• Journal of Auto-vehicle Safety Association
• /
• v.13 no.4
• /
• pp.123-128
• /
• 2021

This paper present box feature estimation from LiDAR point cluster using maximum likelihood Method. Previous LiDAR tracking method for autonomous driving shows high accuracy about velocity and heading of point cluster. However, Assuming the average position of a point cluster as the vehicle position has a lower accuracy than ground truth. Therefore, the box feature estimation algorithm to improve position accuracy of autonomous driving perception consists of two procedures. Firstly, proposed algorithm calculates vehicle candidate position based on relative position of point cluster. Secondly, to reflect the features of the point cluster in estimation, the likelihood of the particle scattered around the candidate position is used. The proposed estimation method has been implemented in robot operating system (ROS) environment, and investigated via simulation and actual vehicle test. The test result show that proposed cluster position estimation enhances perception and path planning performance in autonomous driving.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.5
• /
• pp.202-217
• /
• 2021

Following the fatal accident of pedestrians caused by Autonomous Vehicle by Uber, the world's largest ride-hailing company, two people were killed in a self-driving car accident by Tesla in April. There is a need to ensure the safety of road users. Accordingly, in order to secure the safety of Autonomous Vehicle driving, it is necessary to evaluate Autonomous Vehicle driving technologies in various situations based on the road and traffic environment in which the Autonomous vehicle will actually drive. Therefore, this study used UC-win/Road ver.14.0 based on general driver's license test questions to present a virtual reality-based Autonomous Vehicles driving ability evaluation tool among various driving ability test method. Based on this, it was intended to test driving ability for unexpected situations in complex and diverse driving environments, and to confirm its practical applicability as an optimal tool for Autonomous vehicle ability test and evaluation.

• ETRI Journal
• /
• v.45 no.1
• /
• pp.75-92
• /
• 2023

Level 3 autonomous vehicles require conditional autonomous driving in which autonomous and manual driving are alternately performed; whether the driver can resume manual driving within a limited time should be examined. This study investigates whether the demographics and subjective driving tendencies of drivers affect the take-over performance. We measured and analyzed the reengagement and stabilization time after a take-over request from the autonomous driving system to manual driving using a vehicle simulator that supports the driver's take-over mechanism. We discovered that the driver's reengagement and stabilization time correlated with the speeding and wild driving tendency as well as driving workload questionnaires. To verify the efficiency of subjective questionnaire information, we tested whether the driver with slow or fast reengagement and stabilization time can be detected based on machine learning techniques and obtained results. We expect to apply these results to training programs for autonomous vehicles' users and personalized human-vehicle interfaces for future autonomous vehicles.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.12
• /
• pp.5842-5861
• /
• 2019

A current autonomous vehicle determines its driving strategy by considering only external factors (Pedestrians, road conditions, etc.) without considering the interior condition of the vehicle. To solve the problem, this paper proposes "An Optimal Driving Support Strategy(ODSS) based on an Genetic Algorithm for Autonomous Vehicles" which determines the optimal strategy of an autonomous vehicle by analyzing not only the external factors, but also the internal factors of the vehicle(consumable conditions, RPM levels etc.). The proposed ODSS consists of 4 modules. The first module is a Data Communication Module (DCM) which converts CAN, FlexRay, and HSCAN messages of vehicles into WAVE messages and sends the converted messages to the Cloud and receives the analyzed result from the Cloud using V2X. The second module is a Data Management Module (DMM) that classifies the converted WAVE messages and stores the classified messages in a road state table, a sensor message table, and a vehicle state table. The third module is a Data Analysis Module (DAM) which learns a genetic algorithm using sensor data from vehicles stored in the cloud and determines the optimal driving strategy of an autonomous vehicle. The fourth module is a Data Visualization Module (DVM) which displays the optimal driving strategy and the current driving conditions on a vehicle monitor. This paper compared the DCM with existing vehicle gateways and the DAM with the MLP and RF neural network models to validate the ODSS. In the experiment, the DCM improved a loss rate approximately by 5%, compared with existing vehicle gateways. In addition, because the DAM improved computation time by 40% and 20% separately, compared with the MLP and RF, it determined RPM, speed, steering angle and lane changes faster than them.

• Journal of Auto-vehicle Safety Association
• /
• v.14 no.4
• /
• pp.84-90
• /
• 2022

With the popularization of autonomous driving technology, safety has emerged as a more important criterion. However, there are no assessment protocol or methods for AES (Autonomous Emergency Steering). So, this study proposes AES assessment protocol and scenario corresponding to collision avoidance Car-to-Car scenario of Euro NCAP in order to prepare for obstacles that appear after the emergency steering of LV (Leading Vehicle) avoiding obstacles in front of. Autoware-based autonomous driving stack is developed to test and simulate scenario in CARLA. Using developed stack, it is confirmed that obstacle avoidance is successfully performed in CARLA, and the AES performance of VUT (Vehicle Under Test) is evaluated by applying the proposed assessment protocol and scenario.

• International Journal of Automotive Technology
• /
• v.7 no.2
• /
• pp.227-235
• /
• 2006

In this paper a robust image processing method with modified Otsu algorithm to recognize the road lane for a real-time controlled autonomous vehicle is presented. The main objective of a proposed method is to drive an autonomous vehicle safely irrespective of road image qualities. For the steering of real-time controlled autonomous vehicle, a detection area is predefined by lane segment, with previously obtained frame data, and the edges are detected on the basis of a lane width. For stable as well as psudo-robust autonomous driving with "good", "shady" or even "bad" road profiles, the variable threshold with modified Otsu algorithm in the image histogram, is utilized to obtain a binary image from each frame. Also Hough transform is utilized to extract the lane segment. Whether the image is "good", "shady" or "bad", always robust and reliable edges are obtained from the algorithms applied in this paper in a real-time basis. For verifying the adaptability of the proposed algorithm, a miniature vehicle with a camera is constructed and tested with various road conditions. Also, various highway road images are analyzed with proposed algorithm to prove its usefulness.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.3
• /
• pp.223-230
• /
• 2021

Currently, self-driving vehicles are on the verge of commercialization after testing. However, even though autonomous vehicles have not been fully commercialized, 81 accidents have occurred, and the driving method of vehicles to avoid accidents relies heavily on LiDAR. In order for the currently commercialized 3-level autonomous vehicle to develop into a 4-level autonomous vehicle, more information must be collected than previously collected information. Therefore, this paper proposes a Driving Situation Judgment System (DSJS) that accurately calculates the crisis situation the vehicle is in by useing the roughness of the road and the state of the passengers of surrounding vehicles including road information and weather information collected from existing autonomous vehicles. As a result of DSJS's PDM experiment, PDM was able to classify passengers 15.52% more accurately on average than the existing vehicle's passenger recognition system. This study can be a basic research to achieve the 4th level autonomous vehicle by collecting more various types than the data collected by the existing 3rd level autonomous vehicle.

• Journal of Auto-vehicle Safety Association
• /
• v.13 no.4
• /
• pp.14-19
• /
• 2021

This paper presents LiDAR static obstacle map based vehicle dynamic state estimation algorithm for urban autonomous driving. In an autonomous driving, state estimation of host vehicle is important for accurate prediction of ego motion and perceived object. Therefore, in a situation in which noise exists in the control input of the vehicle, state estimation using sensor such as LiDAR and vision is required. However, it is difficult to obtain a measurement for the vehicle state because the recognition sensor of autonomous vehicle perceives including a dynamic object. The proposed algorithm consists of two parts. First, a Bayesian rule-based static obstacle map is constructed using continuous LiDAR point cloud input. Second, vehicle odometry during the time interval is calculated by matching the static obstacle map using Normal Distribution Transformation (NDT) method. And the velocity and yaw rate of vehicle are estimated based on the Extended Kalman Filter (EKF) using vehicle odometry as measurement. The proposed algorithm is implemented in the Linux Robot Operating System (ROS) environment, and is verified with data obtained from actual driving on urban roads. The test results show a more robust and accurate dynamic state estimation result when there is a bias in the chassis IMU sensor.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1113-1114
• /
• 1996

We describe an algorithm to control an autonomous guided vehicle with 2-diagonal driving wheels, which navigates in the clean room.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.173-176
• /
• 2021

Autonomous-driving is a major technology that leads to the fourth industrial revolution. Due to recent advances in autonomous-driving technologies and deregulation, it is expected that commercialization of autonomous vehicle with level 3 or higher will begin in earnest. This research aims to evaluate the competitiveness of technology through patent analysis in autonomous driving field. In this study, patent trends were analyzed and patent indicators were analyzed for patents in Korea, the United States, Japan, and Europe that were published and registered until July 2021. Through this, it is going to identify detailed technologies that need to be focused on in order to be competitive in autonomous driving technologies and diagnose Korea's national competitiveness.