• Journal of Biomedical Engineering Research
• /
• v.16 no.1
• /
• pp.85-94
• /
• 1995

We have developed MSPF (measurement system for physical fitness) which measures physical strength and body dimensions. This system has two main features, one is an automatic measurement of physical fitness, and the other is reducement of reading and writing errors caused by human during measurement. Using the MSPF, total ten items can be measured such as weight, height, sit up, push up,. etc. Since the system which have objectification and high precision has been needed, we used a memory card. By using this, it was easy to save and archive data by computer.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.5
• /
• pp.93-99
• /
• 2002

In general, manufacturing error is originated from bad material, machine tool defection and tool breakage. When the manufacturing process is stable, the most of error come from the tool wear. In common on-machine measurement teaching probe and touch sensor are widely used however in this paper the electric touch point type automatic tool compensation system is developed the performance of it is validated and effective operating is proposed.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.7
• /
• pp.34-42
• /
• 2022

Minimizing the backlash of gears and reducers is important for their proper and precise functioning. In this study, an automatic backlash measuring system was developed for the mass production and quality control of a military-grade reducer. The developed automatic backlash measurement system eliminates human error during the backlash measurement process. It also reduces the manufacturing time and digitizes the backlash number. The system was tested for an aircraft machine gun control reducer that required low-torque and high-precision conditions. The test results show that the torque range was 0.820-4.788 Nm. The maximum torque error is less than 0.231 N·m at 2.943 N·m, and 1.2 arcmin of the maximum backlash error with ± 0.3 arcmin of repeatability. The developed system satisfies all required conditions: torque of 1-3 Nm, torque accuracy within ± 0.5 N·m, and backlash accuracy of ± 3 arcmin.

• KSBB Journal
• /
• v.19 no.3
• /
• pp.241-244
• /
• 2004

An automated flow injection analysis apparatus manufactured economically was used in the automatic measurement of E. col growth in shake-flask culture of nutrient broth. The detailed measurement of whole growth was possible at intervals of 10 minutes by the automatic measurement system which adopted the sterilized nutrient broth as a carrier solution. Using distilled water as a carrier solution showed less accurate results than nutrient broth.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.283-283
• /
• 2009

Composition environments - Automatic Control System based on Sproute Cultivator using Remote Conditional Driving System was realized. It was carried out to investigate into the characteristics of LEDs Control for the cultivation of sprouts. We have also composed a Combined Automatic Control System possible for the control of temperature and humidity at the same time. The applied LEDs for measurement are blue, green, red, white, yellow leds. And we had also designed the Web Programming for the automatic control about sprout cutivators.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.9
• /
• pp.892-896
• /
• 2011

This paper describes a camera-based position measurement system for automatic tracking control of a rubber Tired Gantry Crane (RTGC). An automatic tracking control of RTGC depends on the ability to measure its displacement and angle from a guide line that the RTGC has to follow. The measurement system proposed in this paper is composed of a camera and a PC that are mounted on the right upper between front and rear tires of the RTGC's side. The measurement accuracy of the system is affected by disturbances such as cracks and stains of the guide line, shadows, and halation from the light fluctuation. To overcome the disturbances, both side edges of the guide line are detected as two straight lines from an input image taken by the camera, and parameters of the straight lines are determined by using Hough transform. The displacement and angle of the RTGC from the guide line can be obtained from these parameters with the robustness against the disturbances. From the experiments with the disturbances, we found the accurate displacement and the angle from the guide line that have the standard deviations of 0.95 pixels and 0.22 degrees, respectively.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.51 no.5
• /
• pp.203-211
• /
• 2002

In this paper, the implementation of a new AF(Automatic Focusing) system for a digital still camera is introduced. The proposed system operates in real-time while adjusting focus after the measurement of distance to an object using a passive sensor, which is different from a typical method. In audition, measurement errors were minimized by using the data acquired empirically, and the optimal measuring time was obtained using EV(Exposure Value) which is calculated from CCD luminance signal. Moreover, this system adopted an auxiliary light source for focusing in absolute dark conditions, which is very hard for CCD image Processing. Since this is an open-loop system adjusting focus immediately after the distance measurement, it guarantees real-time operation. The performance of this new AF system was verified by comparing the focusing value curve obtained from AF experiment with the one from the measurement by MF(Manual-Focusing). In both case, edge detector was used for various objects and backgrounds.

• Journal of the korean Society of Automotive Engineers
• /
• v.9 no.5
• /
• pp.6-18
• /
• 1987

Owing to remarkable development in automotive industry, vehicle performance comes close to perfection and guarantee of stability is getting emphasized in accordance with high speed trend in vehicle. In recent years, the utilization of automatic test method for research and development of automotive brake system is being propelled actively, which pursue whole automatic control from simple measurement to data acquisition. The main subject of this paper is to make a brief explanation on Micro computer controlled Automatic Test Method for Automotive Brake System which makes it possible to test with high accuracy and speed.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.17 no.3
• /
• pp.177-183
• /
• 2022

To measure the size and weight of the fish, we developed an automatic fish size measurement system using a deep neural network, where the YOLO (You Only Look Once)v3 model was used. To detect fish, an IP camera with infrared function was installed over the fish pool to acquire image data and used as input data for the deep neural network. Using the bounding box information generated as a result of detecting the fish and the structure for which the actual length is known, the size of the fish can be obtained. A GUI (Graphical User Interface) program was implemented using LabVIEW and RTSP (Real-Time Streaming protocol). The automatic fish size measurement system shows the results and stores them in a database for future work.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.43 no.5
• /
• pp.711-724
• /
• 2019

The automatic drafting of clothing patterns can be realized through an Apparel Cad System when the clothing pattern has a pattern expression in human dimensions. However, it is difficult to apply automatic systems because it is difficult to express the ready-to-wear of various complex designs with one system. This study develops ready-to-wear patterns in an automatic drafting style and also develops nude patterns with human dimension-based drafting styles that can be applied to enable the setting of margins by design. For this purpose, radial body length measurement items and measurement methods were newly defined for female standard dummy and nude pattern systems. The institutional program was developed through the principle of a nude pattern system which is different from the pattern system of the existing system. The nude pattern developed in this study represents a basis and framework for the gradual transformation of the production pattern into the automatic system of the future and as a pattern having an institutional formula based on human dimensions.