• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.3
• /
• pp.100-115
• /
• 2020

The manufacturing-oriented mobility system is being reorganized around the future mobility system represented by electrification, sharing, and autonomy, driven by the social demand for sustainable development. Changes in future mobility systems are expected to accelerate thanks to advances in IT technology. To this end, this study conducted an expert survey (N=23) to predict the direction of changes in the future mobility system. Through the survey, 'mobility sharing' was selected as a key factor in the future mobility system among four future mobility. In addition, 'safety' was selected as the most important service factors in future mobility system among eight future mobility service factors. We hope that the results of this study will be used as basic information to design policies and service directions of preparation for the future mobility system.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1995.04a
• /
• pp.208-215
• /
• 1995

Numerous solution methods for scheduling problems such as part dispatching problem, operation sequence problem have been suggested as a means to be embedded in hierarchical or centralized shop floor control. Under the preceding control philosophies, however, response to changes in the shop floor status is quite slow and timely decision is sometimes impossible. Moreover, the control software becomes too large and it is almost impossible to modify the control software when the configuration of the shop floor changes. In agile manufacturing which emerged recently to cope with quick response and easy modifiability when unexpected changes occur, a new control policy is needed. CSCW[Computer Supported Cooperative Work] based shop floor control casts a different view on scheduling problems. Decisions are made locally when requested and useful information is scattered among agents for its efficient use. Adaptation is easy because agents are -'plug compatible or portable. In this paper, scheduling problems occurring under CSCW based shop floor control are identified and characterized. Traditional scheduling problems are reviewed from the CSCW viewpoint. All the control entities involved in the shop floor can be found and used to defined agents. With these entities and CSCW concept, possible scheduling problems are identified.

• 연구논문집
• /
• s.34
• /
• pp.113-119
• /
• 2004

Recently, the conventional concept of a machine-tool in manufacturing systems is changing from the target of integration to the autonomous manufacturing device based on a knowledge evolution. Subsequently, a machine-tool has been the subject of a cooperation through an advanced environment where an open architecture controller, high speed network and internet technology are contained In the future, a machine-tool will be more improved in the form of a knowledge evolution based device. In order to develop the knowledge evolution based machine-tool, this paper proposes the structure of knowledge evolution and the scheme of a dialogue agent among agent-based modules such as a sensory module, a dialogue module, and an expert system. The dialogue agent has a role of interfacing with another machine for cooperation. To design of the dialogue agent module in M2M(Machine To Machine)environment, FIPA-OS and ping agent based on FIPA-OS are analyzed in this study. Through this, it is expected that the dialogue agent module can be more efficiently designed and the knowledge evolution based machine-tool can be hereafter more easily implemented.

• Journal of the Korean Society of Industry Convergence
• /
• v.8 no.2
• /
• pp.69-76
• /
• 2005

This study for Customer Satisfaction(Customer Focus) by Profit security' in the field Process improvement activity and man-power upgrade by DAS(DATA Acquisition System) in the Plant that is fusion Off Line and On Line(IT), Especially the basic of the most foundation in the beginning Step of Toyota system is 3-jeong(a standard instrument; right volume, right box, right position), 5S(Seiri, Seiton, Seisoh, Seiketsu, Sitsuke ; KAISEN, KANBNA System(for Logistic), Further more KPC has established the digital environment such as CIM ; Computer Integrated Manufacturing), IMS ; Intelligent Manufacturing System ERP ; Enterprise Resource Planning, DAS; Data Acquisition System, Autonomous QC & SPC etc,.) in order to realize the intelligent informatization, which is core base for obtaining the competitive power and for responding to the various 21C management environment in flexibility. In this digital management environment, continuously and powerfully they would advance for becoming the best of the world. For strategic changes to take place in industry 3 key important factors need to be included ; Integration of tasks function and process, Decentralization of information, Responsibility, Finally simplification of products and product structures.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.12
• /
• pp.14-20
• /
• 2020

Currently, the automotive market is intensively researching eco-friendly vehicles such as EV vehicles and hydrogen vehicles. Further, research and developments for the future markets such as autonomous vehicles and the connective cars are coped up continuously along with the rising fuel economy regulations and the emission regulations. In this development, various sensors, batteries, and control devices are fused in order to decrease the weight of the vehicle. Moreover, since the fuel economy regulation is an issue, research on the weight reduction of body parts is underway. Therefore, in this work, a study is conducted to obtain the optimal design of the Dash part that separates the engine room and the passenger seat of the vehicle body by combining lightweight materials with high rigidity materials. The optimal design was obtained using the Finite Element Analysis. Further, AL5083 was used as the lightweight material and ASBC1470 was used for high strength materials. The parts made with this combination of materials had strength equivalent to that of the existing steel and the weight was reduced by 10%.

• Journal of Mechanical Science and Technology
• /
• v.20 no.11
• /
• pp.1863-1872
• /
• 2006

In FMS (Flexible Manufacturing System) and CIM (Computer Integrated Manufacturing), machine-tools have been the target of integration in the last three decades. The conventional concept of integration is being changed into the autonomous manufacturing device based on the knowledge evolution by applying advanced information technology in which an open architecture controller, high-speed network and internet technology are included. In the advanced environment, the machine-tools is not the target of integration anymore, but has been the key subject of cooperation. In the near future, machine-tools will be more improved in the form of a knowledge-evolutionary intelligent device. The final goal of this study is to develop an intelligent machine having knowledge-evolution capability and a management system based on internet operability. The knowledge-evolutionary intelligent machine-tools is expected to gather knowledge autonomically, by producing knowledge, understanding knowledge, reasoning knowledge, making a new decision, dialoguing with other machines, etc. The concept of the knowledge-evolutionary intelligent machine is originated from the machine control being operated by human experts' sense, dialogue and decision. The structure of knowledge evolution in M2M (Machine to Machine) and the scheme for a dialogue agent among agent-based modules such as a sensory agent, a dialogue agent and an expert system (decision support agent) are presented in this paper, with intent to develop the knowledge-evolutionary machine-tools. The dialogue agent functions as an interface for inter-machine cooperation. To design the dialogue agent module in an M2M environment, FIPA (Foundation of Intelligent Physical Agent) standard platform and the ping agent based on FIPA are analyzed in this study. In addition, the dialogue agent is designed and applied to recommend cutting conditions and thermal error compensation in a tapping machine. The knowledge-evolutionary machine-tools are expected easily implemented on the basis of this study and shows a good assistance to sensory and decision support agents.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.713-716
• /
• 1991

This paper describes a methodology of mobile robot navigation which is designed to carry heavy payloads at high speeds to be used in FMS(Flexible Manufacturing System) without human control. Intelligent control scheme using fuzzy logic is applied to the navigation control. It analyzes sensor readings from multi-sensor system, which is composed of ultrasonic sensors, infrared sensors and odometer, for environment learning, planning, landmark detecting and system control. And it is implemented on a physical robot, AGV(Autonomous Guided Vehicle) which is a two-wheeled, indoor robot. An on-board control software is composed of two subsystems, i.e., AGV control subsystem and Sensor control subsystem. The results show that the navigation of the AGV is robust and flexible, and a real-time control is possible.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.2
• /
• pp.92-99
• /
• 2007

Welding fabrication invariantly involves three district sequential steps: preparation, actual process execution and post-weld inspection. One of the major problems in automating these steps and developing autonomous welding systems, is the lack of proper sensing strategies. Conventionally, machine vision is used in robotic arc welding only for the correction of pre-taught welding paths in single pass. In this paper, novel presented, developed vision processing techniques are detailed, and their application in welding fabrication is covered. The software for joint tracking system is finally proposed.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1553-1558
• /
• 2007

This paper presents a vision based autonomous inspection system for welding quality control of car sinking seat. In order to overcome the precision error that arises from a visible inspection by operator in the manufacturing process of a car sinking seat, this paper proposes the MVWQC (machine vision based welding quality control) system. This system consists of the CMOS camera and NI machine vision system. The image processing software for the system has been developed using the NI vision builder system. The geometry of welding bead, which is the welding quality criteria, is measured by using the captured image with median filter applied on it. Experiments have been performed to verify the proposed MVWQC of car sinking seat.

• International Journal of Precision Engineering and Manufacturing
• /
• v.4 no.1
• /
• pp.43-48
• /
• 2003

A linear laser-vision sensor called ‘Perception TriCam Contour' is mounted on an industrial robot and often used for various application of the robot such as the position correction and the inspection of a part. In this paper, a sensor center position calibration is presented for the most accurate use of the robot-Perceptron system. The obtained algorithm is suitable for on-site calibration in an industrial application environment. The calibration algorithm requires the joint sensor readings, and the Perceptron sensor measurements on a specially devised jig which is essential for this calibration process. The algorithm is implemented on the Hyundai 7602 AP robot, and Perceptron's measurement accuracy is increased up to less than 1.4mm.