• IE interfaces
• /
• v.16 no.spc
• /
• pp.138-143
• /
• 2003

In this paper, an automated design system for ball-joint parts based on 3-D solid modeler is developed. Parametric modeling and API provided by 3-D solid modeler is engaged to develope the system which consists of four main modules such as : 3-D part modeling, parts assembling, 2-D drafting, and database interfacing modules. The automated design system is implemented on a computer, and shows us that it shorten the design processing time which have taken over 5 hours to only few minutes.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.744-747
• /
• 2008

Quantity information focused on a design drawing plays a critical role in a decision making related to cost for project participants during project life cycles. Related participants absolutely depend on quantity take-off working which produces the quantity information by hand, and then a worker's mistake often causes many errors. The difference of quantity by the know-how of the person in charge of the estimation also occurs. In addition, the worker passes through the whole quantity take-off processes again in case of re-working for quantity take-off produced by a change order. The requirements about the automated estimation increase because of the needs for the accurate quantity take-off and dealing with the change order and recently, the studies about the automated estimation working process based on 34 cad model from 3d cad modeler are attempted in various viewpoints. However, the existing studies reach the limits such as common quantity data type framework for getting Quantity information. Focused on a certain 34 cad modeler and BIM based automation of estimation using it Therefore, the objective of this study is to develop the a series of system which can extract, analyze, and verify Quantity Data Type in modeler to automate quantity take-off originated from various 3d cad modelers as a foundation study for BIM based automation of estimation framework.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.141-144
• /
• 1997

This paper presents design automation system using API and parametric modeling of solid modeler, which is applied on axial fans for cooling towers. The design data including chord length and twist angle according to the fan length are given by design program, and API functions are applied to automate the modeling and assembly process of fan blade. The boss to connect fan and motor is designed with parametric design function provided by UG so as to be flexibly changed by the value of design parameters. The process of generating 2-D drafting for parts and an assembly is also automated. With developed system, the modeling time is reduced to 5 minutes even with unskilled operators.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.352-356
• /
• 2002

In this paper, an automated design system of suspension and steering parts is developed. The system automates the processes of 3-D modeling and 2-D drafting of the parts. In addition, the BOM and dimension data of the designed part is also automatically transferred to the database of ERP system. The system is developed by using the functions of parametric design and API(application Programming Interface) of the a commercial solid modeler.

• International Journal of Control, Automation, and Systems
• /
• v.4 no.1
• /
• pp.63-69
• /
• 2006

Problems like poor security, transfer delay or packet loss occur while building network systems that are applied with TCP/TP integrate with data network systems. To solve this problem, this paper proposes the Separated Ethernet, which can give priority to the system, and by using the OPNET Modeler simulator, we will verify its performances.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.3
• /
• pp.90-99
• /
• 1993

As the finite element method has become a considerable and effective design tool in ship structural analysis, modeling of three dimensional finite element mesh is more necessary than before. However, the unique style and complexity of a ship usually make the modeling be hard and costly. Although most pre-processor of FEM software and geometric modeler provides modeling function, the capability is quite limited for complicated structure. In order to perform FEM modeling quickly, it is necessary to extract, rearrange, and formalize data from ship design database for partially automatic mesh generation. In this paper, the process of designing relational data tables from design data is shown as a part of analysis automation with the application of engineering database concept.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.47-48
• /
• 2015

As the power system develops rapidly into a smarter and more flexible state, so must the communication technologies that support it. Machine to machine (M2M) communication in Smart Grid environment has been discussed in European Telecommunications Standards Institute (ETSI). The power system is not easily replaceable, due to system replacement cost. The M2M gateway is required in other to improve interoperability in M2M environment. The Distributed Network Protocol 3.0 (DNP3.0) is the most important standard in the SCADA systems for the power. It has been used for device data collection/control in Substation Systems, Distribution Automation System. If the DNP3.0 data model is combined with a set of contemporary web protocols, it can result in a major shift. We selected Constrained Application Protocol (CoAP) based on RESTful as M2M protocol. It is a specialized web transfer protocol for use with constrained nodes and constrained networks. We have used the OPNET Modeler 17.1 in order to verity the SOAP versus CoAP. In this paper, we propose the CoAP-based M2M Gateway to Distribution Automation system using DNP3.0 in Smart Grid Environment.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.718-723
• /
• 2005

In this paper, we propose the collaborative design system with which we can simultaneously modify the actual 3D CAD model by the remote control and have interaction on it. It enables instantaneous decision making among the multiple disciplines in distributed locations using the function of simultaneous access and video conference. It also provides the method of managing the consistency between design entities. This system consists of Collaborative Management Server, File Server, Solid Modeler Client, Remote Control Module and Client Module.

• Journal of Information Technology Applications and Management
• /
• v.16 no.4
• /
• pp.263-283
• /
• 2009

Although some CASE tools supported conceptual data design, they required for users too much preliminary knowledge to learn how to use and handle them. In addition, in a number of studies on conceptual data design with natural language, they claimed passive participation for users with conforming to messages predefined by CASE tools. As an alternative to these traditional CASE tools, we proposed an ERD formulator for automated data design tool, called ERDF, so that even ordinary users, not necessarily data modeler, are capable of formulating ERD on business requirements by use of ERDF. We, first of all, introduced NSM as the standard methodology. We also designed the structure of ERDF including main controller, input controller, operation controller, regulation controller, schema controller, and output controller. We then defined conceptual domains and basic operations to lay down schema operations as well as sentence rules to handle input sentence in natural language. To get an ERD that is faithful to business requirements, we laid out supplementary design for dialogue and confirmation of soundness and completion.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.1 no.1
• /
• pp.33-51
• /
• 2007

There are two newly emerging research issues in the enterprise information systems literature. One is the scalability issue for rapidly increasing choreographic volumes between interrelated organizations. The other is the business intelligence issue for traceable and monitorable business processes and services interchanging e-Business data and applications across organizations. Based upon these emerging issues, through a functional extension of the ebXML technology we have developed a process-driven e- Business service integration (BSI) system, which is named ‘e-Lollapalooza’. It consists of three major components ? the Choreography Modeler coping with the processdriven collaboration issue, the Runtime & Monitoring Client for coping with the business intelligence issue and the EJB-based BSI Engine coping with the scalability issue. This paper particularly focuses on the e-Lollapalooza’s development aspects for supporting the ebXML-based choreography and orchestration among the engaged organizations in a process-driven multiparty collaboration for e-Logistics and e- Commerce services. Here, it is fully deployed in an EJB-based middleware computing environment for e-Logistics process automation and B2B choreography.