• 제어로봇시스템학회논문지
• /
• 제22권8호
• /
• pp.633-642
• /
• 2016

It is important for advanced active safety systems and autonomous driving cars to get the accurate estimates of the nearby vehicles in order to increase their safety and performance. This paper proposes a sensor fusion method for radar and vision sensors to accurately estimate the state of the preceding vehicles. In particular, we performed a study on compensating for the lateral state error on automotive radar sensors by using a vision sensor. The proposed method is based on the Interactive Multiple Model(IMM) algorithm, which stochastically integrates the multiple Kalman Filters with the multiple models depending on lateral-compensation mode and radar-single sensor mode. In addition, a Probabilistic Data Association Filter(PDAF) is utilized as a data association method to improve the reliability of the estimates under a cluttered radar environment. A two-step correction method is used in the Kalman filter, which efficiently associates both the radar and vision measurements into single state estimates. Finally, the proposed method is validated through off-line simulations using measurements obtained from a field test in an actual road environment.

• 한국멀티미디어학회논문지
• /
• 제25권7호
• /
• pp.912-921
• /
• 2022

Autonomous vehicles equipped with cameras, such as robots, fork lifts, or cars, can be found frequently in industry sites or usual life. Those cameras show planar motion because the vehicles usually move on a plane. Sometimes the cameras in fork lifts moves vertically. The cameras under planar and vertical motion provides useful properties for horizontal or vertical lines that can be found easily and frequently in our daily life. In this paper, some useful back-projection properties are suggested, which can be applied to horizontal or vertical line images captured by a camera under planar and vertical motion. The line images are back-projected onto a virtual plane that is parallel to the planar motion plane and has the same orientation at the camera coordinate system regardless of camera motion. The back-projected lines on the virtual plane provide useful information for the world lines corresponding to the back-projected lines, such as line direction, angle between two horizontal lines, length ratio of two horizontal lines, and vertical line direction. Through experiments with simple plane polygons, we found that the back-projection properties were useful for estimating correctly the direction and the angle for horizontal and vertical lines.

• 자동차안전학회지
• /
• 제14권3호
• /
• pp.23-29
• /
• 2022

Among the various functions of ADAS (Advanced Driver Assistance System), the most important and representative function to the safety of vehicle passengers is AEB (Autonomous Emergency Braking system). In South Korea, laws are in progress from 2022 for making it mandatory for passenger vehicles to be installed. And as AEB-equipped vehicles continues to increase in the future, the demand for accident analysis related to the AEB function is expected to increase in the future. In order to find out the operating limits of AEB, it is necessary to consider the situations exceeding the standards covered by EuroNCAP. Therefore we have performed four experiments in this study, including situations encountered in real-word traffic conditions, i.e., an oblique stop of Global Vehicle Target (GVT) and ADAS sensor failures. These experimental results are expected to be of great help in accurate and reliable accident analysis by considering them when analyzing traffic accidents for ADAS vehicles.

• 센서학회지
• /
• 제33권5호
• /
• pp.391-398
• /
• 2024

Accurate positioning is essential for unmanned underwater vehicle (UUV) operations, particularly for long-term survey missions. To reduce the inherent positioning errors from the inertial navigation systems of UUVs, or dead reckoning, underwater terrain observations from sonar sensors are typically exploited. Within the framework of pose-graph optimization, we can generate submaps of the seafloor and use them to add loop-closure constraints to the pose graph by determining the best match between the submaps. However, this approach results in error accumulation in long-term operations because the quality of local submaps depends on the dead reckoning. Hence, we can adopt external acoustic positioning systems, such as an ultrashort baseline (USBL), to add global constraints to the existing pose graph. We assume that the acoustic transponder is installed on a UUV and that the acoustic transceiver is equipped in an unmanned surface vehicle trailing the UUV to maintain an acoustic connection between the vehicles. We simulate the terrain and USBL measurements as well as evaluate the performance of the UUV's pose estimation via online pose-graph optimization.

• 제어로봇시스템학회논문지
• /
• 제21권2호
• /
• pp.115-120
• /
• 2015

Recently, in automotive technology area, intelligent safety systems have been actively accomplished for drivers, passengers, and pedestrians. Also, many researches are focused on development of autonomous vehicles. This paper propose the application of LiDAR sensors, which takes major role in perceiving environment, terrain classification, obstacle data clustering method, and local map building for autonomous driving. Finally, based on these results, planning for lane change path that vehicle tracking possible were created and the reliability of path generation were experimented.

• Journal of Electrical Engineering and Technology
• /
• 제12권2호
• /
• pp.937-943
• /
• 2017

To design an automatic steering controller with high performance for autonomous vehicle, it is necessary to have a precise model of the lateral dynamics with respect to the steering command input. This paper presents an empirical modeling of the steering system for an autonomous vehicle. The steering system here is represented by three individual transfer function models: a steering wheel actuator model from the steering command input to the steering angle of the shaft, a dynamic model between the steering angle and the yaw rate of the vehicle, and a dynamic model between the steering command and the lateral deviation of vehicle. These models are identified using frequency response data. Experiments were performed using a real vehicle. It is shown that the resulting identified models have been well fitted to the experimental data.

• 대한임베디드공학회논문지
• /
• 제7권5호
• /
• pp.247-253
• /
• 2012

This paper presents sensor network based autonomous vehicle system using a proposed image processing algorithm. The proposed image processing algorithm consists of pre-processing and five-stage image processing: coordinate calculation, driving area decision, line segment calculation, steeling decision, and acceleration decision. We evaluate the performance of the proposed algorithm on both straight road and curved road. Experimental results indicate that the proposed algorithm works well for autonomous vehicles. However, control accuracy of the proposed algorithm decreases as speed is increasing.

• 한국전자통신학회논문지
• /
• 제8권2호
• /
• pp.329-337
• /
• 2013

본 논문에서는 자율 주행 자동차의 연구 방향을 결정하기 위한 기관별 개인별 논문 분석을 통한 계량정보 분석을 검토한다. 기관별 개인별 논문 수 분석, 수준 분석, 국제협력연구 네트워크 분석, 핵심 기관과 개인의 Q-L분포를 이용하여 자율 주행 자동차의 연구 동향을 확인한다.

• 한국전자통신학회논문지
• /
• 제8권2호
• /
• pp.321-328
• /
• 2013

본 논문에서는 자율 주행 자동차의 연구 방향을 결정하기 위한 국가별 논문 분석을 통한 계량정보 분석을 수행한다. 이를 위해 국가별 수준 분석, 국제협력연구 네트워크 분석을 통하여 자율 주행 자동차의 연구 동향을 확인한다.

• 대한임베디드공학회논문지
• /
• 제8권4호
• /
• pp.205-212
• /
• 2013

In recent, the demand of Unmanned Aerial Vehicles (UAVs) that can autonomous navigation and remote control has been increased in military, civil and commercial field. Particularly, existing researches focused on autonomous navigation method based on vanish point and remote control method based on event processing in indoor environments. However, the existing methods have some problems. For instance, a detected vanish point in intersection point has too much detection errors. In addition, the delay is increased in existing remote control system for processing images in real time. Thus, we propose improved vanish point algorithm by removing detection errors in intersection point. We also develop a remote control system with android platform by separating flying control and image process. Finally, we compare the proposed methods with existing methods to show the improvement of our approaches.