• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.4B
• /
• pp.308-315
• /
• 2002

This paper proposes new probability models for wideband code division multiple access (W-CDMA) signals. The performance of a W-CDMA system is evaluated by calculating the average bit error rate(BER) which is derived from the probability distribution of the W-CDMA receiver output. If a probability model of the receiver output is available, the performance evaluation becomes much simpler and it enables diverse analyses of the system for channel coding and other purposes. In this paper, probability distributions of W-CDMA signals, more specifically those of the receiver output, are represented as Rayleigh and noncentral chi distribution, considering various bandwidths and channel environments. The adequacy of a probability model is verified by chi-square test of 1% significance level. The BER of the system obtained from the simulation results is compared to that obtained from the probability model to demonstrate the usefulness of the proposed models.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.7A
• /
• pp.694-699
• /
• 2007

We consider an optimal antenna weighting scheme for a closed-loop transmit antenna diversity system in Rayleigh fading channels. We derive a closed-form expression for the optimal transmitter weights that minimize the average bit error rate (BER) subject to fixed average and peak transmit power constraints. It is shown that the peak power limitation degrades the average BER performance more significantly as the available average power and/or the number of transmit antennas increase.

• Proceedings of the IEEK Conference
• /
• 2000.11d
• /
• pp.101-104
• /
• 2000

An efficient bit rate distribution technique that distributes available bits for multiple objects based on motion vector magnitude, size of object shape, and coding distortion is presented. This coding concept using the three parameters was exploited in MPEG-4 multiple object coding. But the scheme is likely to produce poor results such as allocating more bits to less important objects and degrading picture quality, due to the lack of analysis and research in view of human visual aspect. In this paper importance of each object is represented by the three parameters and visually analyzed. Target bits are distributed according to coding distortion using the pre-assigned shape and motion information.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.11
• /
• pp.962-966
• /
• 2001

The major problem at a branch point for point-to-multipoint available bit rate(ABR) services in asynchronous transfer mode (ATM) networks is how to consolidate backward resource management(BRM) cells from each branch for a multicast connection. In this paper, we propose an efficient feedback consolidation algorithm based on an adaptive dynamic threshold(ADT) to eliminate the consolidation noise and the reduce the consolidation delay. The main idea of the ADT algorithm lies in that each branch point estimates the ABR traffic condition of the network through the virtual queue estimation and the transmission threshold of the queue level in branch points is adaptively controlled according to the estimation. Simulation results show that the proposed ADT algorithm can achieve a faster response in congestion status and a higher link utilization compared with the previous works.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.5
• /
• pp.1085-1093
• /
• 2000

An efficient bit rate distribution technique that distributes available bits for multiple objects based on motion vector magnitude, size of object shape, and coding distortion is presented. This coding concept using the three parameters was exploited in MPEG-4 multiple object coding. But the scheme is likely to produce poor results such as allocating more bits to less important objects and degrading picture quality, due to the lack of analysis and research in view of human visual aspect. In this paper importance of each object is represented by the three parameters and visually analyzed. Target bits are distributed according to coding distortion using the pre-assigned shape and motion information.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.1
• /
• pp.97-101
• /
• 2013

There is a growing need for optical communication systems that convert large volumes of data to optical signals and that accommodate and transmit the signals across long distances. Digital optical communication consists of a master unit (MU) and a slave unit (SU). The MU transmits data to SU using digital optical signals. However, digital optical units that are commercially available or are under development transmit data using two's complement representation. At low input levels, a large number of SSOs (simultaneous switching outputs) are required because of the high rate of bit switching in two's complement, which thereby increases the power noise. This problem reduces the overall system capability because a DSP (digital signal processor) chip (FPGA, CPLD, etc.) cannot be used efficiently and power noise increases. This paper proposes a change from two's complement to a more efficient method that produces less SSO noise and can be applied to existing digital optical units.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.4
• /
• pp.88-96
• /
• 1994

In this paper, we propose a subband pyramid image coding scheme that uses ECVQ (ntropy Constrained Vector Quantizer). In subband pyramid image coding, each subband can be encoded with a coder matched to the statistics of that particular subband, and available versions of the original image at different resolution are easily obtained. ECVQ, aiming at the minimization of the distortion for a fixed entropy of the quantizer output, is well combined with the subband pyramid image coding which yields high compression ratio and good image quality. The optimum bit allocation to each subbands corresponds to the points where the individual distortion rate curves are of particular slope, weighted to the number of samples in that subband, in designing ECVQ.

• Journal of Internet Computing and Services
• /
• v.2 no.3
• /
• pp.27-36
• /
• 2001

Recently much attention has been paid for interference mitigation technique for the COMA system, since more capacity is available with same bandwidth. In this paper, we introduces a novel adaptive interference suppression techniques for the CDMA system with narrow band interference. The proposed interference rejection scheme employs the adaptive linear prediction techniques in the subband. In each subband, we can more easily find and cancel the narrow band signal as compared to the full band. Thus, the proposed interference rejection can be classified as another time-frequency techniques for the narrow band interference rejection(10). Computer simulation is conducted for the 3-G COMA system with IF band sampling techniques, yielding better interference rejection and bit error rate performance as compared to conventional one. Also, optimum filter is analyzed and from the analysis, it can be shown the subband prediction techniques can suppress narrow band interference more efficiently.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1998.10a
• /
• pp.105-110
• /
• 1998

본 논문에서는 퍼지 로직을 이용하여 ATM 망의 ABR(Available Bit Rate) 트래픽 제어를 위한 효과적이고, 안정적인 피드백 제어 알고리즘을 제안한다. 기존 알고리즘들의 단점을 보완하면서, 망 내의 상황이 변하더라도 자가 학습 기능(self-learning capability)을 이용하여 파라미터 값들을 상황에 맞게 변화시키는 퍼지 로직을 이용한 새로운 제어알고리즘을 제안한다. 제안된 알고리즘은 Projection algorithm을 이용하여, 과거의 데이터로부터 다음 순간의 ABR 버퍼의 크기를 예측하며 퍼지 제어기의 출력 함수 파라미터들은 성능함수를 최소화하도록 학습된다. 제안된 알고리즘은 안정성(stability)이 보장되며, Upstream bottleneck 환경등의 특수하고, 제한된 상태에서도, 요구되는 QoS와 max-min fairness가 만족되고, 링트 효율을 극대화 할 수 있음을 시뮬레이션을 통하여 입증한다.

• Annual Conference of KIPS
• /
• 2019.05a
• /
• pp.86-88
• /
• 2019

In a complex geographical environment, communication quality of communication equipment is being seriously challenged. Secondary Users(SUs) must make the best possible use the idle spectrums that Primary Users(PUs) do not use and change spectrum frequently. Using the relevance vector machine(RVM) to establish a signal noise Ratio(SNR) Model for interference information and bit error rate(BER). Through the model and real-time interference information, the minimum channel SNR meeting the BER requirements of communication equipment can be predicted, and we can also calculate the minimum transmitted power. According to the simulation results, this method has better performance for selecting available channel and restraining interference.