• 동력기계공학회지
• /
• 제17권2호
• /
• pp.121-127
• /
• 2013

The air spring is used widely because of the easy change of spring constant, and, a superior vibration and shock insulation performance. Among the apparatus using the merits of that, the air spring connected an auxiliary chamber has been developed and used as a component of suspension system for an automobile and a railroad car. The purpose of this study is to suggest a design method reflecting heat transfer effect for an air spring system connected auxiliary chamber. In order to do so, this study investigates change of reaction force along with variations in heat transfer coefficient, and, analyzes an effectiveness of a heat transfer characteristics of an auxiliary chamber for external force attenuation characteristics and impedance characteristics of an air spring connected an auxiliary chamber.

• 한국분무공학회지
• /
• 제2권2호
• /
• pp.43-50
• /
• 1997

The purpose of this investigation is to carry out, the influence factor on the fuel spray characteristics for improve the engine combustion performance and exhaust omission in direct injection type diesel engine. The fuel properties, fuel spray structure and the shape or the piston surface of diesel engine play an important role of engine combustion process and exhaust emission. In order to obtain the effect of using auxiliary chamber and emulsified fuel on the fuel spray characteristics the experiment un conduct with single cylinder direct injection type diesel engine to examine the engine performance and gas emission. The results of this investigation showed that the increase auxiliary chamber volume and emulsified fuel give an effect on the fuel spray characteristics by reduced the concentration of nitric oxide emission in the combustion chamber. Also it can improve the combustion characteristics such as cylinder pressure, rate of pressure rise and rate of heat release.

• 드라이브 ㆍ 컨트롤
• /
• 제10권2호
• /
• pp.1-6
• /
• 2013

This study describes a method which can attenuate reaction force effectively for an air spring system composed of an air spring and auxiliary chamber. For the analysis, the nonlinear governing equation of the air spring system is derived. For a performance improvement of the system, change of the heat transfer effect and the mass flow rates is included in the analysis of the air spring system. The simulation study is presented to show the reaction force is changed by variations in heat transfer characteristics and the air spring system of isothermal process has the best performance. As a result, to improve attenuation characteristics of reaction force, a process in the air spring system should be maintained near isothermal process.

• 한국전자파학회논문지
• /
• 제26권3호
• /
• pp.248-256
• /
• 2015

본 논문에서는 4G 이동 통신을 위한 메탈 폰용 보조 슬롯 하이브리드 MIMO 안테나를 설계하고, 이를 제작하였다. 보조 슬롯은 단말기 후면 메탈 커버에 슬롯을 내어 LTE class 40 대역을 담당하게 하였다. 보조 슬롯은 모노폴 안테나와 함께 하이브리드로 동작한다. 제안 안테나는 LTE class 13/ LTE class 14/ CDMA/ GSM/ DCS/ PCS/ W-CDMA/ LTE class 40 대역에서 VSWR 3:1 이하의 조건을 만족하였다. MIMO 동작을 위한 ECC(Envelope Correlation Coefficient)는 전 대역에서 0.2 이하의 특성을 보였다. MTG 무반사실 측정한 안테나의 평균 이득은 -5.57~-1.45 dBi이고, 효율은 27.75~71.6%로 측정되었다.

• 한국전자파학회논문지
• /
• 제27권4호
• /
• pp.395-398
• /
• 2016

본 논문에서는 이동 통신 메탈 폰 단말기용 보조 문자슬롯 하이브리드 MIMO 안테나를 설계하고, 이를 제작하였다. 보조 문자슬롯은 단말기 후면 메탈 커버에 슬롯을 내어 LTE class 40대역을 담당하게 하였다. 문자 슬롯으로 2종류의 문자를 설계하였으며, 주 안테나인 모노폴+IFA 하이브리드와 함께 동작하도록 하였다. 안테나는 LTE class 13 / LTE class 14 / CDMA / GSM / DCS / PCS / W-CDMA / LTE class 40 대역에서 VSWR 3: 1 이하의 조건을 만족하였다. 무반사실에서 측정한 안테나의 평균이득은 전체 대역에서 -5.57~-1.45 dBi이고, 효율은 27.75~71.6 %로 측정되었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.96-102
• /
• 2001

High intensity vibro-acoustic testing is the appropriate method for flight qualification testing of space flight vehicle which must ensure the acoustic environment of launch. Growing demand for satellites and launch vehicles in korea has resulted in a recent increase in the demand for high intensity vibro-acoustic test facility. The test facility is designed to provide an acoustic environment of 152 ㏈( re 20 ${\mu}$Pa) overall sound pressure level over the band width of 30 Hz to 10,000 Hz in the reverberant chamber. The reverberant chamber has a volume of 1,000 ㎥ with interior dimensions of 8.7m${\times}$l0m${\times}$12m, which can accommodate not only satellites but also launch vehicle payload fairing. Korea Aerospace Research Institute and Korean industries have been carrying out the development of the reverberant chamber and auxiliary devices, such as automatic control system, monitoring/safety device, and jet nozzle, etc. This paper presents the detailed description of High Intensity Acoustic Chamber of KARI, which will be the first and unique testing facility in Korea.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제36회 춘계학술대회논문집
• /
• pp.109-112
• /
• 2011

한국형발사체 추진기관 개발을 위한 연소기 연소시험설비와 터보펌프 실매질 시험설비의 배치 및 설계에 대해 간략히 기술하였다. 연소기 연소시험설비 및 터보펌프 실매질 시험설비에서 75톤급 액체로켓엔진의 부품인 연소기 및 터보펌프의 개발 및 인증시험을 수행할 예정이다. 연소기 및 터보펌프 시험설비의 유공압 설비, 제어계측 시스템, 시험 스탠드 그리고 부대설비에 대한 상세설계를 완료하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 C
• /
• pp.1054-1056
• /
• 1999

It is necessary to install the arc generation facility to obtain the important technology for the design of breakers and switches, and the improvement of their performance and reliability. With this facility it is possible to study the characteristics of Arc in air/gas/vacuum insulation environment. The arc generation facility briefly consists of capacitor bank which can charge enormous energy, an air-core reactor, and several measurement equipments. This facility can simulates the arc phenomena in breakers and switches by means of generating high currents. In order to the protect electrode damage during the arcing time in arc extinguishing chamber, we installed auxiliary current source in addition to main capacitor bank, This auxiliary current source produces relatively small arc between electrodes before high current generation by main capacitor bank. Therefore it is possible to observe and measure the arcing phenomenon without damage of electrodes.

• 대한기계학회논문집
• /
• 제7권3호
• /
• pp.257-262
• /
• 1983

The performance of a direct-injection type diesel engine often depends on the shape of combustion chamber, strength of swirl or squish, the number of nozzle holes, etc. This is of course because the process of combustion in the cylinder was affected by the mixture formation process. In this paper, the relation betweeen the flame progress and the performance of engine was clarified by changing variously the combustion process in cylinder with a special method, and thus the measures for improving the combustion were indirectly examined. Namely it was investigated what effect the flame progress in cylinder, which was varied with the locality of the lean premixture injected by the auxiliary injection method using an auxiliary injection nozzle in advance at the place where main spray was injected later, has on the engine output, the exhaust smoke density and the NO concentration in exhaust gas.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.643-646
• /
• 2002

Sealing of two glass plates composing of PDP panel was done in a vacuum chamber by using an auxiliary heating line(AHL). In order to improve the uniformity of sealing temperature and reduce the panel temperature during sealing, the AHL was introduced by a screen printing method inside a frit glass and used as a part of heating source for the frit melting. By using the AHL technology and the specially prepared frit glass, we have successfully sealed a PDP test panel without bubbles and any leak through the frit glass.