• Journal of the Korean Professional Engineers Association
• /
• v.19 no.2
• /
• pp.10-20
• /
• 1986

This paper describes a countermeasure of electric utilities and customer equipment in order to minimize an effect of sensitive electrical and electronic equipment on the voltage disturbances. After being studied, some schemes to solve were discovered. Firstly, in the electric utilities, the reduction of frequency and influence of voltage drop's time are not easy to realize because of the standpoint of effect and economy. Secondly, in the customer equipment, there are some equipment to minimize the voltage disturbances, Such as an UPSs, a noise suppressors and a power conditioners. One of them should be established on the computer control and automated systems, the electromagnetic switch of delay-release type should be adopted on the electromagnetic switch, the controlling circuit should be adopted on the variable speed motors which is being considered a countermeasure for a momentary under-voltage drops, the luminaire adhering a instantaneous restrike device should be adopted on the HID lamp. And also, the scheme of extending a setting time of relay on the undervoltage relay and the forming method of sequence which is automatic reclosing at this time of instantaneous suspension of an electric supply have been studied.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.30 no.3
• /
• pp.150-160
• /
• 1994

Drift gillnet fishery for neon flying squid in the North pacific was one of the major pelagic fisheries of Korea until 1992, its annual catch was 79, 000M/T as average during 1988-1992, but moratoriumed since 1993 according to the decision of UN. Therefore, for the developing of the new fishing gear for the squid, the seven types of rip hook by automatic squid jigging machine were experimented by the korean research vessel Pusan 851 (G/T 1.126, 2.600 PS) in the North Pacific (38 $^{\circ}$30'-43 $^{\circ}$N, 152 $^{\circ}$E-178 $^{\circ}$W) from July 6. 1993 to August 31. 1993. The investigation on catch rate, dropout rate, and catch condition of the rip hooks related to the fishing lamp power for aggregating the squid were carried out during the period. The results obtained are as follows: The composition of catch by automatic squid jigging machine was 83.9% for neon flying squid. 15.5% for boreopacific gonate squid. 0.6% for boreal clubhook squid, and 0.01% for luminous flying squid. The catch rate of neon flying squid was 94.6% in 13.6-18.3$^{\circ}C$ of surface water temperature and 5.4% in others. The higher catch rate of neon flying squid was made in the range 13.6-18.3$^{\circ}C$ of temperature at the surface and about 1$0^{\circ}C$ of temperature at the 100m layer. The CPUE of neon flying squid in the 13.6-18.3$^{\circ}C$ of surface water temperature was ranged 0.8-11.8kg (8.7kg as average). The mantle length and body weight of neon flying squid caught in the experiment were ranged 18.3-51.3 cm, 140-3, 980g and mean mantle length and mean body weight were 29.4cm, 972g respectively. The catch rate of neon flying squid was the highest at dawn with a value of 25.0% of the total catch. The body weight of neon flying squid caught by the D type hooks was 1.7 times more than that of the A type hooks. The dropout rate of neon flying squid caught by the seven types hooks was 7.9-57.5% (19.0% as average), and dropout rate of the D type hooks was 7.9% with 2.7 times decrease than that of the A type hooks. The catch efficiency of small sized neon flying squid in case of using on-off switch method on fishing lamp in 15 minutes intervals was 2.6 times higher than that of the on-switch method with same fishing lamp power.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.351-358
• /
• 2016

An Electrical Point Machine (NS:New-type Switch), which is equipped and operated at railways in Korea, has been used since the 1960s after being imported from Japan. On the other hand, although the mechanical configuration has improved the position motor control circuit, the electrical connection has not been improved, so NS may have a problem, such as the interlocking system of automatic train operation. In addition, NS is the most vulnerable part in the railway system and a huge train accident may occur due to minor defects. The existing NS wiring set of the circuit controller should be checked only if fixed. Therefore, an excessive inspection time only by a Railroad Signal expert is required. In this paper, the improvement of electrical connection in a NS wiring set, such as the position motor control circuit, was developed and the prototype was installed at Seoul Metro in the distance to go section. The results can be used to help make appropriate adjustments. The improvement of the NS wiring set enhance the maintenance efficiency, passenger service and the stability of the signal system as well as reducing the maintenance cost.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.1
• /
• pp.126-142
• /
• 2016

This paper presents a wide-frequency-range, low-power transceiver with an automatic impedance-matching calibration for TV-white-space (TVWS) application. The wide-range automatic impedance matching calibration (AIMC) is proposed for the Drive Amplifier (DA) and LNA. The optimal $S_{22}$ and $S_{11}$ matching capacitances are selected in the DA and LNA, respectively. Also, the Single Pole Double Throw (SPDT) switch is integrated to share the antenna and matching network between the transmitter and receiver, thereby minimizing the systemic cost. An N-path filter is proposed to reject the large interferers in the TVWS frequency band. The current-driven mixer with a 25% duty LO generator is designed to achieve the high-gain and low-noise figures; also, the frequency synthesizer is designed to generate the wide-range LO signals, and it is used to implement the FSK modulation with a programmable loop bandwidth for multi-rate communication. The TVWS transceiver is implemented in $0.13{\mu}m$, 1-poly, 6-metal CMOS technology. The die area of the transceiver is $4mm{\times}3mm$. The power consumption levels of the transmitter and receiver are 64.35 mW and 39.8 mW, respectively, when the output-power level of the transmitter is +10 dBm at a supply voltage of 3.3 V. The phase noise of the PLL output at Band 2 is -128.3 dBc/Hz with a 1 MHz offset.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.1
• /
• pp.79-84
• /
• 2007

In this paper, a fully-integrated low phase noise multi-band CMOS VCO using automatic level controller (ALC) and switched LC tank has been presented. The proposed VCO has been fabricated in a 0.13-um CMOS process. The switched LC tank has been designed with a pair of capacitors and two pairs of inductors switched using MOS switch. By using this structure, four band (2.986 ${\sim}$ 3.161, 3.488 ${\sim}$ 3.763, 4.736 ${\sim}$ 5.093, and 5.35 ${\sim}$ 5.887 GHz) operation is achieved in a single VCO. The VCO with 1.2 V power supply has phase noise of -118.105 dBc/Hz @ 1 MHz at 2.986 GHz and -113.777 dBc/Hz @ 1 MHz at 5.887 GHz, respectively. The reduced phase noise has been approximately -1 ${\sim}$ -3 dBc/Hz @ 1 MHz in the broadest tuning range, 2.986 ${\sim}$ 5.887 GHz. The VCO has consumed 4.2 ${\sim}$ 5.4 mW in the entire frequency band.

• Journal of Biosystems Engineering
• /
• v.13 no.2
• /
• pp.38-45
• /
• 1988

This study was intended to develop the system automatically controlling travel direction of combine by means of sensing paddy rows. The control system was composed of three detecting levers having different length, micro-switch, microcomputer and electro-hydraulic control system. Sensor and control system developed was tested to estimate optimum design values and its actual performance as installed in combine. The computer simulation and performance test at simulated and actual field were conducted to test for possibility of practical use. The results of the study arc summarized. as follows: 1. The travel traces of combine hiving the conventional sensor with 2 levers and the new sensor detecting the slope of paddy rows were compared through computer simulation. Turning frequency of combine having new sensor was fewer than that of conventional sensor, but the rate of turning for the combine with new sensor was much greater than that of conventional sensor. 2. As sensor was established behind the tip of divider, the sensor itself well followed paddy rows but the tip of divider did not, resulting in divider being deviated from paddy rows. It was analyzed that the sensor should be attached closer to the tip of divider to have a better performance of the control system. 3. The greater the length of sensor lever for given location of sensor attachment and combine forward speed, the higher sensitivity of turning in control system. Moreover, increasing combine speed resulted in a worse performance of control system following paddy rows. Consequently, it was necessary that an optimum length of sensor attachment and for the range of combine operational speed. 4. Field test of combine installed with the sensor and electro-hydraulic system developed in this study showed that it may be operated smoothly and well behaved to paddy rows to 4th gear of combine speed which was 59cm/s. Consequently. it was concluded that the combine with the guidance control system developed in this study may be successfully used for paddy combining.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.1
• /
• pp.38-45
• /
• 2009

To get the constant output, synchronous generator field excitation is controlled by AVR(Automatic Voltage Regulator). Most of ships generator AVR uses the thyristor phase controlled rectifier. However this rectifier is difficult to realize that the fast control system because its control period is slower than MOSFET and IGBT type converter. Therefore, this paper deals with PMG(Permanent Magnet Generator) type digital AVR using MOSFET switch for ships synchronous generator. The composition of this digital AVR is very simple, the generator is under the short circuit accident, the output voltage becomes zero state and AVR can not operate. Thus generator is required to add CBC(Current Boosting Circuit) in an excitation circuit to flow output current. The performance of the proposed system is evaluated on a 10[kVA] experimental prototype circuit in place of real ships generator.

• KIPS Transactions on Software and Data Engineering
• /
• v.6 no.8
• /
• pp.385-390
• /
• 2017

Because of the ever-increasing software complexity, model-based development techniques are becoming an essential technique in software development. However, even if model-based techniques are used, the test case generation for complex software is still a challenge to solve. In this paper, we propose a method to generate automatic test cases based on UML model using custom parser and SMT solver. By proposed technique, a test case can be generated even though the model is described in a platform independent language such as action language, or in a platform dependent language. In addition, a concolic execution technique is applied to efficiently generate test cases in the model. In this paper, we present a case study on the power window switch model of Hyundai Santa Fe through the proposed test case generation technique.

• Journal of Biosystems Engineering
• /
• v.29 no.2
• /
• pp.167-174
• /
• 2004

Density is a physical property which contains information relating to the internal quality of fruits and vegetables, and can be used as an index for nondestructive quality evaluation. Density sorting has been employed by farmers for some agricultural products since ancient times. In this study, an automatic density measuring system based on the platform scale or water displacement method was developed for density sorting of watermelon. It consisted of water tan, load cell, net tray, electric motor, limit switch, control system and its program. The resolution of density was 0.001 g/㎤. In order to calibrate and evaluate the accuracy, the density was measured using a balloon kept in cold water. It showed 1.002 g/㎤ which almost correspond to real density of water. Test results with 6 watermelons and 3 replications showed that the standard deviations of the dens were 0.001∼0.004 g/㎤. The relationship between density and internal quality of watermelon was investigated using the system. The densities of hollow watermelons were less than 0.950 g/㎤, it was apparent that the density of the watermelon was related to the degree of hollowness. But the soluble solid contents and internal defects could not be estimated from the density.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.9
• /
• pp.125-132
• /
• 2002

We use a compound-cam twin arm structure and random tool access method to achieve a faster ATC (Automatic Tool Changer) system for the accurate position and rotation control of a tool magazine and an exchange am. Based on the data obtained from various sensors, it is possible to follow the sequence of commands in each control step for an exchange arm. However, it is not so easy to reduce the exchange time of the system because of the slow responses of the sensors and execution mode delays of PLC (Programmable Logic Controller) scan time. In this paper, we propose a new programmed limit-switch position control method to obtain the shortest possible delays for the random tool access method and compound-cam twin arm structure. With some experimental results, we have achieved below 0.9sec tool exchange time with the proposed method.