• Journal of Navigation and Port Research
• /
• v.27 no.6
• /
• pp.693-700
• /
• 2003

Universal AIS, which has been adopted officially for automatic identification systems among regulated ships by SOLAS, should be installed, for example, on all passenger ships over 300 tons engaged in international voyage and over 500 tons in domestic voyage, sequentially from 2002 to 2004. We must not overlook the fact than-ruled regions by regional authorities in the case of VTS. Actually a major portion of accidents have happened in small vessels like fishing vessels. However, they are not equipped with automatic identification tools, due to the high costs of the equipment for identifying purposes, as well as the absence of regulation In this paper, we researched the alternative of automatic identification for small vessel instead of universal AIS. We analyzed the requirement of automatic identification for small vessel about wireless communication method, traffic volume, etc. We proposed the identification system for small vessels in local areas and developed the Local Vessel Identification System (LVIS) interoperable with universal AIS using a PDA platform and wireless network.

• Journal of Space Technology and Applications
• /
• v.2 no.2
• /
• pp.121-136
• /
• 2022

Automatic Identification System used in ship communication is required for marine control way, including monitoring of vessel operation in coastal and exchanging of information for safety navigation between them. But, it uses a very high frequency band of approximately 160 MHz, and at the same time, due to the curvature of Earth, there is a limit to the communication distance. Several demonstrations were made successfully over satellite, but not much work has been done yet through cube-satellite which has low-orbit at 500 km altitude. Here, we demonstrate a reception test of AIS (automatic identification system) receiver for a cube-satellites using software-defined radio (SDR). We collected AIS data from ship at port of Busan, Korea, using R8202T2 SDR and established to transmit them using Adam-Pluto and Matlab Simulink. The process of weakening the signal strength to a satellite was constructed using attenuator. Through above process, we demonstrated whether AIS data was successfully received from the AIS payload.

• Journal of Navigation and Port Research
• /
• v.33 no.10
• /
• pp.685-690
• /
• 2009

International Maritime Organization (IMO) recommends the installation of an Automatic Identification System (AIS) according to requirements by SOLAS to avoid maritime collision. AIS provides traffic information of other ships that may be used for maritime traffic control, SAR (Search and Rescue) and collision avoidance to apply safety management. In this paper, preliminary results to implement an aeronautical surveillance transceiver using AIS transceiver based on ADS-B concepts are described. Although altitude information is not required for AIS since the AIS is operated at MSL (Mean Sea Level), altitude information can be extracted by a GPS (Global Positioning System) chip-set in the AIS transceiver. ADS-B transceiver is implemented by defining a surveillance message format including the altitude information and modifying SOTDMA (Self-Organizing Time Division Multiple Access) protocol. Ground tests and flight tests are performed to validate the implementation results.

• Journal of information and communication convergence engineering
• /
• v.6 no.4
• /
• pp.370-375
• /
• 2008

Automatic Identification System (AIS) is recently introduced to the maritime navigation systems. It is aimed to increase safety of vessels at sea by exchanging information to coastal monitoring stations. This article presents a ship traffic monitoring system by using the AIS information communication system using MS Visual C++. Then, the mobile Internet AIS introduced here is considerably improving and extending AIS functionalities compared to VHF AIS. When each ship is connected to the Internet network through the developed AIS system with her own client ID, all of her AIS information is surely sent to a server at her own base station by processing the information via the Internet network.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2009.06a
• /
• pp.19-20
• /
• 2009

International Maritime Organization(IMO) recommends the installation of an Automatic Identification System(AIS) according to requirements by SOLAS Chapter 5 to avoid maritime collision. AIS provides traffic information of other ships that may be used for maritime traffic control, SAR(Search and Rescue) and collision avoidance to apply safety management. In this paper, preliminary results to implement an aeronautical surveillance transceiver using AIS transceiver based on ADS-B concepts are described. Although altitude information is not required for AIS since the AIS is operated at MSL(Mean Sea Level), altitude information can be extracted by a GPS chip-set in the ALS transceiver. ADS-B transceiver is implemented by defining a surveillance message format including the altitude information and modifying SOTDMA protocol. Ground tests and flight tests are performed to validate the implementation results.

• Journal of Satellite, Information and Communications
• /
• v.11 no.3
• /
• pp.92-99
• /
• 2016

AIS(Automatic Identification System) is an vessel traffic management system which exchanges vessel data with other nearby ships, AIS base stations using VHF band. A domestic AIS base station is located along coast lines or island. So it is difficult to collect vessel data from the ocean. To solve this problem, we adopted AIS payload on the low earth orbit satellite. The AIS payload on the satellite is interfaced with OBC(On-Board Computer) via UART and the FSW(Satellite Flight Software) manages it. The FSW have to receive AIS command from ground station and forward to AIS payload. Similarly FSW have to receive response, OBP, OGP data from AIS payload and it is downlink to the ground station. So in this paper we describe the FSW design & implementation for AIS payload.

• Journal of Navigation and Port Research
• /
• v.34 no.5
• /
• pp.343-348
• /
• 2010

As the marine transportation has increased, the safe maneuvering system has been required. SOLAS obligated regulations for carrying AIS(Automatic Identification System) onboard. This system provides navigational information including identification, classification, position, a ship's course and voyage status from own vessel to ground and other vessels. Being utilized in the most development of application service for safe maneuvering, they are to be managed systematic. In this paper, we introduce a database system to manage the voyage status and navigational information of AIS message. It is classified by static or dynamic. An electronic navigational chart display system is implemented to verify the design.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2001.10a
• /
• pp.19-25
• /
• 2001

At present the identification of vessels is still depending on the OOW (Officer Of Wateh) in VTS (Vessel Traffic Service), which is completed by radar, and also by the combination of VHF radio and VHF direction finder. However, with the development of port transportation and economic, this conventional way of identification can't satisfy more and more request for the information that the VTS needs from the vessels. In such a case, the AIS(Automatic Identification System) precept which is based on STDMA (Self-organized Time Division Multiple Access) technique is put forward by IMO (International Maritime Organization). AIS can automatically provide the information, including own ship's identification, type, position, course, speed, and other information to the appropriately equipped coast station and other ships. At the same time it can also automatically monitor and track the nearby ships similarly fitted with AIS. On the basis of describing the whole comprising and the format of transmission information of AIS, this paper mainly studies the key communication techniques in AIS, such as STDMA protocol, net synchronization and GMSK(Gaussian Minimum Shift Keying)technique, and so on. At last this paper briefly introduces the recommendation decided by IMO on forcing the sea-going ships to fixed with AIS equipments, and it continuos with the unexploited potential of AIS if it applies in VTS.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.430-432
• /
• 2013

AIS(Automatic Identification System) is a radionavigation equipment for exchanging safety related information between ships as well as ship and shore station, introduced by SOLAS convention and widely used especially in vessel traffic service. However, in an area of broad communication coverage of coast station, various problems may appear in receiving AIS data from ships. In this paper, AIS problems that may happen in broad communication coverage of coast station are analyzed using received data.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.3
• /
• pp.129-138
• /
• 2018

In port and coastal areas where ship traffic is frequent, ship noise dominantly influences underwater noise in low frequency band below 1 kHz. In this paper, we propose a modeling method to estimate the underwater shipping noise using the voyage information of ship observed in AIS (Automatic Identification System). For the purpose of ship noise modeling, the navigation information of the vessels operating in the southern part of Jeju was observed using AIS and underwater noise was measured by installing a hydrophone in the experimental area to verify the modeled ship noise. AIS data were used to model the noise level of ship and compared with measured underwater noise. The variation of noise level with time was found to be similar, and the cause of the error was discussed. Through this study, it was confirmed that the noise level of ship can be estimated within 5 dB error range using AIS data.