• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.8
• /
• pp.942-949
• /
• 2012

In order to ensure the safety of the large-scale public facilities, the analysis of EMC(ElectroMagnetic Compatibility) of electronic systems included in the facilities is very necessary. The reason is that the system-level EMC of the facility could be not guaranteed, even if individual equipments included in the facility are satisfied with their EMC requirements. As a result, the system-level evaluation and analysis of EMC should be carried out in order to establish the reliable operations of safety and mission-critical electronic systems. This paper analyze the relevant legal systems of domestic and other countries, and furthermore case studies of system-level EMC approaches were analyzed in the specific applications of electric railways, building, automobile, petroleum refinery systems. And the introduction of related systems in Korea is proposed, and main parts and problems to be looked at each proposed measures are discussed. The results are expected to be utilized in the introduction of the system-level EMC engineering, and contributed in national security and the protection of people's life, body and their properties.

• Journal of Veterinary Clinics
• /
• v.24 no.2
• /
• pp.276-279
• /
• 2007

A 2-year-old male, 3 kg body weight Japanese Chin was injured in the automobile accident three months ago. The dog became antebrachiocarpal joint instability, and performed pancarpal arthrodesis using 3 K-wires in localanimal hospital. But, the result was failure. Therefore the dog was referred to Chonbuk Animal Medical Center, Chonbuk National University. In physical examination, right carpal joint instability, knuckling sign and pain were evident. In radiography, sclerosis was observed on the 4th carpal bone. Complete blood count (CBC), serum chemistry and urinalysis finding were within reference ranges. Pancarpal arthrodesis was re-performed using 7-hole plate. However, mild skin and muscle defects was appeared by skin tension of extremity. We expected that granulation would fill the defect, but inflammation was continued on the lesions for 3 days. So, operation which is filling it was done by using the muscle flap and tubed skin flap. The donor muscles were flexor carpi radialis and superficial digital flexor muscles. After 7 days, the muscle flap was survived, but tubed skin flap was necrosed. After 20 days, the skin defect was substituted with granulation tissues. The flexor carpi radialis muscle and superficial digital flexor muscle transposition can be a useful procedure for reconstructing soft tissue defects in the carpal and metacarpal areas.

• Journal of Welding and Joining
• /
• v.25 no.6
• /
• pp.71-77
• /
• 2007

Until now, many researches on laser-arc hybrid welding processes have been conducted mainly for high power CW laser and high direct current arc to weld the thick steel plates for shipbuilding. Recently, however the usage of thin steel plates, which tend to be deformed easily by thermal energy, is been increasing because of demand of light structure such as car body in the automobile industry. Accordingly, heat sources having relatively low heat input such as pulsed laser, dip-transfer DC GMA and pulsed GMA seem to be applied more increasingly and the study about those heat sources is needed more intensively. Any heat source mentioned above can not stand alone without weld defects at a relatively high welding speed for increasing the welding productivity. This is main reason to apply the hybrid welding process which uses pulsed laser and low-heat-input GMA heat sources simultaneously to weld the thin steel plate. In this study, parameters of pulsed laser and dip-transfer DC GMA welding are studied firstly through preliminary experiments, and then analyzed in the viewpoint of their physical phenomena. Before conducting the hybrid welding, a pulse control technique is developed based on the parallel port communication and Visual C++ 6.0. Owing to development of this technique, interactions of laser and arc pulses can be controlled consistently. Using the pulse control technique, the hybrid welding is conducted and then its interactive welding phenomenon is analyzed.

• Journal of Welding and Joining
• /
• v.26 no.5
• /
• pp.74-78
• /
• 2008

The laser welding of the car body and components has been spread in the automotive industry. The Nd:YAG laser welding system could be used in 3D welding with robot. However, this system cannot efficiently reduce the welding cycle time according to various welding sequences because the robot's moving time is same that of the resistant spot welding system. But the remote welding system with high power $CO_2$ laser and scanner makes it possible welding cycle time much faster than the robot laser welding system. In the $CO_2$ laser remote welding system, laser beam can be rapidly transferred to a workpiece by moving mirrors of scanner system. So, it makes reducing the cycle time of welding process and shaping various welding patterns easily. Therefore, in this paper, the characteristic of weld strength according to patterns of weld bead on $CO_2$ laser welding was investigated. Also, the relationship between shape of weld bead and value of tensile load was studied. Finally, the optimum remote welding condition for car bumper was investigated.

• Korean Journal of Materials Research
• /
• v.16 no.11
• /
• pp.681-686
• /
• 2006

Plasma nitrocarburising and plasma post oxidation were performed to improve the wear and corrosion resistance of S45C and SCM440 steel by a plasma ion nitriding system. Plasma nitrocarburizing was conducted for 3h at $570^{\circ}C$ in the nitrogen, hydrogen and methane atmosphere to produce the ${\varepsilon}-Fe_{2-3}$(N, C) phase. Plasma post oxidation was performed on the nitrocarburized samples with various oxygen/hydrogen ratio at constant temperature of $500^{\circ}C$ for 1 hour. The very thin magnetite ($Fe_3O_4$) layer $1-2{\mu}m$ in thickness on top of the $15{\sim}25{\mu}m$ ${\varepsilon}-Fe_{2-3}$(N, C) compound layer was obtained by plasma post oxidation. A salt spray test and electrochemical testing revealed that in the tested 5% NaCl solution, the corrosion characteristics of the nitrocarburized compound layer could be further improved by the application of the superficial magnetite layer. Throttle valve shafts were treated under optimum plasma processing conditions. Accelerated life time test results, using throttle body assembled with shaft treated by plasma nitrocarburising and post oxidation, showed that plasma nitrocarburizing and plasma post oxidation processes could be a viable technology in the very near future which can replace $Cr^{6+}$ plating.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.9
• /
• pp.1026-1034
• /
• 2012

The purpose of this study was to verify the validation of effect on improvement of muscle strength unbalance according to exercise load deviation during rowing exercise. We performed evaluation of muscular activity and joint torque before the test. We recruited twenty subjects who one side's muscle strength is bigger in more 20% than other side. Subjects divided two groups. One is dominant left side and the other was dominant right side. Subjects performed rowing exercise in electric load deviation rowing equipment (Robo.gym, Humonic Co., Ltd., Daegu, Korea). Exercise performed four sets a day including 25 times a set, and three days a week. Measurements consist of evaluation of muscular activity and joint torque. Exercise load deviation adapted that different value of muscle strength in both arms multiplied 1RM% and added 1RM 50%. The results in adapted load deviation showed that the differences of maximal peak torque in 22.75% were getting increase significantly during exercise in 5.72%. This interpreted that rowing exercise with loading deviation types could provide muscle strength and muscular endurance exercise in same time for balance. Our study found out that loading deviation could provide muscle strength and muscular endurance exercise for improving muscle unbalance.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.24 no.4
• /
• pp.47-57
• /
• 2018

Purpose and Methods: Currently, Korea has the lowest fertility rate among OECD countries. It is also true that from the aspect of encouraging childbirth policy, as the use of automobiles has increased, the interest in securing parking spaces has also become more important. However, there are efforts and researches on the supplying parking spaces for the general public in society not to the positive discrimination such as elders or pregnant women. On the other hand, there is a growing need for a dedicated parking space for pregnant women due to the changing social environment and increasing number of female drivers. At this point, proper design of the maternity parking spaces is essential. Therefore, this study is analyzing the characteristics of pregnant women such as measurements and certain actions and case studies of domestic and oversea. Through the analysis of these factors, the following results were derived. Results: First, it was determined that the important factor in the planning of the parking-block for pregnant women was the human body size of pregnant women. And the required dimensions of movement of pregnant women were derived. Second, the dimensions of automobile were analyzed and applied from the most used vehicles in the family composition. Third, after the observations, the status of the parking spaces of the pregnant women and observations showed that the drivers not only the pregnant women but others were using the spaces improperly. Fourth, at certain conditions of the parking spaces, in order to improve the efficiency of the parking spaces, it is necessarily considered that the usage of designated accessible parking spaces can be used together by not only the disabled but also to the passengers who are classified as 'transportation weak' such as pregnant women. Implications: In this study, the researcher will propose the shape and size of the parking-block for pregnant women considering the elements derived above.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.28 no.4
• /
• pp.393-405
• /
• 2018

Objective: This study examines the types of hazardous factors in the working environment and the time-trend for their exposure levels over 10 years (2007 to 2016). Study Design and Method: The types of hazardous factors and exposure levels were drawn from the 19 measurement reports on the working environment over 10 years at a shock absorber manufacturing facility. Risk assessment of the types of factors and time-trend of exposure levels were evaluated using the factors and exposure levels. Results: A total of 34 hazardous factors were evaluated. The types were noise, 15 organic compounds, seven kinds of acid sand alkalis, eight kinds of heavy metals, and three other compounds. Special management materials used were nickel, hexavalent chrome, and sulfuric acid. Human carcinogens (1A) used were trichloroethylene, nickel, and sulfuric acid. There were six types of substances belonging to the IARC's 2B (body carcinogens) classification or higher, including, methyl isobutyl ketone, ethyl benzene, and trichloroethylene. No detection was found for 627 out of the 2065 total measurements in 19 exposure survey reports, representing 30.4%. Organic solvents, acid and alkali products, and heavy metals showed continuous low exposure concentrations. Noise, welding fumes, and the evaluation of mixed solvents show a gradual decrease in geometric mean and maximum over the time-trend of 10 years. Conclusions: In the case of a shock absorber manufacturing facility, the hazardous factors of noise and the evaluation of mixed solvents still indicate high concentrations exceeding the exposure limits and necessitate reduction studies. These two factors and welding fumes showed a continuous decrease in their ten-year tendency. Organic compounds, acids/alkalis, and heavy metals were managed smoothly in a work environment of continuous low concentrations.

• Design & Manufacturing
• /
• v.16 no.2
• /
• pp.1-6
• /
• 2022

As environmental regulations are strengthened, automobile manufacturers continuously research lightweight structures based on carbon fiber reinforced plastic (CFRP). However, it is difficult to see the effect of strength reinforcement when using a single CFRP material. To improve this, a hybrid laminate in which CFRP is mixed with the existing body structural steel was proposed. In this paper, CFRP patch reinforcement is applied to each compression/tensile action surface of a 22MnB5 metal sheet, and it was evaluated through a 3-point bending experiment. Progressive failure was observed in similar deflection on bending deformation to each one-sided reinforced specimen. After progressive failure, the tensile reinforced specimen was confirmed to separate the damaged CFRP patch and 22MnB5 sheet from the center of the flexure. The compression reinforced specimen didn't separate that CFRP patch and 22MnB5, and the strength reinforcement behavior was confirmed. In the compression reinforced specimen, damaged CFRP patches were observed at the center of flexure during bending deformation. As a result of checking the specimen of the compression reinforcement specimen with an optical microscope, It is confirmed that the damaged CFRP patch and the reinforced CFRP patch overlapped, resulting in a concentrated load. Through the experimental results, the 22MnB5 strength reinforcement characteristics according to the reinforcement position of the CFRP patch were confirmed.

• Annals of Occupational and Environmental Medicine
• /
• v.34
• /
• pp.16.1-16.11
• /
• 2022

Background: Antimony is used in catalysts, pesticides, brake systems, pharmaceuticals, and synthetic fire retardants in the plastic, paint, and rubber industries. Accumulation of trivalent antimony compounds in the body can cause cardiotoxic effects and increase the risk of electrocardiogram (ECG) abnormalities and sudden death. Antimony exposure can result in action potential prolongation, causing a cardiac repolarization delay, which appears as QTc prolongation and T-wave abnormalities on the ECG. There are no studies on antimony-associated cardiac toxicity in Korea. Case presentation: Accordingly, the present study reports cases of ECG abnormalities in workers handling antimony trisulfide at a company located in the Gyeongsangbuk-do region. Nineteen workers employed at an automobile brake lining manufacturer were exposed to antimony trisulfide dust through thermoforming, grinding, and drilling processes. In 2020, the workers were reported to work 12-hour shifts, 5 days a week. The time-weighted average (TWA) of antimony trisulfide exposure measured in workers was 0.0028 mg/m³. Two workers were excluded from the analysis due to pre-existing medical conditions (cardiovascular disease). Of the remaining 17 workers, ECG abnormalities were found in 41% (seven out of 17: four with QTc prolongation and T-wave abnormalities; two with only T-wave abnormalities; and one with only QTc prolongation). Conclusions: This case report outlines the first few cases in Korea in which potential cardiac toxicity caused by occupational exposure to antimony was identified. However, data regarding cardiac toxicity caused by antimony exposure are still lacking in Korea; thus, additional studies are needed to identify causal relationships.