• 제어로봇시스템학회논문지
• /
• 제17권5호
• /
• pp.451-459
• /
• 2011

Fundamentally, there are 5 systems are needed for autonomous navigation of unmanned ground vehicle: Localization, environment perception, path planning, motion planning and vehicle control. Path planning and motion planning are accomplished based on result of the environment perception process. Thus, high reliability of localization and the environment perception will be a criterion that makes a judgment overall autonomous navigation. In this paper, via map matching using vehicle dynamic model and LIDAR sensors, replace high price localization system to new one, and have researched an algorithm that lead to robust autonomous navigation. Finally, all results are verified via actual unmanned ground vehicle tests.

• 자동차안전학회지
• /
• 제13권4호
• /
• pp.123-128
• /
• 2021

This paper present box feature estimation from LiDAR point cluster using maximum likelihood Method. Previous LiDAR tracking method for autonomous driving shows high accuracy about velocity and heading of point cluster. However, Assuming the average position of a point cluster as the vehicle position has a lower accuracy than ground truth. Therefore, the box feature estimation algorithm to improve position accuracy of autonomous driving perception consists of two procedures. Firstly, proposed algorithm calculates vehicle candidate position based on relative position of point cluster. Secondly, to reflect the features of the point cluster in estimation, the likelihood of the particle scattered around the candidate position is used. The proposed estimation method has been implemented in robot operating system (ROS) environment, and investigated via simulation and actual vehicle test. The test result show that proposed cluster position estimation enhances perception and path planning performance in autonomous driving.

• 자동차안전학회지
• /
• 제14권4호
• /
• pp.35-42
• /
• 2022

This paper presents a stochastic model predictive control (SMPC) for stop maneuver of autonomous vehicles considering perception uncertainty of stopped vehicle. The vehicle longitudinal motion should achieve both driving comfortability and safety. The comfortable stop maneuver can be performed by mimicking acceleration profile of human driving pattern. In order to implement human-like stop motion, we propose a reference safe inter-distance and velocity model for the longitudinal control system. The SMPC is used to track the reference model which contains the position uncertainty of preceding vehicle as a chance constraint. We conduct simulation studies of deceleration scenarios against stopped vehicle in urban environment. The test results show that proposed SMPC can execute comfortable stop maneuver and guarantee safety simultaneously.

• 자동차안전학회지
• /
• 제14권1호
• /
• pp.20-25
• /
• 2022

This paper presents a development of simulation environment for validation of autonomous driving (AD) algorithm based on Robot Operating System (ROS). ROS is one of the commonly-used frameworks utilized to control autonomous vehicles. For the evaluation of AD algorithm, a 3D autonomous driving simulator has been developed based on LGSVL. Two additional sensors are implemented in the simulation vehicle. First, Lidar sensor is mounted on the ego vehicle for real-time driving environment perception. Second, GPS sensor is equipped to estimate ego vehicle's position. With the vehicle sensor configuration in the simulation, the AD algorithm can predict the local environment and determine control commands with motion planning. The simulation environment has been evaluated with lane changing and keeping scenarios. The simulation results show that the proposed 3D simulator can successfully imitate the operation of a real-world vehicle.

• 한국ITS학회 논문지
• /
• 제22권3호
• /
• pp.175-189
• /
• 2023

자율주행 차량의 무결성과 내결함성을 보장하기 위한 환경 인식 센서의 결함 감지 및 격리(FDI) 알고리즘이 중요한 연구 주제로 다루어지고 있다. 본 논문에서는 자율주행 차량의 안전성 보장을 위한 레이다, 카메라, 라이다로 구성된 다중 인지 시스템 결함 검출 알고리즘을 제시하였다. 제안된 결함 감지 알고리즘은 FIR(Finite Impulse Response) 필터 추정치에 기반한 레지듀얼의 생성 및 분석으로 고장의 감지 및 격리를 수행한다. 알고리즘의 성능 검증을 위해 가상환경에서의 수치 시뮬레이션을 수행하여 알고리즘을 기존의 칼만 필터 기반 알고리즘과 비교 및 고찰하였다. 결과적으로 제안된 알고리즘은 인지 시스템의 강건성을 확보할 수 있음을 검증하였다. 본 연구는 자율주행 차량의 안전성과 신뢰성을 확보하기 위한 필수적인 연구로, 자율주행 차량의 환경 인지 센서의 무결성을 향상 시킬 것으로 판단된다.

• 한국자동차공학회논문집
• /
• 제19권4호
• /
• pp.146-154
• /
• 2011

This article describes the Autonomous Vehicle #1 (A1), which won the 2010 Autonomous Vehicle Competition (AVC) organized by Hyundai Kia automotive group. The A1 was developed for high speed and stable driving without human intervention. The autonomous system of A1 was developed based on in-vehicle networks, electronic control units, and embedded software. Novel environment perception and navigation algorithm were evaluated and validated through the AVC. In this paper, we presented the system and software architecture of A1.

• 한국지능시스템학회논문지
• /
• 제23권1호
• /
• pp.35-45
• /
• 2013

자동차의 자율주행기능 실현을 위해서는 기존의 지능형자동차 인식시스템 보다 강인하고 우수한 성능의 주행환경 인식시스템이 요구된다. 특히, 카메라와 레이저레이더 센서는 물체의 특징, 거리 등의 정보를 제공하는 대표적인 주행환경인식 센서로, 이를 이용한 단일센서기반 인식시스템 연구가 활발히 이루어지고 있다. 일반적으로 레이저레이더 센서의 거리정보는 도로의 구조, 차량, 보행자 등의 인식을 위하여 많이 사용되며, 카메라의 영상정보는 차선, 횡단보도, 표지판 등의 주행환경 인지에 사용된다. 하지만, 단일센서기반 인식시스템은 센서의 특성 및 주행환경에 의한 오검출 또는 미검출 발생률이 높기 때문에 자율주행기능 구현에 적합하지 않다. 따라서 단일센서기반의 인식시스템의 한계를 극복하기 위하여 카메라, 레이저레이더, GPS 등을 이용한 정보융합 인식시스템 개발이 필수적이다. 이 연구에서는 영상 및 레이저레이더의 정보융합을 통해 강인한 차선인식, 횡단보도 인식 등을 수행하는 자율주행자동차의 주행환경 인식기술을 개발하였다. 이 연구를 통해 개발된 주행환경 인식기술은 자율주행자동차에 적용되어 다양한 주행시험을 통해 신뢰성 및 안정성이 검증되었다.

• 자동차안전학회지
• /
• 제14권2호
• /
• pp.20-25
• /
• 2022

This paper represents an adaptive Region of Interest (ROI) decision for real-time performance in an autonomous driving perception module. Since the whole automated driving system consists of numerous modules and subdivisions of module occur, it is necessary to consider the characteristics, complexity, and limitations of each module. Furthermore, Light Detection And Ranging (Lidar) sensors require a considerable amount of time. In view of these limitations, division of submodule is inevitable to represent high real-time performance for stable system. This paper proposes ROI to reduce the number of data respect to computation time. ROI is set by a road's design speed and the corresponding ROI is applied differently to each vehicle considering its speed. The simulation model is constructed by ROS, and overall data analysis is conducted by Matlab. The algorithm is validated using real-time driving data in urban environment, and the result shows that ROI provides low computational costs.

• Journal of Positioning, Navigation, and Timing
• /
• 제11권4호
• /
• pp.351-360
• /
• 2022

Autonomous vehicles require precise knowledge of their position, velocity and orientation in all weather and traffic conditions in any time. And, these information is effectively used for path planning, perception, and control that are key factors for safety of vehicle driving. For this purpose, a high precision GNSS technology is widely adopted in autonomous vehicles as a core localization and navigation method. However, due to the lack of infrastructure as well as cost issue regarding GNSS correction data communication, only a few high precision GNSS technology will be available for future commercial autonomous vehicles. Recently, a high precision GNSS sensor that is based on a Broadcast-RTK system to dramatically reduce network maintenance cost by utilizing the existing broadcasting network is released. In this paper, we present the performance test result of the broadcast-RTK-based commercial high precision GNSS receiver to test the feasibility of the system for autonomous driving in Korea. Massive measurement campaigns covering of Korea region were performed, and the obtained measurements were analyzed in terms of ambiguity fixing rate, integer ambiguity loss recovery, time to retry ambiguity fixing, average correction information update rate as well as accuracy in comparison to other high precision systems.

• 자동차안전학회지
• /
• 제13권4호
• /
• pp.60-65
• /
• 2021

The event data recorders (EDR) have been used as a device to help understand traffic accidents. With the recent development of autonomous vehicle (AV), it has become important to prepare the new EDR for AV. Therefore, the purpose of this study is to propose the direction of EDR-AV recording. First of all, the recent EDR data elements and the data elements of AV under discussion at UNECE WP29 EDR/DSSAD (Data Storage System for Automated Driving) were analyzed. The consumer complaint database in Motor Vehicle Recall Center in Korea was analyzed in order to utilize cases of domestic traffic accidents related to advanced driver assistance systems (ADAS). Consequently, problems with existing EDR were identified through unclear accident cases related to ADAS. In the future, it was proposed to record images in which the ADAS perception systems recognize the surroundings of the accident site as an EDR-AV recording item.