• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.90-94
• /
• 2003

For the structure of VMS is required to the maritime MDT for realtime acquisition the position reporting of navigating ships. The first study is the recording method a navigating data by GPS, the 2th is SSB modem for data trans-receiver by use ship. And then the communication protocol of automatic traffic for in continues transmission a ship's ID, time and position data of GPS. In this paper have studied the SSB modem for transmission the voice and data at same time. Which is adapted to the communication control unit, protocol of data traffic and acquisition, displayer of character data. This maritime GPS MDT is considered to low-cost type by using microprocessor.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.184-184
• /
• 2012

We proposed a new measurement method of cutoff probe using the reactance spectrum of the plasma in cutoff probe system instead of transmission spectrum. The high accurate reactance spectrum of the plasma which is expected in previous circuit simulation of cutoff probe [1] was measured by using the automatic port extension method of the network analyzer. The measured reactance spectrum is good agreement with E/M wave simulation result (CST Microwave Studio). From the analysis of the measured reactance spectrum based on the circuit modeling, not only the electron density but also electron-neutral collision frequency can be simply obtained. The obtained results of electron density and e-n collision frequency were presented and discussed in wide range of experimental conditions, together with comparison result with previous methods (a previous cutoff probe using transmission spectrum and a single langmuir probe).

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.6
• /
• pp.69-76
• /
• 2013

This paper presents the development of the FCF method for the manufacturing of final products using numbers related to the minimum amount of work. The utilized product is a drum clutch, which is part of the transmission of an automobile. A double acting press is secured first and a prediction of the forming load on the practical material is made through an experiment with a plasticine model. Also, a finite element simulation using product shape and properties is performed, as well as a press experiment. A double acting press is manufactured that is suitable for a double acting experiment with a conventional hydraulic press(200 tons). A peripheral device for the press is additionally designed for experimental purposes. And, the press has as its essential points the drive speed, stroke control, etc., all of which influence the forming and is modified. Especially, a laser system is used for velocity measurement of two punches. The forming load of a practical material is predicted in order to derive a forming load formula for cold conditions on the basis of approximate similarity theory. Finite element analysis of the relative velocity ratio(RVR), etc., for most suitable flow defect(unfilling, etc.) prevention is achieved as well. The results are verified through a press experiment.

• Journal of Navigation and Port Research
• /
• v.44 no.2
• /
• pp.136-143
• /
• 2020

Maritime autonomous surface ships (MASS) has been developed over the years. But, there are many unresolved problems. To overcome these problems, this study proposes connected ship navigation system. The system comprises a slave ship and a master ship that leads the slave ship. To implement this system, communication network, route planning algorithms, and controllers are designed. The communication network is built using the transmission control protocol/Internet protocol (TCP/IP) socket communication method to exchange data between ships. The route planning algorithms calculate the course and distance of the slave ship using the middle latitude sailing method. Nomoto model is used as the mathematical model of the slave ship maneuvering motion. Then, the autoregressive with exogenous variables (ARX) model is used to estimate the parameters of Nomoto model. Based on the above model, the automatic steering controller is designed using a proportional-derivative (PD) control. Also, the speed controller is designed for the slave ship to maintain constant distance from the master ship. Sea experiments are conducted to verify the proposed system with two remodeled boats.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.4
• /
• pp.733-738
• /
• 2005

The distress communication system in the maritime mobile service had almost depended on the wireless telephony or telegraphy technique. The GMDSS (Global Maritime Distress and Safety System) which was introduced in 1992 brought a lot of changes in the maritime distress communication service such as the automatic transmission of distress signals and implementation of global search and rescue networks. However, there are some deficiencies in the GMDSS distress communication system such as a lack of compatibility in the maritime distress communication between CMDSS ships and Non-GMDSS ships, increasing deceptive or false distress alerts generated by GMDSS installations, lack of understanding about the CMDSS installations for the operators. In this paper, the problems of distress communication system in the maritime mobile service are analyzed and the methods to solve or minimize these problems are suggested.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.213-216
• /
• 2005

The distress communication system in the maritime mobile service had almost depended on the wireless telephony or telegraphy technique. The GMDSS (Global Maritime Distress and Safety System) which was introduced in 1992 brought a lot of changes in the maritime distress communication service such as the automatic transmission of distress signals and implementation of global search and rescue networks. However, there are some deficiencies in the GMDSS distress communication system such as a lack of compatibility in the maritime distress communication between GMDSS ships and Non-GMDSS ships, increasing deceptive or false distress alerts generated by GMDSS installations, lack of understanding about the GMDSS installations for the operators. In this paper, the problems of distress communication system in the maritime mobile service are analyzed and the methods to solve or minimize these problems are suggested.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.402-403
• /
• 2014

Micro-magnetic detection system is used to detect small particles in an automatic transmission valve body, which signal noise and time-delay may occurs in process of signal transmitting and filtering. In this paper, we present the design and implement of a micro-magnetic detection system based on wireless sensor networks. Micro-magnetic detection system consists of five modules which are magnetic sensor detector, signal processing unit, wireless sensor networks, system control unit and system monitoring unit. The experimental results show that signal noise and time-delay decreased.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.5
• /
• pp.95-103
• /
• 1996

This paper describes a computer aided design system for spur and helical gears. To establish the appropriate program, an integrate approach based on a rule-base system was adopted. This system is implemented on the personal computer and its environment is a commercial CAD package called AutoCAD. This system includes a main program and five sub-modules such as data input module, tooth profile drawing module, strength calculation module, and drawing edit module. In the main program, all the sub-modules are loaded and the type of gear and tooth profile are selected. In the data input module, the variables which are necessary to the design of gear are selected from the database. In the drawing module, from the calculated results, the required gear tooth is produced on the screen. The developed system that aids gear designer provides powerful capabilities for gear design.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.933-939
• /
• 2010

Gathering information and systemization of infrastructure disaster management is to reduce uncertainties in making decisions and maximize the number of alternations for reasonable decision making. The key object is the progress report & propagation automation system based on sensors, which is major for providing objective data to realize and support decision makings and delivering decision to a certain area, department, manager and other people rapidly. Collecting, reviewing and database of existing progress report & propagation manual in order to achieve networking of safety management on major social infrastructure of the nation, materialization of field-oriented intelligent business process by developing mobile safety management command transmission device and integrating it into facility safety management network.

• Current Optics and Photonics
• /
• v.1 no.3
• /
• pp.196-202
• /
• 2017

Corona discharge is always a sign of failure processes of high-voltage electrical apparatus, including those utilized in electric railway systems. Solar-blind ultraviolet (UV) cameras are effective tools for corona inspection. In this work, we present an automatic railway corona-discharge detection system based on solar-blind ultraviolet detection. The UV camera, mounted on top of a train, inspects the electrical apparatus, including transmission lines and insulators, along the railway during fast cruising of the train. An algorithm based on the Hough transform is proposed for distinguishing the emitting objects (corona discharge) from the noise. The detection system can report the suspected corona discharge in real time during fast cruises. An experiment was carried out during a routine inspection of railway apparatus in Xinjiang Province, China. Several corona-discharge points were found along the railway. The false-alarm rate was controlled to less than one time per hour during this inspection.