• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.12
• /
• pp.2059-2064
• /
• 2007

This paper analyzed distribution network reliability related with the increment of outages and duration time according to distribution facilities increasing. KEPCO introduced distribution automation system in 1998 which could recognize outage section by remotely monitoring the fault current and reduce the blackout area by remotely controlling distribution switches. As the result of this outage time reduction using distribution automation system, the minimum distribution automation rate was fined out in this paper on the base of analyzing diverse data and how many switches were used in distribution system to improve distribution network reliability at the situation of distribution facilities increasing. This result can be used as the model that an overseas utility company applies distribution automation system in the future.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.4
• /
• pp.467-473
• /
• 2013

The addition of disconnect switches to a distribution feeder or the replacement of the manual switches with the automatic switches do, in general, increase reliability by decreasing the duration of the outage of many to the customers on the feeder and reducing the outage section. However, the improvement of reliability in power distribution system causes an increase of the investment cost, for example, replacement costs, labor costs, and so on. For this reason - the balance between investment and reliability improvement - many studies about the appropriate level of investment have been conducted. In this paper, we suggest the algorithm for determining the reasonable switch automation rate in the power distribution system. We evaluate the customer interruption cost and reliability for several cases - these cases relate with the switch automation rate - in the domestic metropolitan power distribution system, estimate the effectiveness of changing the manual switch to automatic switch quantitatively. These results can help the determining on the disconnect switch's automation rate.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1318-1321
• /
• 2005

As recently raw water quality has been polluted as well as its quality has been remarkably varied according to season and region, the precise control of coagulant dosage is being keenly required in water treatment plants. The amount of coagulant is closely related to raw water quality such as turbidity, alkalinity, water temperature, pH, electrical conductivity, etc. Since the optimum quantity of chemicals is not yet finalized, so dosage rate must be decided by using jar test that takes one or two hours. Hereupon, the output signal of stream current and multi-regression on historical data were proposed to be applied to the coagulant dosing control. In consequence of applying the scheme to automatic determination of the dosage rate, it was testified that the determination of dosage rate was very effective in case it is performed as to real-time sensing of water quality and the output signal of stream current.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.43-48
• /
• 1992

The automation system oriented as one of the second year automation projects for the small and medium sized enterprises(SME) was developed for the improvement of the production rate and cut the required manpower in the field of the relay which is one of the small electric components used in various industrial fields. The objectives of this study are not only improving the international competition of the relay itself but also partially solving the technical and financial problems featured by common bottlenecks of the SME for efficient assembly automation. For the purpose of these objectives, several topics are studied as followings. - Analyzing the adjustment process and determining the specification of the automation system. - Determining the layout for the automation system to meet the determined specification. - Detail design of the automation system for relay adjustment and inspection. - Control system design - Automation system development and performance test.

• IE interfaces
• /
• v.10 no.1
• /
• pp.209-222
• /
• 1997

The paper provides a methodology to obtain the automaticity indicator of a factory and the sequence of enabling technologies of factory automation. The automaticity indicator is the measure of the current automation status of a factory and can be used as a crucial criteria for the future automation schedule and investment. Although most industries have their own computation methods which usually consider the number of workers in the shop floor, this research covers five evaluation items of automation, such as, production facility, material transfer system, inspection and test system, information system, and flexibility. The detailed evaluation models are developed for each item. Automation sequencing prioritizes the enabling technologies of factory automation on the basis of several criteria which consist of two phases. The first phase includes the automation indicator and the second phase includes six sub-criteria such as production rate, quality, number of workers, capital investment, development duration, development difficulty. For this evaluation, AHP(Analytical Hierarchy Process) is introduced to prevent the decision maker's subject intention. As results of the automaticity indicator and automation sequence, the manager can save time and cost in building constructive and transparent automation plans.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.77-79
• /
• 2000

Industrial communication networks have attracted much attention in the area of decentralized control systems for factory automation and computer integrated manufacturing. In this paper, we investigate the rate-based traffic control of industrial communication networks employing LonWorks to improve the performance measures of throughput, fairness, and error rates. To this end, we utilize the Feedback channel information through the additional network monitoring node and make the overall system closed-loop. We demonstrate the improved performance of the controlled network system by the experimentation upon an implemented lab-scale network system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.04a
• /
• pp.374-379
• /
• 1992

The automation system oriented as one of the second year automation projects for the small and medium sized enterprises(SME) was developed for the improvement of the production rate and cut the required manpower in the field of the relay which is one of the small electric components used in various industrial fields. The objectives of this study are not only improving the international competition of the relay itself but also partially solving the technical and financial porblems featured by common bottlenecks of the SME for effecient assembly automation. For the purpose of these objectives, several topics are studied as followings. -. Analyzing the adjustment process and determining the specification of the automation system. -. Determining the layout for the automation system to meet the determined specification. -. Detail design ofthe automation system for relay adjusment and inspection. -. Control system design. -. Automation system development and performance test.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.64 no.4
• /
• pp.297-302
• /
• 2015

Replacing a manual switch installed in a feeder for a distribution system with an automatic one increases the reliability of the electric power system. This is because the automatic switch can shorten the duration of a fault the customer experiences by splitting the faulty section faster than the manual one does. However, improving the reliability of the distribution system may increase investment costs. Here, the investment costs include automatic switch cost, replacement work cost and labor cost. For this reason, importance should be attached to the proper balance between the increase of the investment costs and the improvement of the reliability of the distribution system. This article analyzed reliability index and economics when manual switches installed in a feeder (RBTS Bus2 model) was replaced by automatic ones. In addition, it attempted to draw the optimum rate of automation of manual switches by automatic ones using the GRG optimization method, considering the current economic requirements.

• International conference on construction engineering and project management
• /
• 2024.07a
• /
• pp.731-737
• /
• 2024

The accident rate in the South Korean construction industry has increased by 50% over the past ten years, reaching seven times the average growth rate of the entire industry. However, the number of management personnel at construction sites is decreasing, making it increasingly difficult to establish a safety monitoring system through professional personnel. This study aims to develop an intelligent control system to address the problem of insufficient management personnel and support the establishment of a continuous safety monitoring system. This system consists of a mobile information collection robot (S-BOT) and an intelligent algorithm. The visual information collected by S-BOT can be analyzed in real-time using computer vision-based intelligent algorithms to detect unsafe situations. The results of this study will contribute to preventing unnecessary social and economic losses by maximizing safety management efficiency and supporting timely decision-making through the sharing of information provided by the intelligent control system.

• 연구논문집
• /
• s.25
• /
• pp.121-128
• /
• 1995

The early day of manufacturing automation systems are NC machine tool Based automation, and now it become FA, DNC, FMC, FMS, CIM and IMS. Manufacturing Automation Technology is applied the increase of all industrial manufacturing competitve power. so the demand of this skill is repidly increase. This Technology can solve lack of manpower, decrease of productivity, and become weakened international competitive. But, automation rate of our country is 30-40%, because the level of domestic technology is low, so we need systemic research of manufacturing automation. The targets of this study are increase the data processing ability of CNC controller, and development of autonomous manufacturing system that can decision making between production module such as setup, manufacturing, inspection and transportation and part that object of manufacturing.