• 한국산업융합학회 논문집
• /
• 제21권5호
• /
• pp.257-263
• /
• 2018

It is a small injection molding machine for table top considering the material heating mechanism and the design and structure stability by securing the mechanism that compresses the inside of the material heating tube by using the electric actuator and by providing space between the body and the material heating tube to reduce heat loss Develop body. An electric actuator suitable for applying pressure to the inside of a material heating tube is a mechanical system composed of a rigid structure. Since a large force is repeatedly applied to the electric actuator and the push rod, the interaction between the moving parts and the dynamic Maximum stress through analysis and prediction of fatigue life of critical parts The pushrod reflects the structural analysis results of the electric actuator and the push rod, and pushes the inside of the material heating tube by the push rod to inject the molten material from the nozzle into the mold. The pushrod operates by the operation of the electric actuator. The material heated by the coil heater is ejected through the nozzle by the pressure of the material heating tube, and the material heating tube and the nozzle are also lowered at the same time as the push rod is lowered, so that the material is closely adhered to the mold. We want to study the completion of the injection.

• 한국지열·수열에너지학회논문집
• /
• 제12권4호
• /
• pp.21-26
• /
• 2016

In this study, the control strategies of indoor air temperature in floor radiant heating system were researched by computer simulation. The temperature difference based time control method using the difference of indoor set temperature and indoor temperature is compared with the existing On-Off control one for heating control performances. As a result, the temperature difference based time control method shows better thermal environmental characteristics in case of selected operational conditions in comparison with existing control one.

• 대한조선학회논문집
• /
• 제35권2호
• /
• pp.104-113
• /
• 1998

선박 생산 현장에서는 선체의 곡가공을 위해 선상가열법이 널리 사용되고 있다. 최근 선박 생산성 향상을 위하여 선상가열법에 의한 강판 곡가공 자동화 시스템에 대한 연구가 활발히 진행되고 있으나, 그 연구들은 주로 각각의 가정된 역학 모델을 도입하여 가열에 의한 판의 변형 거동을 해석하는 데에 집중되고 있고, 실제 곡면 가공에 이용될만한 실용성있는 가열선 결정 방법을 제시하는 것은 드물다. 본 논문에서는 선상가열 공정을 시뮬레이션하기 위해 새로운 가열선 결정 알고리즘을 제안한다. 이 알고리즘의 특징은 가공곡면과 목적곡면의 차이를 나타내는 변위차이곡면의 곡률을 계산하는 것이다. 몇 가지의 전형적인 곡면 형상에 대해 점검한 결과, 실용성과 적용 가능성을 확인하였다.

• 한국의류학회지
• /
• 제41권5호
• /
• pp.872-882
• /
• 2017

There are no specific guidelines on how to control the heat input for the heat generating smart base layer. This study investigated the mode of actuating heat pad attached to the base layer by performing a human wear test in a cold environment. Subjects participating in the test wore T-shirts, jumper and pants on the base layer with heating pads. Skin temperature, total time of heating and the number of switching for the heating mode were observed as the subject controlled the heating mode voluntarily. The comfortable range of skin temperature on the abdomen was larger than on the lower back. The subject felt hot and turned off the switch when the mean skin temperature of the abdomen was $48.8^{\circ}C$ and the lower back was $40.1^{\circ}C$. The total heating time and the number of actuating switching were larger for women than men. The voluntary action of heating for men with high cold sensitivity was significantly different from men with low cold sensitivity. Therefore, it is necessary (depending on gender and cold sensitivity) to set the heating mode differently for the automatic heat control of a future smart base layer.

• 한국전자통신학회논문지
• /
• 제10권5호
• /
• pp.623-628
• /
• 2015

현재의 시설하우스에서의 난방 방식은 한 곳에 고정되어져서 위치에 따른 온도 편차가 심해 질 수밖에 없는 실정이다. 채소나 과일 작물 등을 재배하는 시설하우스는 적정 온도의 유지가 필수적인데 하우스 내부의 상하 온도 차이로 인해 적정 난방 또는 냉방을 위한 에너지 소모가 많다. 본 논문에서는 하우스 내부의 공기 순환을 효율적으로 할 수 있는 새로운 형태의 난방 방식인 수직형 교반 히터 자동 제어 시스템을 제안한다. 시설하우스 상 하부의 온도를 이용하여 수직형 교반 히터의 공기 순환 팬과 히팅을 상황에 맞게 독립적으로 제어함으로써 최소한의 전기 소비로 난방의 효율을 극대화 시켜 계획 가능한 작물 생산과 난방비 절감이 가능하다.

• 환경영향평가
• /
• 제12권4호
• /
• pp.281-290
• /
• 2003

The influence of land-use type on surrounding temperature was studied the relationships between land-use types and the air condition analyzing AWS (Automatic Weather Station) data of Seoul from KMA (Korea Meteorological Administration). The distribution of air temperature by land-use type has been influenced by the different heating and cooling rates. The difference of heating rates depending on the land-use type was largest at 2~3hours after sunrise and the difference of cooling rates was largest from 2hours before sunset to 2hours after sunset with its maximum at sunset. The difference of cooling rates is greatest in a clear and calm weather situation and the large difference in cooling rates between the green areas and built-up area is up to $1.5^{\circ}C/h$. By season, the difference of cooling rates is largest in fall and in turn spring, winter and summer. In a cloudy or rainy day, the difference in heating and cooling rates on land-use type is not distinct but the tendency is similar to a clear day. In all seasons, the rate of difference occurrence of the daily range of temperature between the green areas and built-up area was large, especially fall. In a fall with a clear and calm day, the magnitude of the daily range of temperature between the green areas and built-up area was largest.

• 대한조선학회논문집
• /
• 제34권3호
• /
• pp.104-112
• /
• 1997

선각의 곡면 가공을 위한 선상가열법은 숙련된 기능공의 경험에 전적으로 의존하고 있으며, 각 조선소에서는 생산성 향상을 위한 자동화 기술을 절실히 요구하고 있다. 선상가열에 의한 곡면형성 과정을 역학적으로 시뮬레이션 하기 위해서는 초고속 컴퓨터를 이용하더라도 수십시간의 방대한 계산이 요구되는 대변형 열탄소성 해석이 필요하다. 본 연구에서는 선상가열에 의한 판의 변형을 효율적으로 정확하게 계산하기 위한 간이 열탄소성 해석 기법을 개발하고, 일련의 선상가열 실험을 통해 그 정확성을 확인하였다.

• 설비공학논문집
• /
• 제18권12호
• /
• pp.964-970
• /
• 2006

Vapor compression refrigerators have much critical variables such as the controls of temperature and pressure switches, control durations and operating hours of electronic valves. This study compares and analyzes the data which is obtained from system controlling of the evaporation temperatures which are generally used in automatic pump down operating systems. Through this study, the automatic evaporation control operation system will be more ideal for the system to keep the proper temperature distribution depending on the purpose of evaporation side. The automatic pump down control operation is more appropriate for the system to aim at the effective use of evaporation side without using the temperature difference. And this test will be proved that the changes at the low pressure side didn't have significant impacts on the high pressure side.

• 한국전자통신학회논문지
• /
• 제15권2호
• /
• pp.253-258
• /
• 2020

우리나라의 석유화학산업단지는 폭발성 가스와 가연성 가스로 인하여 언제나 폭발 위험성이 높다. 이러한 폭발을 방지하기 위한 방법으로 석유화학산업단지의 대부분 설비에 방폭 성능을 요구하고 있다. 방폭용으로 현재 사용하고 있는 제어기 패널은 패널의 내부와 외부의 압력(양압)과 온도를 일정하게 유지를 위해 외부에서 수동으로 공기를 주입하는 방식을 사용하고 있다. 이에 본 논문은 자동으로 온도를 제어할 수 있도록 패널 내부의 온도에 따라 가열과 냉각을 자동으로 수행하는 자동 온도조절기를 제안한다.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.776-783
• /
• 2022

Since Mechanical, Electrical, and Plumbing(MEP) routing is a repetitive and experience-centered process that requires considerable time and human resources, if automated, design errors can be prevented and the previously required time and human resources can be reduced. Although research on automatic routing has been conducted in many industries, the MEP routing in AEC projects has yet to be identified due to the complexity of system configuration, distributed expertise, and various constraints. Therefore, the purpose of this study is to identify the target subjects for MEP routing automation and the constraints of each subject. The MEP design checklist provided by a CM company and existing literature review were conducted, and target subjects and constraints were identified through process observation and in-depth expert interviews for five days by visiting a MEP design company. The target subjects were largely divided into six categories: air conditioning plumbing, air conditioning duct, restroom sanitary plumbing, heating plumbing, and diagram. The findings from interviews show that work reduction and error reduction has the greatest effect on air conditioning plumbing while the level of difficulty is the highest in air conditioning duct and restroom sanitary plumbing. Major constraints for each subject include preventing cold drafts on air conditioning pipes, deviation in ventilation volume in air conditioning ducts, routing order on restroom sanitary plumbing, and separation distance from the wall on heating plumbing. In this way, subjects and constraints identified in this study can be used for MEP automatic routing.