• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1073-1078
• /
• 2008

This paper is mainly concerned with the characteristics of precision stop on the automatic operating for the train car. Recently, the automatic operation of train car and the PSD establishment inside the subway are magnified. Consequently, the importance and necessity of characteristic of train car precision position stop are augmented. It researches the characteristic of precision position stop when the train car is operated with automatically and plans the safe operation of train car and the method of maintenance which is rational.

• 전기학회논문지
• /
• 제67권1호
• /
• pp.61-67
• /
• 2018

Automatic Train Stop (ATS) is a device that automatically stops or decelerates a train when the train exceeds the permitted speed limits or violates the signal regulations. The railway signaling system has been evolved to an automatic train control system (ATC), and is being developed into Distance-to-Go and Communication Based on Train Control (CBTC). In spite of that, the ATS system is currently being operated in Seoul Metro (line 1 and 2) and most of railway lines in Korea as well as overseas. In this study, we presents the technical methodology to prevent human errors in order to secure the safety in operation of the ATS system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.810-813
• /
• 2003

The present headway on KNR(Korea National Railway) lines varies from 6 to 10 minutes depending on the each line and by the operation of High Speed line in 2004, the bottleneck would be expected within a few sections such as Daejeon-Daejeon shunting yard which will be the common mute between KTX(Korea Train Express) and conventional trains. Therefore, KNR would like to reduce the headway of the all lines by 4 minutes with the implementation of ERTMS/ETCS on-board system. Where ETCS(European Train Control system), the subsystem of ERTMS, is Automatic Train Protection system for safety train running. This study will be analyze expected braking distance and running time depending on characteristics of conventional passenger and freight trains and high speed train will be operated within electrified conventional line for comparing the headways of ATS(Automatic Train Stop) system and ETRMS/ETCS system within the Daejeon-Daejeon shunting yard section.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 D
• /
• pp.2164-2166
• /
• 2003

An automatic operation of train is executed by an automatic train operation(ATO) system. The main function of ATO system is to control train speed. So it makes the train stop at the programmed position accurately and improve riding comfort. In this paper, A fuzzy control is designed for speed control. The simulation is executed for verifying the speed control performance of the fuzzy system and comparing with that of the conventional PI.

• 전기학회논문지
• /
• 제63권8호
• /
• pp.1064-1069
• /
• 2014

The railway signalling system plays an essential role in the headway and routing control for a safe and efficient train operation. The reliable and safe operation of the system is very important because the failure of the railway signalling system can lead to the collision, derailment, or unexpected stop of a train. So far, the conventional wayside signal mode (ATS: Automatic Train Stop) has been generally used as the railway signalling system. However, this system is highly linked to a risk of major accidents resulted from human mistakes such as missing a signal or careless control of train speed. Accordingly, the onboard signal mode (ATC: Automatic Train Control) as an alternative of ATS has been recently introduced and applied to transmit effectively the information on speed control of a train by using computers and communication equipment. In the process of replacing the obsolete signal system, it is necessary to switch over the system while providing passengers with normal services. Therefore, the integration of a railway signaling system compatible for both ATS and ATC and its interface is discussed in this study. In particular, the implementation scenario required for operation planning of the integrated system was designed, and the results as well as effects of its applicability test were also presented.

• 한국산학기술학회논문지
• /
• 제17권10호
• /
• pp.702-708
• /
• 2016

철도 신호시스템은 철도의 건설 운영 경험을 토대로 안전성 및 유지보수성을 극대화할 수 있도록 발전해 왔다. 전기적으로 궤도를 일정구간별로 구분하여 제어하는 폐색기반의 차량간격 제어를 통해 시스템의 안정적인 운영을 도모함과 동시에 효율적인 운영을 위한 시스템의 모니터링 강화가 지속적으로 이루어 졌다. 운영환경의 변화에 맞게, 기존의 ATS(Automatic Train Stop) 시스템과 새로운 ATP/ATO(Automatic Train Protection/Automatic Train Operation) 시스템이 병행으로 운영 중에 있다. 신호시스템을 병행 운영함에 있어서, 기존 ATS시스템은 잦은 신호설비의 개량으로 인해 연동도표 및 로직의 조건에 대한 보완이 필요하게 되었다. 본 논문에서는 이종 신호시스템 중 기존 ATS시스템의 연동조건 및 보안개선을 통해 시스템 안전성 및 운영 효율성을 도모하였다. 신호기 ON/OFF으로 반대선 신호에 영향을 주지 않도록 신호현시의 점유조건이 추가되었으며, 위치 및 쇄정에 대한 추가적 변경으로 보안성을 향상시켰다. 또한 불필요한 조건을 삭제하고 세분화된 신호현시를 생성하여 열차의 접근성을 향상시켜 운영 효율성을 향상시켰으며, 한층 강화된 시스템으로 운영할 수 있도록 개선하였다. 이와 같은 활동을 통행 기존 ATS시스템의 잦은 신호설비의 개량으로 인한 연동도표 표기와 관련한 보완사항을 개선하였으며, 열차의 안전운행과 밀접한 보안도 향상측면에 있어서의 뚜렷한 효과를 얻었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 춘계학술대회 논문집
• /
• pp.251-258
• /
• 1999

This paper is mainly concerned with the development of the ATO(Automatic Train Operation) profile on precision stop controller. The ATO system is used for automatic or driverless operation of a train. In this paper, the algorithm for ATO controller is presented and three speed profiles on precision stop controller are compared. One profile is based on the maximum jerk control, another on the constant control input, and the third on the optimal control for the minimum energy consumption. These profiles are simulated and analyzed in view of the stop time, control input, jerk, propulsion and braking.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 춘계학술대회 논문집
• /
• pp.267-274
• /
• 1999

This paper is mainly concerned with the development of the ATO(Automatic Train Operation) System. The ATO system is used for automatic or driverless operation of a train using various informations from TCMS, ATC, TWC. In this paper, the general architecture of the ATO system, implementation of ATO application software and the algorithm using servo-controller for automatic train speed restriction/regulation is presented.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.228-230
• /
• 2006

While trains perform a complete precision stopping control at stop point, it is essential to keep better commuters comfort in prompt. Because a train's brake force tends to increase a brake effort in a low speed and a low brake effort, a brake force in motor cars must be increased to keep better passenger comfort, to control the special braking qua1ities and to prevent the impact of the automatic coupler rather than trailer's, Rail cars must have a special braking process for the train stopping control. In the train stop mode, the train stopping control is designed to start at 20km/h. It starts by Dynamic brake blending, and then finally stops by only the friction. If these process are not exactly activated, the train may fail a complete precision stop. In this report, it studied the electric and friction brake processing during the precious stopping control. To achieve exact test results, the speed reference has to be reduced the calculated difference. In the precision stopping control. the ways of the keeping brake force in motor car was analyzed and some solutions of controling air pressure was brought up by means of direct test in main line, This study was based on line 5 in Seoul Metropolitan subway.

• 한국도시철도학회논문집
• /
• 제6권4호
• /
• pp.363-372
• /
• 2018

열차제어시스템의 기능 및 성능 검증을 위해 실제 열차 시험의 전 단계로 시뮬레이터를 이용하는데 이 경우 시뮬레이션 결과가 실제 시험과 얼마나 부합하는 지가 중요하다. 본 논문에서는 열차제어시스템 중 열차자동운전을 담당하는 ATO용 시뮬레이터에 대한 내용을 기술한다. ATO 관점에서 시뮬레이터와의 연결이 실제 열차와의 연결과 동일하도록 시뮬레이터에 실제 열차와 동일한 인터페이스를 구현하여 ATO와 통신하도록 하였다. 또한 시험으로 열차의 특성을 파악하여 열차 모델에 적용함으로써 열차 가감속 명령에 대한 시뮬레이션 상 열차의 반응이 실제와 유사하게 나타나도록 하였다. 시뮬레이션으로 수행한 정차 제어 시험 결과와 실제 본선 시운전 시험 결과를 보임으로써 본 연구에서 도출한 모델의 충실성과 시뮬레이터의 우수성을 보인다.