• 로봇학회논문지
• /
• 제5권2호
• /
• pp.120-126
• /
• 2010

This paper presents to study the path tracking method of AGV(autonomous guided vehicle) which has a laser guidance system. An existing automatic guided vehicles(AGVs) which were able to drive on wired line only had a automatic guidance system. However, the automatic guidance systems that those used had the high cost of installation and maintenance, and the difficulty of system change according to variation of working environment. To solve such problems, we make the laser guidance system which is consisted of a laser navigation and gyro, encoder. That is robust against noise, and flexible according to working environment through sensor fusion. The laser guidance system can do a perfect autonomous driving. However, the commercialization of perfect autonomous driving system is difficult, because the perfect autonomous driving system must recognize the whole environment of working space. Hence, this paper studied the path tracking of AGV using laser guidance system without wired line. The path tracking method is consisted of virtual path generation method and driving control method. To experiment, we use the fork-type AGV which is made by ourselves, and do a path tracking experiments repeatedly on same experimental environment. In result, we verified that proposed system is efficient and stable for actual fork-type AGV.

• Journal of Biosystems Engineering
• /
• 제31권6호
• /
• pp.489-499
• /
• 2006

Since the application of chemicals in confined spaces under the canopy of an orchard is hazardous work, it is needed to develop an autonomous guidance system for an orchard sprayer. The autonomous guidance system developed in this research could steer the vehicle by tracking an overhead guidance rail, which was installed on an existing frame structure. The autonomous guidance system consisted of an 80196 kc microprocessor, an inclinometer, two interface circuits of actuators for steering and ground speed control, and a fuzzy control algorithm. In addition, overhead guidance rails for both straight and curved paths were devised, and a trolley was designed to move smoothly along the overhead guidance rails. Evaluation tests showed that the experimental vehicle could travel along the desired path at a ground speed of 30 $\sim$ 50 cm/s with a RMS error of 5 cm and maximum deviation of less than 12 cm. Even when the vehicle started with an initial offset or a deflected heading angle, it could move quickly to track the desired path after traveling 2 $\sim$ 3 m. The vehicle could also complete turns with a curvature of 1 m. However, at a ground speed of 50 cm/s, the vehicle tended to over-steer, resulting in a zigzag motion along the straight path, and tended to turn outward from the projected line of the guidance rail.

• 한국지능시스템학회논문지
• /
• 제14권2호
• /
• pp.239-246
• /
• 2004

In this paper, we develop and implement a high integrity GNC(Guidance, Navigation, and Control) system, based on the combined use of the Global Positioning System (GPS) and an Inertial Measurement Unit (IMU), for autonomous land vehicle applications. This paper highlights guidance for the predetermined trajectory and navigation with detection of possible faults during the fusion process in order to enhance the integrity of the navigation loop. The implementation of the GNC system to the autonomous land vehicle presented with fault detection methodology considers high frequency faults from the GPS receiver caused by shadowing and multipath error The implementation, based on a low-cost, strapdown INS aided by standard GPS technology, is described. The results of the field test in the urban environment are presented and showed effectiveness of the GNC system.

• 한국지능시스템학회논문지
• /
• 제17권2호
• /
• pp.214-219
• /
• 2007

본 논문은 자율주행차량과 로봇의 안내를 위한 새로운 자계위치인식방법을 제안한다. 차량 및 로봇이 자율주행을 하기 위해서는 이동경로상의 현재 위치를 인식하는 것이 기본적으로 요구된다. 자계기반 자율주행차량과 로봇은 자성체로부허 발생되는 자계를 계측하여 위치정보를 검출한다. 이러한 자계위치인식시스템에서 지구자계는 기본적인 왜란으로 작용한다. 본 논문에서는 지구자계의 영향을 제거하기 위해 다수의 1축 자계센서 열을 구성하였으며, 자계센서 출력의 선형동작영역을 이용하여 정밀한 위치인식시스템을 개발하였다. 제안하는 방법이 자율주행차랑과 로봇의 안내를 위해 사용 가능함을 실험을 통하여 검증하였다.

• Agricultural and Biosystems Engineering
• /
• 제2권2호
• /
• pp.50-58
• /
• 2001

Chemical application is very hazardous in confined spaces under the canopy ceiling in Korean vineyard. For a small orchard sprayer adaptable to such a working condition, a low-cost autonomous steering control system was developed using two ultrasonic sensors, two electrically-operated cylinders and 80196kc microprocessor. A distance ranging system timed the round-trip for each ultrasonic wave to travel against parallel targets, placed every 1.5m spacing along both sides of a desired path. A steering control algorithm of the autonomous operation began with ranging left and right targets and the heading was decided using difference between the distances. Electrically-operated cylinders actuated steering clutches to guide the sprayer. Evaluation tests showed that the orchard sprayer could travel within RMS value of 5cm along the desired path. Ground speed did not affect the performance of the autonomous guidance system at the speed ranges of 0.29~0.52m/sec.

• International Journal of Aeronautical and Space Sciences
• /
• 제6권2호
• /
• pp.64-75
• /
• 2005

The Stratospheric Airship Platform (SAP) has a capability of performing the autonomous and guidance flight to satisfy given missions. To be used as the High Altitude Platforms (HAPs), the capabilities of controlling platform's accurate position and keeping the station point are the most important features. Under this circumstances Autonomous Flight Control System (AFCS) is a critical system and plays a key role in achieving the given requirements and succeeding in missions. In this paper, the design and analysis results of the AFCS algorithms and controller are presented. The brief summary of the AFCS hardware structure is also explained. The autopilot controller and guidance logics were designed based on the linear dynamics of the unmanned airship platform and the full nonlinear dynamics was considered to evaluate and verify their performances.

• International Journal of Ocean System Engineering
• /
• 제2권3호
• /
• pp.139-150
• /
• 2012

This paper presents an improved guidance algorithm for autonomous underwater vehicles (AUV) in 3D space for generating smoother vehicle turn during the course change at the way-points. The way-point guidance by the line-of-sight (LOS) method has been modified for correcting the reference angles to achieve minimal calculation and smoother transition at the way-points. The algorithm has two phases in which the first phase brings the vehicle to converge to a distance threshold point on the line segment connecting the first two way-points and the next phase generates an angular path with smoother transition at the way-points. Then the desired angles are calculated from the reference and correction angles. The path points are regularly parameterized in the spherical coordinates and mapped to the Cartesian coordinates. The proposed algorithm is found to be simple and can be used for real time implementation. The details of the algorithm and simulation results are presented.

• 한국정보통신학회논문지
• /
• 제24권11호
• /
• pp.1417-1423
• /
• 2020

본 논문에서는 수중에서 운동하는 무인잠수정의 경로점 유도법칙을 제안한다. 시선각 유도법칙과 수선경로 오차를 줄여가는 경로추종 유도법칙을 조합하여 효과적인 경로점 유도법칙을 설계하였고, 수선경로 오차의 거리에 따라 제어이득을 변화시켜 시스템의 안정성을 증가시켰다. 또한, 관성항법장치와 도플러속도계를 이용한 복합항법 시스템의 성능을 확인할 수 있는 HILS를 구성하였다. 같은 경로점 및 목표점을 입력 후 HILS 수행결과와 실해역 주행시험 결과를 비교하여, 제안한 유도법칙 및 HILS가 올바르게 구성되어 있음을 확인하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1460-1463
• /
• 2005

In this paper, analysis of magnetic marker for autonomous vehicle guidance system using 3-axis magnetic sensor propose. Position sensing is an important an estimation system of vehicle position and orientation on magnetic lane, which is a parameter of the steering controller for automated lane following is described. To verify that the magnetic dipole model could be applied to a magnetic unit paved in roadway, the analysis of the data 3-axis magnetic field measured experimentally.

• 한국전자통신학회논문지
• /
• 제14권1호
• /
• pp.213-218
• /
• 2019

본 논문에서는 이동 로봇이 호텔과 같은 실내에서 길 안내 및 짐을 운반해줄 수 있는 자율주행이 가능한 안내 시스템을 연구하였다. 일반적인 자율 주행 안내시스템에 사용되는 이동 로봇의 경우 정확도 향상을 위해 시스템에 다량의 센서가 추가되어 비용의 문제가 발생된다. 따라서 센서의 수를 줄이며 정확도와 인식률을 높이기 위해 비용이 비싸지 않은 소형 MCU중 하나인 라즈베리 파이 3를 이용하여 자율 주행 안내 시스템을 구현하였다.