• The Journal of the Acoustical Society of Korea
• /
• v.22 no.6
• /
• pp.505-511
• /
• 2003

As the technique of automobile industry is being advanced, the advancement of vehicle ride is being required. In order to achieve this purpose, the study on the vibration which are produced by moving vehicle is carried out actively. In order to analysis, the tire vibration characteristics for passing over a cleat, the tire is modeled with 7-DOFs (degree of freedom). The model is verified against simulations and experiments. The effects of proposed tire design parameters such as the tire tread rubber, tread ring, apex are considered. According to the results of analysis, the tire design parameters that can reduce the tire and wheel vibration quantity are conducted.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.41 no.1
• /
• pp.127-143
• /
• 2016

This study applied DEA analysis to measure the relative efficiency of 35 companies that produce automobile body components. First, the input and output, the improvement target value of the calculated variables, and the reference group for benchmarking for inefficient groups to become efficient groups were established through DEA analysis. In addition, whether inefficiency was due to technical inefficiency or size was analyzed in connection with the cases of the actual companies through the measurement of scale efficiency. Second, a route for efficiency improvement was derived through DEA-Tier analysis by defining the possible group for benchmarking in actuality within the production industry of automobile body components where the primary cooperative company belonged. Third, the financial variables that generate the difference between efficient and inefficient groups were derived through logistic regression analysis. Financial strategies that determine the direction the indices should be improved to allow the inefficient group to become an efficient one were recommended. This research is expected to provide diagnostic methods for management efficiency and the direction of improvement to enhance the management efficiency of automotive parts makers by identifying the causes of the inefficiency of domestic automotive parts makers empirically. The study also provides financial strategies together with the target values of efficiency improvement for each individual company.

• Journal of the Korean Institute of Gas
• /
• v.14 no.6
• /
• pp.38-43
• /
• 2010

According to the lack of resources and the stringency of environmental regulations, a study of the high strength thin plate sheet steels for automobile have been become an important issue for automobile industry. However, the problem of hydrogen embrittlement of high strength sheet steels was concerned with the degradation of mechanical properties. Therefore, we studied the hydrogen behavior of surface layers of 590MPa DP sheet steels on development using by relationship the microstructure of subsurface and the distribution of micro hardnesses. Hydrogen was charged into the specimens using by the cathodic electrolytic method. The behavors of under surface layers were investigated by the observation of microstructures and the micro vickers hardness test with the amount of hydrogen charging with hydrogen charging conditions.

• The Journal of Economics, Marketing and Management
• /
• v.11 no.5
• /
• pp.15-27
• /
• 2023

Purpose: Taking Tesla Motors as a case study object, this research aims to summarize the management strategy of Tesla Motors through an evaluation of its business models in Korea and China then helps other new energy automobile enterprises in formulating strategic directions in a targeted manner. Research design, data and methodology: Using the case study method, this study conducts in-depth research on the business model of Tesla, a representative enterprise of the new energy automobile industry. This study mainly uses secondary data obtained from the official websites to support our research. Results: With its top-level innovative technology, distinctive marketing model, and extensive strategic model, Tesla holds the largest share of the new energy vehicle market. Local market brands such as BYD and Hyundai-Kia still have a considerable competitive advantage, and there is a need to learn from each other for further development. Conclusions: To adapt to the needs of economic transformation and environmental development, implementing business strategies related to new energy automobile enterprises is a topic worthy of study. Enterprises such as BYD and Hyundai-Kia have unique advantages in their home markets. However, as sustainable development progresses, these advantages will gradually weaken, and further measures are necessary to maintain their competitive advantage.

• KSBB Journal
• /
• v.29 no.5
• /
• pp.307-315
• /
• 2014

Recently seaweed polysaccharides have been extensively studied for alternative energy application. Because their producing cost is high and efficiency low, their industrial applications have been limited. The main component of cell wall of red algae represented by Gelidiales and Gracilariales is agar. Red-algae agar or galactan, consisting of D-galactose and 3, 6-anhydro-L-galactose, is suitable for bio-product application if hydrolyzed to monomer unit. For the hydrolysis of algae, chemical or enzymatic treatment can be used. A chemical process using a strong acid is simple and efficient, but it generates together with target sugar and toxic compounds. In an enzymatic hydrolysis process, target sugar without toxic compounds generation. The objective of this review is to summary the recent data of saccharification by chemical and enzymatic means from red seaweed for especially focused on automobile industry.

• Korean Journal of Occupational Health Nursing
• /
• v.7 no.2
• /
• pp.130-135
• /
• 1998

To investigate the working characteristics of the workers by place of duty, a study was carried out among 591 male workers aged 20-55 employed in an automobile industry in Korea. Workers participated to this study were divided into low back pain(LBP) and control group, according to the self-reports by written questionnaires. Work factors and complaint rates of low back pain were compared to the work places. The results were as follows ; 1) The complaint rates of low back pain were 49.2%(292 men) as a whole, 58.6%(34 men) in Production Control Department I, 50.2%(120 men) in Stamping Tool Department, 46.9%(138 men) in Bus Department. 2) Lifting and earring work of individual workers were directly associated with low back pain. Frequency of lifting and carring work is higher in the Final Body Section(Production Dept. I) and Body I Section(Bus Dept.). 3) LBP group were more frequently involved in working in awkward position(Quality Control Section of Stamping Tool Dept.), bending(Body I Section of Bus Dept.) and twisting posture(Sash Section and Body I Section of Bus Dept.). 4 )Workers exposed to vibration during working shows the higher complaint rate of low back pain.

• The International Journal of Costume Culture
• /
• v.12 no.2
• /
• pp.129-140
• /
• 2009

In this study, the effect of innovativeness of external networks on the corporate innovativeness and innovation performance were explored based on web survey data collected from 230 manufacturing companies. Specifically, according to the manufacturers' business categories divided by the technology level, three groups such as advance technology (electronic/IT), mid- to high technology (automobile/machine), and low technology (textile/clothing) companies were investigated to find out which external network influences corporate innovativeness and innovation performance. In the result, textile/clothing companies were not different in company size, history, and innovation effort from advanced technology and mid- to high technology companies. Collectively, the innovativeness of external networks affected corporate innovativeness and innovation performance. In the result by a business category, innovativeness and innovation performance of textile/clothing companies were affected by the innovativeness of competitors, whereas automobile/machine companies in the mid- to high technology group were affected by suppliers. In addition, advanced technology (electronics/IT) were affected by buyers and competitors. These differences suggest that the way to use vertical networks toward upstream (e.g., suppliers) and downstream (e. g., buyers) as well as horizontal networks toward competitors can be different by the business category of manufacturers. The result would provide implications for the academia and the industry.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.3
• /
• pp.58-65
• /
• 2010

Remanufacturing is a process that restores old products to perform like new, while saving energy, reducing consumption of natural resources, and lowering environmental emissions. By extending the product life cycle, remanufacturing approaches enable closed loop material cycles that are ultimately necessary for a sustainable society. This paper provides some description of the current automotive remanufacturing enterprise, with a particular emphasis on key vehicle components that are currently remanufactured. The analysis yields two major conclusions. First, volume of the USA automotive after sales and remanufacturing industry market is estimated. Second, market price of a remanufactured component in the automotive sector is surprisingly uncorrelated with the number of companies engaged in remanufacturing that component - at least for companies registered with the Automotive Parts Remanufacturing Association (ARPA).

• Proceedings of the Korean Society for Quality Management Conference
• /
• 2004.04a
• /
• pp.38-43
• /
• 2004

Customer satisfaction is becoming an increasingly salient topic in many firms and in academic research. One main rationale behind this interest is that customer satisfaction is believed to be associated with fruitful customer re-visit from the firm's point of view. Some country already had index models which can measure the degree of customer satisfaction. But, such models are ordinary models which used generally the scope of nation-wide industry. Therefore, we needs some modifications to measure customer satisfaction for specific product & service and to provide the valuable feedback to specific firms. In this perspectives, this study will evaluate the customer satisfaction index about automobile company and analyze it's result for valuable feedback. This study will present a model for an integrated customer satisfaction evaluation system which used structural equation modeling. Through this study, we anticipate that it will offer the measuring method about customer satisfaction and some guideline for product design process.

• Journal of the Korean Society of Industry Convergence
• /
• v.4 no.3
• /
• pp.267-273
• /
• 2001

In this study, the survival rate of fiber is investigated by nozzle size difference in injection/mold sides. The survival rate of fiber is influenced about the nozzle size differ. Also, The mechanical properties of short carbon glass fiber reinforced polypropylene are experimentally measured as functions of fiber volume fraction and nozzle size difference. These mechanical properties are compared with the survival rate of fiber and fiber volume fraction using image analysis after pyrolytic decomposition. The survival rate of fiber as well as fiber volume fraction is influenced by injection processing condition, the used materials, mold conditions and nozzle sides difference, etc, In particular, the survival rate of fiber is great influenced when injection/mold nozzle sides are different more than that of the same. Consequently, the mechanical properties of short carbon/glass fiber reinforced polypropylene arc improved as the nozzle sides are the same in injection mold sides.