• 전기학회논문지
• /
• 제58권6호
• /
• pp.1116-1122
• /
• 2009

ATS(Automatic Train Stop) system makes train stop when it runs over the speed limit and ensure the safe operation of train. Seoul Metro line 2 in Korea, which started its passenger service in 1982, has adopted ATS system for its signaling system. The ATS system has only a train stop function at the time of emergency, and Seoul Metro is planning to replaced them with ATC(Automatic Train Control)/ATO(Automatic Train Operation) system which can provide the dedicated speed control for headway reduction and automatic operation of train. Until all the ATS system is replaced with the new ATC system, both systems are to operate simultaneously at the same metro line. In this situation, ATS system sometimes reveals improper operation: train stops suddenly without any obstacles in front of it. These emergency stops cause interruption of passenger service, and abnormal abrasion of wheels and rail. This paper makes it clear that these interruptions are caused by EMI phenomena between ATS on-board device and ATC wayside device : Signal current flowing in AF track circuit of ATC is turn out to be a EMI source that prevent normal operation of the ATS on-board device. Although the two systems have different frequency-ranges (ATS system has frequency range between $78{\sim}130$[kHz] and ATC system has frequency range between $9.5{\sim}16.5$[kHz]), it turned out that EMI phenomena appears between the both systems. This is investigated by measuring the output signal from ATS on-board device passing over ATC wayside device. The FFT(Fast Fourier Transform) analysis of the signal reveals that AF track circuit signal is transmitted to the ATS on-board device and induce noise causing improper operation. The countermeasures to the EMI phenomena are examined in three ways; blocking EMI transmission, enforcement of EMS (Electromagnetic Susceptibility) of ATS on-board device, and blocking the EMI source. It is suggested that the practical solution be blocking EMI source temporarily, that is breaking AF track circuit signal when the trains with ATS on-board device pass over it. To this purpose, TODS(Train Occupation Detection System) is developed, and has made a success in preventing the EMI problem of Seoul Metro line 2.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2001년도 Proceeding of KIN-CIN Joint Symposium 2001 on Satellite Navigation/AIS, lntelligence , Computer Based Marine Simulation System and VDR
• /
• pp.19-25
• /
• 2001

At present the identification of vessels is still depending on the OOW (Officer Of Wateh) in VTS (Vessel Traffic Service), which is completed by radar, and also by the combination of VHF radio and VHF direction finder. However, with the development of port transportation and economic, this conventional way of identification can't satisfy more and more request for the information that the VTS needs from the vessels. In such a case, the AIS(Automatic Identification System) precept which is based on STDMA (Self-organized Time Division Multiple Access) technique is put forward by IMO (International Maritime Organization). AIS can automatically provide the information, including own ship's identification, type, position, course, speed, and other information to the appropriately equipped coast station and other ships. At the same time it can also automatically monitor and track the nearby ships similarly fitted with AIS. On the basis of describing the whole comprising and the format of transmission information of AIS, this paper mainly studies the key communication techniques in AIS, such as STDMA protocol, net synchronization and GMSK(Gaussian Minimum Shift Keying)technique, and so on. At last this paper briefly introduces the recommendation decided by IMO on forcing the sea-going ships to fixed with AIS equipments, and it continuos with the unexploited potential of AIS if it applies in VTS.

• 한국산학기술학회논문지
• /
• 제8권6호
• /
• pp.1402-1409
• /
• 2007

본 논문에서는 시스템 구현에 직접적으로 사용될 수 있는 직교 주파수 분할 다중화 (OFDM : Orthogonal Frequency Division Multiplexing) 통신 시스템을 위한 여러 가지 자동 이득 제어 (AGC : Automatic Gain Control) 알고리듬을 제안하고자 한다. 본 논문에서는 고속 패킷 전송을 위하여 비교적 많은 샘플 수를 갖고 긴 길이의 프리앰블을 반복적으로 사용하는 초 광대역 통신 (UWB : Ultra-Wideband)과 같은 OFDM 시스템의 디지털 수신 신호를 가정한다. 이러한 OFDM 시스템에서는 프리앰블 신호를 아날로그-디지털 변환기 (ADC : Analog-to-Digital Converter)를 통해 디지털 수신 신호로 변환한 후 최대 샘플 값 계수기내 버퍼의 길이만큼 디지털 수신 신호를 저장한다. 이 후 버퍼에 저장된 디지털 수신 신호 중 최대 샘플의 개수를 계산하고 이득 조절 신호 발생기에 저장된 이득 조절 테이블에 따라 이득을 조절하여 ADC 입력단의 전력 레벨을 자동으로 조절한다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2022년도 춘계학술대회
• /
• pp.150-154
• /
• 2022

선박의 항적 및 선박 간 충돌 가능성을 평가하기 위해 선박자동식별시스템(AIS)이 중요하게 활용되고 있다. 하지만 전송 주기에 대한 한계로 인해 실시간 정보 제공이 어렵다. 이를 개선하기 위한 대부분의 연구는 이상적인 데이터를 기반으로 진행되어, 실제 상황에 대응하기 어려운 문제가 있다. 따라서 본 논문에서는 실상황에서의 실시간 정보 제공을 위해서, 항적의 유형에 따라 선회각을 반영한 이산 칼만 필터 기반 위치 추정 방법을 제안한다. 또, 실제 데이터를 사용한 실험을 통해서 제안 알고리즘에 대한 정확도 평가를 진행한다.

• 대한기계학회논문집
• /
• 제19권1호
• /
• pp.132-141
• /
• 1995

The torque converter, an important component of automatic transmissions, is a hydrodynamic device which has a great influence on transient characteristics of vehicle during shift. To predict the accurate driving performance in extremely transient state such as shifting process, a detailed analysis of the torque converter is required. In this study, one dimensional performance model of the torque converter based on the concept of mean flow path, was used to analyze the shifting transients and the exact values of equivalent parameters were determined from the experimental results by using BOX program. The dynamic modelings of the components of power transmission systems such as engines, planetary gear systems, clutches and one-way clutches, were carried out. To analyze the shifting transients of tracked vehicle, a simulation program was developed. In the modeling of power transmission systems, the stiffness of shafts was neglected and shifting control logic(TCU) was included. Using the developed simulation program, the driving conditions were simulated and the results of simulation were verified through the experiments on the dynamometer.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전력기술부문
• /
• pp.164-166
• /
• 2006

Wien Automatic System Planning Package (WASP) which is used to draw out generation expansion planning applies Dynamic Programming in Korea power system panning. While this package has an advantage that computes annual capacity, it has a disadvantage that can't consider environmental constraints. With the effectuation of the Kyoto Protocol in February, 2005, it is expected that CO2 emission has a severe effect on Korean power system. Therefore, as the most important issue, the generation expansion planning considering environmental constraints is rising in power system. This paper develops a mathematic model including not only generation expansion planning but transmission planning and considering regional supply-demand and environmental constraints, especially CO2 emission, and verifies propriety through the case study.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.684-689
• /
• 2000

In this paper, the equations of motion about vehicle, powertrain and brake system were derived. The vehicle has eight degrees of freedom with nonlinear tire model and the powertrain has two degrees of freedom containing engine, torque converter and four speed automatic transmission. The brake system has two states about front and rear brake line pressures. The transient tire model with first order time lag is also subjoined for low speed or stop-and-go simulation. The modeling was derived considering two points - the fidelity and the simplicity. The simulation using this model is similar with real vehicle dynamic behavior and the model is made as simple as possible far fast simulation. It is validated that the derived vehicle model can be applicable to the real time simulation.

• 한국기계가공학회지
• /
• 제17권5호
• /
• pp.30-36
• /
• 2018

Automotive fuel efficiency regulations and air pollution control are hot issues of recent years in the automotive industry. To solve these regulation problems, many studies are continuing to improve the transmission efficiency of transmissions. Tapered roller bearings are useful to improve the transmission efficiency in the recent automobile parts. The frictional losses in the tapered roller bearings are mainly composed of the rolling friction and the sliding friction, and are dependent upon the load, the lubrication, the rotation speed of bearings, and etc. In this paper, the operating conditions of the transmission are defined and then the power losses of each bearing are calculated. In addition, improvement options are suggested after identifying the design factors influenced much by the improvement effect of power loss under the operating conditions of each bearing. We compare the power losses of the entire transmission system due to bearing improvements by comparing the friction losses between the original design and the improved design. Lastly, it is shown that the calculated power losses are valid by comparing the test values and the theoretical values for the frictional torque characteristics of the original and improved bearings.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제18권2호
• /
• pp.511-527
• /
• 2024

This paper proposes a block-based self-organizing time-division multiple access (BSO-TDMA) protocol for very high frequency (VHF) data exchange system (VDES) in shipborne ad-hoc networks (SANETs). The BSO-TDMA reduces the collisions caused by the simultaneous transmission of automatic identification system (AIS) messages by uniformly allocating channel resources using a block-wise frame. For this purpose, the BSO-TDMA includes two functional operations: (1) frame configuration and (2) slot allocation. The first operation consists of block division and block selection. A frame is divided into multiple blocks, each consisting of fixed-size subblocks, by using the reporting interval (RI) of the ship. Then, the ship selects one of the subblocks within a block by considering the number of occupied slots for each subblock. The second operation allocates the slots within the selected subblock for transmitting AIS messages. First, one of the unoccupied slots within the selected subblock is allocated for the periodic transmission of position reports. Next, to transmit various types of AIS messages, an unoccupied slot is randomly selected from candidate slots located around the previously allocated slot. Experimental simulations are conducted to evaluate the performance of BSO-TDMA. The results show that BSO-TDMA has better performance than that of the existing SOTDMA.

• 항공우주시스템공학회지
• /
• 제13권5호
• /
• pp.87-93
• /
• 2019

본 연구에서는 육상이나 해상에서 헬리콥터와 HF 무전기로 장거리 통신을 할 때 교신이 가능한 최적의 주파수를 자동으로 찾아주는 주파수 자동탐색 시스템(ALE)을 개발하였다. LOS(가시거리) 미확보 또는 35 NM 이상의 장거리 통신 시에는 송신출력 감소와 다양하고 강한 RF 환경 노이즈 신호로 인하여 수동방식으로 주파수를 선택할 경우 통신 성공률이 현저히 낮아진다. 본 논문에서는 LOS 미확보 환경에서 장거리 통신 시, 수동방식으로 주파수를 선택할 때 발생하는 최적 주파수 선택의 어려움을 극복하고자 한다. 주파수 분석 Propagation 소프트웨어를 기반으로 주파수 자동탐색 시스템을 구성하였으며 이 시스템의 적용으로 통신 성공률이 증가됨을 확인하였다. 또한 주파수 자동탐색 시스템을 헬리콥터에 적용하여 지상시험 및 비행시험을 수행한 결과 제안한 주파수 자동탐색 시스템의 우수성 및 효율성을 입증하였다.