• Journal of Biosystems Engineering
• /
• v.15 no.2
• /
• pp.79-87
• /
• 1990

An automatic guidance system based upon two position-measurement systems was designed to record where the tractor traveled and to guide the tractor along the predetermined path. An algorithm, using the kinematic behavior of tractor movement, was developed to determine the steering angle to reduce lateral position error. The algorithm was based upon constant travel speed, constant steering rate, and zero slip angles of the tractor wheels. The algorithm was evaluated through use of computer simulation and verified in field experiments. Results showed that the distance interval between position measurements was an important factor in guidance system performance. The position-measurement error of the guidance system must be less than 5 cm to be acceptably precise for field operations. An algorithm based upon a variable steering rate might improve the stability of the guidance system. More accurate measurement of tractor position and yaw angle, and faster error processing are required to improve the field performance of the guidance system.

• Journal of Korea Society of Industrial Information Systems
• /
• v.12 no.1
• /
• pp.61-71
• /
• 2007

The main purpose of this study was to develop Automatic Measurement System for monitoring tree's vigor using Ubiquitous Sensor Network This study also focused on presenting an alternative for monitoring automatically tree's vigor due to Shigometer's limits. Application test of the system in comparison with Shigometer showed that the measurement values were not different to choose between the two, and battery lasted about 1,844 days in this system. To test the sensor network the possible transmission distance using the sensor network in maximum was 130m. Investigation and management expenses can be reduced and labor productivity will also be improved in the forest and street trees.

• 한국터널공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.270-281
• /
• 2005

An especial attention for old tunnel safety is required on increasing of The various tunnel recently. Specially, the lining investigation method of the old tunnel will be able to presume condition of concrete lining indirectly. Because it is many restriction thought of environment and ground condition investigation method of tunnel lining rear. This study carried out section & convergence measurement of part which was deformed in tunnel lining. It had been observed for the change of tunnel behavior with a continuous measurement. It has been analyzed for a cause of tunnel deformation and inspected for the effect after a repair-reinforcement to tunnel compared with the effect before those by structure analysis. By establishing automatic measurement system after repair-reinforcement to tunnel, it would be accomplished to convergence measurement continually. As a result, it was observed that deflection and deformation of tunnel was convergent. but it should be followed to a continuous maintenance because of unstable ground condition, cause of inner tunnel, environment. The railroad tunnel which was executed a reinforcement of the tunnel lining must investigate the close condition of reinforcement lining and concrete lining.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.445-449
• /
• 2001

The tool wear that is developed by long-term machining in mold manufacturing with machining center makes a severe influence to the accuracy and the surface roughness. In this reason, tool-wear supervising system which has guaranteed high accuracy and high speed is needed to improve the measurement quality. Touching probe and touch sensor are widely used to measure the tool profile at on-machine measurement. In this paper, using the newly developed electric touch point measuring system, the Automatic Tool Compensation System is developed to correct the error of tool diameter resulted from the wear, and the operating method of this system is also provided.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.41 no.4
• /
• pp.248-255
• /
• 2018

Ensuring the quality of molds is one of the major issues in mass production. In general, securing the quality of the molds is achieved by repeating grinding and die spotting after machining the molds based on engineer's decision. However, this heuristic method is affected by the engineer's skill and working environment. Therefore, a lot of time and resources are needed in order to ensure quality. In this study, ensuring the quality of molds using grinding map which is generated using automatic measurement is proposed. An automatic measuring system based on CMM (Coordinate Measuring Machine) is developed for measuring the molds. This system generates the measurement path automatically using the 3D CAD model of products. CAD (ComputerAided-Design), CAM (Computer-Aided-Manufacturing), and CAQ (Computer-Aided-Quality) technology is integrated using DMIS (Dimensional Measuring Interface Standard) format in the automatic measuring system. After measuring the molds, a grinding map is generated using the gap between the CAD model and measured values of mold. The grinding map displays the machining tendency and the required amount of grinding with values on a 3D map. Therefore, the quality of molds can be ensured with exactness and quickness based on the grinding map. This study shows that integrating the planning, measuring, and analyzing based on computer technology can solve the problem of quality assurance of mold using the proposed method, therefore the productivity can be increased.

• 유체기계공업학회:학술대회논문집
• /
• 2003.12a
• /
• pp.373-378
• /
• 2003

In this paper, build up of fan performance tester in KITECH was introduced. The fan tester was set up based on AMCA standards 210-99, ANSI/ASHRAE 51-1999 with maximum flowrate within $1000\;m^{3}/min$. Both of inlet and outlet chamber setup with multiple nozzles described in AMCA 210 were established. The development of fully automatic control and measurement system are described. With this system, the accuracy of fan performance test can be maintained through the various flowrate and the uncertainty can be reduced.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.59 no.3
• /
• pp.215-220
• /
• 2023

This study developed and evaluated a load cell-based automatic weighing system for the automated harvesting of laver (Porphyra tenera) in seaweed aquaculture. The current manual harvesting process was compared with the load cell-based automated system, and quantitative measurements of time, distance, and weight were conducted. The results demonstrated that the load cell-based system reduced the unloading time and increased the throughput compared to the manual method. In addition, statistical analysis confirmed that there was no significant difference from the mean in the weight measurement obtained using the load cell-based system. Based on these findings, the load cell-based automatic weighing system holds potential for efficient production and transactions in laver cultivation, contributing to cost reduction and improving the quality of life for aquaculture workers.

• Analytical Science and Technology
• /
• v.8 no.3
• /
• pp.335-340
• /
• 1995

Automatic biochemical oxygen demand(BOD) measurement system has heen developed using a microbial membrane electrode, prepared from Bacillus subtilis and polyvinyl alcohol(PVA). The automatic BOD measurement system showed a linear response curve up to BOD 60 ppm using a glucose/glutamic acid standard solution, and all the BOD measurement processes are carried out automatically to calculate BOD whithin 10 min after each sample injection. The response times of the microbial electrode was 5 minutes with a 5 min recovery time between measurements and the relative error of the BOD estimation was within 10%.

• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.546-555
• /
• 2009

There is increasingly interested in the measurement of antenna's characteristics for one's manufacture according to one's various application. Due to this, the antenna measurement system need be made with more and more great precision. On measuring of the antenna's characteristic, the conventional system handled by human generates the error due to controlling the position of the system by user. Therefore there need be introduced the automatic measurement system of antenna's characteristic. In this paper, we propose antenna extraction algorithm for the Antenna automatic measurement system of antenna's characteristic. The proposed algorithm gets the antenna image from antenna measurement system, extracts an antenna object from the image, and extracts the parameters for antenna's slant and antenna's location. The extracted parameters is used to correct location and distortions of the antenna and automatic measurement. The proposed algorithm is applied to the patch antenna. The results show that antenna's object is efficiently extracted and the angle for correcting the error is calculated well.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.5 no.2
• /
• pp.57-62
• /
• 1996

Basically, the idea underlying most edge-detection technique is the computation of a local derivative operator used for edge detection in gray level image. This concept can be easily illustrated with the aid of object which shows an image of a simple lilght on a dark background, Using the gray level profile along a horizontal scan line of the image. the first and second derivatives of it were acquired. This study is to develop an automatic measuring system based on the digital image processing which can be applied to the real time measurement of the characteristics of the ultra-thin thickness. The experimental results indicate that the developed automatic inspection can be applied in real situation.