• 제목/요약/키워드: Automatic switching

검색결과 139건 처리시간 0.032초

블라인드 등화 알고리즘의 초기 수렴 자동 검출 기법 (Initial Convergence Detection of Blind Equalization Algorithm Automatically)

  • 최익현;김철민;최수철;오길남
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
    • /
    • pp.445-447
    • /
    • 2005
  • MCMA(modified constant modulus algorithm) accomplishes blind equalization and carrier phase recovery simultaneously. But, the error level of MCMA is not zero when the equalizer converges completely. Because the MCMA uses a special signal point instead of a original signal point. MCMA-DO(decision-directed) improves the steady-state performance but the performance of equalizer is decided by switching time between the MCMA and the DD. In this paper, according to the residual ISI(intersymbol interference) of the equalizer output, the most suitable switching time is decided automatically.

  • PDF

상관된 페이딩 채널에서 하이브리드 ARQ를 사용하는 V-BLAST 시스템의 수율 (Throughput of V-BLAST System using Hybrid ARQ in Correlated Fading Channels)

  • 김봉회;황승훈
    • 대한전자공학회논문지TC
    • /
    • 제45권1호
    • /
    • pp.66-71
    • /
    • 2008
  • 본 논문에서는 H-ARQ를 위한 NACK 신호를 이용한 안테나 스위칭 방식을 제안하고 V-BLAST 시스템에서 분석하였다. 여기서 전송 안테나는 재전송시 번갈아 스위칭 되어 동작한다. 상관된 페이딩 채널에서 제안된 방식의 채널 용량을 해석적으로 분석함으로써, 채널 상관성의 악영향이 안테나 스위칭 방식으로 줄어듦을 보인다. 시뮬레이션 결과를 통해 상관된 페이딩 채널에서 평균 수율은 큰 복잡도의 증가 없이 개선되어질 수 있음을 보인다.

구동 신호 Phasor 제어형 SIT 고주파 공진 인버터 (Drive Signal Phasor Control-Based High Frequency Resonant Inverter Using Power-SIT)

  • 김동희;노채균;김종해;정원영
    • 조명전기설비학회논문지
    • /
    • 제12권1호
    • /
    • pp.51-57
    • /
    • 1998
  • 본 논문은 구동신호 위상제어 기능을 갖는 SIT고주파공진 인버터를 제안하였다. SIT를 이용한 위상제어형인버터는 낮은 스위칭 손실로서 높은 스위칭 주파수의 전력변환을 실현시킬 수 있다. 특히 2단위 인버터의 출력전압을 직렬로 연결하여 높은 출력을 얻을 수 있다. 과전류에 대해서 보호회로를 이용한 시스템의 안정성과 그리고 PLL에 의해 부하변화에 따른 자동추종제어를 실현하였다. 특히 제안된 인버터는 고주파에서도 거의 정현파에 가까우며, 스위칭 주파수 범위는 180∼220〔kHz〕이고, 2〔kW〕의 유도가열에 응용하였다. 본 인버터의 동작 특성에 대해서 이론과 실험결과를 비교 검토하였다.

  • PDF

팜봇과 연동하는 작업기 자동체결 장치 개발 (Development of Automatic Module Changer for Farmbot)

  • 권준혁;이명호;조형호;홍형길;조용준;윤해룡;오장석;박희창;강민수
    • 한국기계가공학회지
    • /
    • 제20권12호
    • /
    • pp.30-35
    • /
    • 2021
  • In this study, we developed an automatic module changer for agricultural implements for using in unmanned agricultural robots. An automatic module changer is attached by lowering from the top to bottom of the implements and fixing the four fastener bars attached to the implements in combination. The lift function was implemented using seesaw-type structures to keep the engagement point constant when the automatic module changer climbs and descends, and the switching function of the automatic module changer was implemented using the link device in the cam structure. We developed an algorithm to check the presence of attachment and opening/closing of the workpiece using limit switches and verified the performance through combination assessment and weight lift test to assess whether the combination was within the error range.

광 인터넷 표준화 동향

  • 최준균;이규명
    • 정보와 통신
    • /
    • 제18권11호
    • /
    • pp.33-43
    • /
    • 2001
  • 본 고에서는 광인터넷에 대하여 현재까지 IETE, ITU-T 및 OIF(Optical Internet Forum)을 중심으로 최근에 활발하게 추진되고 있는 표준화 동향을 살펴본다. 특히 광을 기반으로 MPLS(Milti-Protocol Label Switching) 기술을 적용하려는 Generalized MPLS 기술을 중심으로 분석한다. 먼저 IETE에서 MPLS 기술을 중심으로 분석하다 먼저 IETF에서 MPLS WG에서 기본 MPLS 기술에 대한 표준을 지속적으로 작업하고 있으며 여기에서의얻은 기술을 바탕으로 IPO Wg과 CCAMP WG 등에서 광 네트워크 구조를 제안하고 있으며 여기에 새로운 시그널링과 계층적 경로 설정 메커니즘 및 신뢰성 있는 보호/복구 등의 부가적이 기능들을 추가하기 위한 작업을 하고 있다 또한 OIF 에서는 UNI 신호 규격을 정하고 있으며 ITU-T에서 광 전달 네트워크 (OTN)와 관련하여 ASTN/ASON(Automatic Switched Transport Network/Automatic Switched Optical Network)을 포함하여 광 네트워크에 대한 구조적 측면뿐만 아니라 전송 및 망 관리 측면에 대학 규격을 제정 중에 있다.

  • PDF

Automatic frequency Control Current-Source Inverter for Forging Application

  • Chudjuarjeen, Saichol;Koompai, Chayant;Monyakul, Veerapol
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2004년도 ICCAS
    • /
    • pp.238-242
    • /
    • 2004
  • The paper describes an automatic frequency control current-fed inverter for forging applications. The IGBT in series with diodes as its switching devices in the inverter circuit which is of full-bridge type. The operating frequency is automatically tracked to maintain a small constant leading phase angle when load parameters change. The load voltage is controlled to protect the switches. The output power can be adjusted by varying the input current from phase controlled rectifiers which is a part of current source. The system has been operated at 15-17 kHz. The output power transferred to the load is 1,595 watts. It can heat the steel work pieces with 15 mm diameter and 120 mm long from room temperature to approximately 1100 $^{\circ}C$ within 20 seconds with 0.97 leading power factor on the input side.

  • PDF

Development of High Efficiency Boost DC/DC Converter For EV

  • Song, Sung-Geon;Lee, Sang-Hun;Song, Hyun-Jig;Park, Seong-Mi
    • Journal of international Conference on Electrical Machines and Systems
    • /
    • 제3권4호
    • /
    • pp.415-421
    • /
    • 2014
  • In this paper, reactorless high efficiency boost DC/DC converter for EV is proposed. In proposed converter, improves efficiency because decrease power loss when the switches are turned on/off using zero current switching (ZCS) at all switch of primary full bridge. By replacing reactance ingredients of L-C resonance circuit for ZCS with leakage inductance ingredients of high frequency transformer, it reduces system size and expense because of not add special reactor. For validity verification of proposed converter, in the paper implements simulation using PSIM and perform experiment by making 5KW DC/DC converter. In experimental results, efficiency of proposed converter conformed superiority.

CTTS의 비동기 절체 시 조속기 제어를 통한 과도 개선에 관한 연구 (Study on Transient Improvement through Governor Control under Asynchronous Transition of CTTS)

  • 강병욱;채희석;한운기;임현성;권승옥;김재철
    • 조명전기설비학회논문지
    • /
    • 제29권11호
    • /
    • pp.47-52
    • /
    • 2015
  • This paper derives the problems that occur when asynchronous transfer in case of phase, frequency, voltage between the emergency generator and the grid and proposed the countermeasure to solve this problem when the transfer switch replace ATS(Automatic Transfer Switch) with CTTS(Closed Transition Transfer Switch) for the non-interrupting switching. In order to simulate above cases, modelling was used the transient analysis program PSCAD/EMTDC. By using this, the customer installed emergency generator and the grid was implemented. We compared three cases of asynchronous transition based on the basic case and proposed improvement by controlling the governor of emergency generator.

저전력 소모 임베디드 프로세서 코어 자동생성 시스템의 설계 (Design of an Automatic Generation System for Embedded Processor Cores with Minimal Power Consumption)

  • 김동원;황선영
    • 한국통신학회논문지
    • /
    • 제32권10C호
    • /
    • pp.1042-1050
    • /
    • 2007
  • 본 논문은 머신 기술 언어를 이용하여 전력 소모가 최소화된 임베디드 코어 자동 생성 시스템의 설계에 대해 기술한다. 머신 기술 언어를 사용하여 어플리케이션에 적합한 임베디드 코어를 빠른 시간에 설계하기 위해 어플리케이션 실행시 동적 전력 소모가 최소화된 코어를 생성하는 시스템을 구축하였다. 제안된 시스템은 각 인스트럭션의 파이프라인 스테이지의 행위 정보로부터 파이프라인 해저드를 찾아내며 처리하는 능력을 가진 임베디드 코어를 생성한다. 생성된 코어는 파워 소모가 최소화되게 만들어져 있다. 자동 생성 시스템의 검증을 위해 ARM9, MIPS R3000에 대해 SMDL로 기술하고 전력 최적화 과정을 거쳐 HDL 코드를 자동 생성하였으며, 어플리케이션에 대해 시뮬레이션을 수행하여 소모되는 전력을 측정하였다. 실험 결과로 생성된 프로세서는 정확한 동작을 수행하였고, 어플리케이션과 생성된 코어에 따라 동적 전력 소모가 $20%{\sim}40%$ 줄어드는 것을 확인하였다.

음성 인식을 이용한 자동 교환 시스템 구현 (An Implementation of the Automatic Switching System using Speech Recognition)

  • 함정표;김현아;박익현
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2000년도 제13회 신호처리 합동 학술대회 논문집
    • /
    • pp.935-938
    • /
    • 2000
  • 본 논문에서는 음성 인식을 이용하여 전화를 교환해주는 자동 교환 시스템을 구현하고, 성능을 평가하였다. 구현된 시스템에는 필수적인 음성인식 이외에도 DSP 진단 기능, 인식 대상 어휘의 추가 및 변경기능, 음성 수집 기능 등이 구현 되었다. SCHMM (Semi-Continuous Hidden Markov Model)을 이용한 전화망에서의 화자 독립 고립 단어 가변 어휘 인식을 대상으로 하였으며, 실시간 구현을 위하여 Texas Instrument 사의 TMS320C32를 사용하였다〔6〕. 인식 어휘는 부서명 및 인명이고 1300여 단어일 때, 인식 성능은 91.5%이다.

  • PDF