• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.780-783
• /
• 2009

The application of MOST150 technology has been required to satisfy the demand for the automotive infotainment system and the higher bandwidth requirements caused by the increase of the multimedia processing capacity. The Ethernet technology applied gateway was implemented for an efficient transmission of multimedia, a vehicle diagnosis, an external communication, a data processing between the MOST150 and the CAN communication method applied to many existing vehicles. The new algorithm and application were suggested in order to efficiently perform the data processing between other types of communication systems. The existing MOST150 frame is mainly composed of the Control Channel, the Legacy Packet Channel(async) and the Synchronous /Isochronous Channels and performs the data processing through these sequential channels. With the sense of this process, this study suggested the new algorithm that the Mapping method of the IETF's QoS Management was applied to the MOST150 technology for the efficient QoS.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.98-101
• /
• 2009

Recently, there is use of the vehicle network for vehicle diagnostic method and Increased use of the vehicle protocol such as (CAN(Controller Area Network), MOST, LIN, FlexRay), Distributed control and data about the vehicle are being sought methods for real-time observation and monitoring and trend tends to have gone into this. In this case of automotive diagnostic module in today, there is Primarily to use DLC(Data Link Connector)Connector called self-check terminal. Generally, vehicle Diagnoses to use DLC Connector such as OBD2(On Board Diagnostics) Through Diagnostic Module(scanner). But there limit diagnostic as engine and powertrain part, and not consider user's perspective In this paper, By designing Vehicle diagnostic monitoring system using Ethernet Port, transmit and Receives CAN protocol vehicle data, and implement Easily monitoring system that provide and Diagnoses to provide vehicle's state and information to use PC.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.6 no.3
• /
• pp.117-123
• /
• 2011

In this paper, we design the hardware platform and implement the embedded software based on the FPGA and the DSP for the automotive 77GHz FMCW radar system. This embedded software is built into the DSP as the multi-tasking architecture to support the basic target detection algorithm and the Ethernet link. The designed GUI(Graphic User Interface) provides ability to adjust parameters associated with the radar performance, to monitor signal processing results, and to download the raw received signal. The designed platform can be used to develop the optimal detection algorithms for the various applications.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.32 no.6
• /
• pp.1171-1181
• /
• 2022

Front Collision-Avoidance Assist (FCA) or Smart Cruise Control (SCC) is installed in a modern vehicle, and the amount of data exchange between ECUs increases rapidly. Therefore, Automotive Ethernet, especially SOME/IP, which supports wide bandwidth and two-way communication, is widely adopted to overcome the bandwidth limitation of traditional CAN communication. SOME/IP is a standard protocol compatible with various automobile operating systems, and improves connectivity between components in the vehicle. However, no encryption or authentication process is defined in the SOME/IP protocol itself. Therefore, there is a need for a security study on the SOME/IP protocol. This paper proposes a deep learning-based intrusion detection system in SOME/IP and performs six attacks to confirm the performance of the intrusion detection system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.267-270
• /
• 2021

In order to diagnose a vehicle, it is achieved by collecting diagnostic data within the ECU or between ECUs and managing the diagnostic data by utilizing various communication methods through an electronic device composed of an ECU(Electronic Control Unit), which is an automotive electronic device. As communication methods, LIN, CAN, FlexRay are mainly used. Recently, wired/wireless communication is being used based on Ethernet. In order to perform vehicle diagnosis, it is necessary to know the diagnosis code generated by the ECU and to collect diagnosis data using diagnosis communication. In addition, diagnostic data can be managed from the ECU only when the application software required for vehicle diagnosis is configured. If many automobile manufacturers are manufacturing ECUs based on the AUTOSAR standard, which is an automotive electronic standard, the software structure is also configured to be applied according to the standard. In this paper, we understand the vehicle diagnosis communication method of the AUTUSAR standard, study the configuration and processing method of diagnosis data, and study the contents of software components, diagnosis communication, and diagnosis event processing.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.11
• /
• pp.1036-1044
• /
• 2012

Thanks to progressive development of IT technology, the number of intelligent devices communicating each other through an In-Vehicle Network(IVN) has been steadily increasing. It is expected that the required network bandwidth and network nodes for vehicle control in 2015 will be increased by two times and one and half times as compared to in 2010, respectively. As a result, many researchers in automotive industry has showed a significant interest on industrial Ethernets, such as EtherCAT and TTEthernet. This paper addresses an analysis on transmission delay and fault recovery performance with an EtherCAT network which is being considered as an IVN. A mathematical model based on the analysis is verified through a set of experiments using an experimental network setup.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.5
• /
• pp.1049-1057
• /
• 2017

In-vehicle multimedia systems are one of the most important factors in the automotive industry. Especially, multimedia systems are more important in advanced commercial vehicles such as premium express buses. In this paper, we proposed a multimedia streaming system architecture using MEP(MOST Ethernet Packets) for premium express buses based on MOST150. We have designed and implemented the prototype of proposed multimedia streaming system. We have designed a board based on i.MX6 to operate a proposed multimedia streaming system. The software has designed a multimedia system for premium express buses based on Android which is an open source platform. MOST(Media Oriented Systems Transport) is a high-speed multimedia network technology for in-vehicle multimedia system. The MOST network is able to manage up to 64 devices and ring topology is used basically. In addition, the MOST Network meets EMI(Electro-Magnetic Interference)/ EMC(Electro-Magnetic Compatibility) requirements because it uses plastic optical fibers(POF).

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.6
• /
• pp.24-33
• /
• 2011

This paper describes a gateway system based on a MOST network for integrating several different automotive network protocols. For transparent data communication among different protocols regardless of the high-level messages and the data format, Pseudo MOST frame was designed based on MOST frame and this pseudo MOST data frame is used as the data carrier. For automotive application, two types of gateways were developed, one board-type gateway and small-sized module-type gateways. One board-type gateway has ethernet port, video port and audio port. Meanwhile, small-sized module-type gateways are developed for video, audio, bluetooth and Flexray, respectively. Experiments with a network system using several small-sized module gateways verified efficient data communication among different network protocols and confirmed the effectiveness of the proposed gateway system for automotive network integration.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2023.11a
• /
• pp.1125-1126
• /
• 2023

자동차 산업 기술이 빠른 속도로 발전되고 E/E(Electrical/Electronic) 시스템의 기능 안전 메커니즘이 중요시되고 있다. Renesas 사(社)의 차량용 MCU 와 차량용 네트워크인 CAN(Controller Area Network)과 Ethernet 을 사용하여 통신이 끊기거나 Noise 가 발생해도 정상동작이 가능하도록 하는 Fail-Operational 알고리즘을 구현하였다. 이 연구를 통해 현재 기능 안전의 중요도가 높아지고 있는 자동차 기술 시장의 수요를 맞출 수 있을 것으로 기대한다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.6
• /
• pp.311-318
• /
• 2016

Recent vehicles are using car internal network for various purposes such as vehicle control, diagnostic functions, and ECU program upgrade. Currently CAN and FlexRay are the most representative networks. In the next-generation network, the use of CAN FD and car ethernet is actively studied. In this paper, we aimed to compare and evaluate the diagnostic function and the program of the ECU from the upgrade view on characteristics related to download time for each network when CAN, CAN FD, and FlexRay network are applied. As a result of the simulation, it was possible to determine that the CAN FD network is currently the most suitable for the next-generation network by suppressing other networks in terms of cost performance even under conditions of 500 Kbps and 2 Mbps which are practically usable speeds.