermented milk was $2.37{\pm}0.33$, condense-stirred type fermented milk was $2.77{\pm}0.46$ and condense-drink type fermented milk was $2.01{\pm}0.42$. The average buffering capacity (pH 7.0) of tested fermented milks was $4.00{\pm}0.87$. The average buffering capacity (pH 7.0) of liquid type fermented milk was $3.11{\pm}0.36$, condense-stirred type fermented milk was $4.78{\pm}0.55$ and condense-drink type fermented milk was $3.58{\pm}0.59$. Conclusions : The average pH of tested fermented milks in this study was lower than pH 4.5. The type of fermented milks was an important factor for selection of fermented milk which is related with enamel erosion.

• Korean Institute of Interior Design Journal
• /
• v.15 no.6 s.59
• /
• pp.139-149
• /
• 2006

Because of economic growth and the social trend to respect individuality, people's average commodity volume tends to increase. It makes people perceive the importance of storage space. The storage planning without consideration of commodity volume in the apartment can not satisfy the needs of residents. This study is developed focused on the $85m^2$ apartment which is the most representative and general type. The objectives of the study are to investigate the storage-capacity of $85m^2$ apartment offered by 4 construction companies to know the present storage condition, to investigate the average volumes and type of commodities in 30 families located in Seoul and Kyungkido to produce the necessary storage-capacity, and lastly to produce optimal storage-capacity and proportion of optimal storage-capacity considering the volume of the furniture owned by each resident. The results of the study are 1) the storage capacity for commodity volume in $85m^2$ apartment is $19.41m^3$. 2) the optimal storage-capacity which only counts the storage volume of built-in furniture is $17.14m^3$ 3) the proportion of optimal storage-capacity is 9.5% of the house-capacity.