• Journal of the Korean Association of Geographic Information Studies
• /
• v.24 no.4
• /
• pp.82-98
• /
• 2021

In recent years, as the number of ground subsidence has increased nationwide, the latest and usefulness of underground information for underground space development and underground safety management has become more important than ever. However, the 3D Underground Geospatial Map project, which started in 2015, has a problem with the manual-based long-term update system. This research paper overcomes these limitations and automatically updates the 3D CAD/GIS-based integrated management of underground structures that can be managed automatically from a full-cycle perspective of underground structure data management such as processing, transformation, updating, management, and visualization of 2D/3D underground structure data. If this technology is applied, it is possible to integrate processing and update management of the existing complex 3D construction logic of underground structures in one system, and it is expected that it can be used for underground space development and underground safety management as a foundation technology for automatic update of underground structures data.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.4
• /
• pp.89-97
• /
• 2014

As the digital control technologies in automotive industry have advanced, electronic control units(ECUs) play a key-role to improve system performance. Transmission control unit(TCU) is a shifting controller for automatic transmission of which major functions are to determine the shift and manage the shifting process considering the various sensor signal on transmission and driver's commands. As with any ECU in vehicle, TCU performs complex algorithms such as shift control, diagnostic and failsafe functions. However, firmware design analysis is hardly possible by the reverse engineering due to code protection. Transmission simulator is a hardware-in-the-loop simulator which enables TCU to work in normal mode by simulating the electrical signal of TCU interface. In this research, diagnosis and failsafe algorithm implemented on commercialized TCU is analyzed by using the transmission simulator that is developed for wheel loader construction vehicle. This paper gives various experimental results on the proportional solenoid current trajectories for different operating modes, error detection criterion and limphome mode gears for all the possible cases of clutch malfunction. The derived results for conventional TCU can be applied to the development of inherent TCU algorithms and the transmission simulator can also be utilized for the test of TCU to be developed.

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.575-578
• /
• 2008

Currently the automobile parts manufacturing industry of most, it is difficult in the automobile part development and purchase and production management. And when new regulation it will develop this automobile parts and changing design, it is difficult in new registration and history management. Automatic history management and DB construction about automobile parts is in great demand. The purpose of paper is a design of data retrieval and real-time production integration management for automobile parts. Automatic data update is accomplished as input material changing process for design data change and integration management of history information about parts is possible when input the name of an part and the number of an part.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.388-391
• /
• 2008

The Domestic housing Industry has to give consequence to the redevelopment and rebuilding of existing housings rather than the supply by developing a new building site, and now those tendencies are rapidly spreading out. Also, because apartment buildings occupies 50% over of the existing housing, its maintenance, repair, remodeling and reconstruction got to be necessary area for the slumming prevention of a residential area and the disaster prevention occurred by durability lowering of the building. It is increasing the interest for reusing and recycling of C&D waste. The government is doing efforts to diminish amount of C&D waste. But there couldn't find any efforts for developing Integrated system to manage and to estimate lightly generated amounts of C&D waste. So, this study presents a integrated computer system that can estimate easily quantity of C&D waste by using CAD draw and 3D Object.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.358-363
• /
• 2007

Reinforcing steel work plays an important role in terms of its structural performance or weight of construction cost for reinforced concrete structures. Precise estimation of re-bar quantity gives a basis for managing the reinforcing steel work effectively. However, the estimation process is still performed ineffectively based upon the expert's experience or manpower in spite of the advanced technology or improvement efforts. Therefore, the purpose of this research is to develop a prototype system for taking-off the quantity of reinforcing steel bars quickly and accurately in an order consistent with the specific members identified on the drawings. An estimate algorithm considering the connection, settlement and coating thickness of re-bars was suggested regarding to their replacement conditions which places more emphasis on constructibility. Also, this system produces the shop drawings automatically with the calculation results.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.9
• /
• pp.545-551
• /
• 2004

CBTC(Communication Based Train Control) System can improve train operation efficiency by realizing moving block system which makes a continuous train interval control in accordance with the position and speed of train. Adopting radio transmission to make a continuous detection of train position and transmit the control data from the ground to a train, CBTC needs dedicated train operation and control algorithm which should be quite different from the conventional track-circuit-based train control system. This paper provides a train operation display and control algorithm for CBTC system in making train interval control, train route control and train supervision. Signalling pattern diagram is devised to analyze the train interval control mechanism of moving block system, and interlocking logic is devised to represent the train route control mechanism of moving block system. For train supervision, train occupation status on railway are displayed by using the segment which virtually divide the whole railway. The proposed method has been successfully applied to the development of CBTC system for the standardized AGT(automatic guided transit) which is under construction now in Korea, and also can be applied to any other CBTC system.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.11 no.1
• /
• pp.62-71
• /
• 2008

Recently, the expansion of housing developments has reduced green areas in cities. The reduction of green areas caused many negative effects on human beings. For functional improvement of ecosystem, government focuses on artificial ground greening because it gives improving microclimate and saving energy consumption. This research aims to develop the system to support decision making of greening for artificial ground greening. This system consist of rooftop greening, wall greening, and street greening system which can suggest proper type of greening and calculate the effect of the greening considering the proponents inputs. It presents social, economic, and ecological value such as cost, energy saving, and temperature reduction. As it is web-based system users can easily access with internet. This system provides automatic selection modes.As a result, with this developed web-based system, decision makers can evaluate the effect of artificial ground green easily and the support to such movement will increase.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.474-477
• /
• 2005

The Industrial development and the Increase in population have brought out a rapid increase of wastewater discharge. To deal with this matter, much estimate has been spend on construction and management of a large scale sewage treatment plant. Although every effort has been carried out, river water quality has no significantly improved. Especially. the aggravation of the water quality in dry season is brought out a serious social problem. The purpose of this study Is the development of an optimal water quality management technique considering the efficient control of the multiple pollutant load associated with the total pollutant load control. A GUI(Graphical User Interface) system named 'QL2-XP' model is developed by object-oriencted language for the user convenience and practical usage. Suggested GUI system consist of hydraulic analysis. water quality analysis, optimized model calibration processes, and postprocessing the simulation results.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2000.11a
• /
• pp.197-205
• /
• 2000

Productivity of container cranes and gantry cranes is influenced by the performance of crane hardware and cycle time. Cycle time in container handling is influenced by the path of containers and relative positioning of containers. So we have to minimize the sway of containers and spreaders to minimize relative positioning time. And sway minimization is influenced by the skill of workers in manual gantry cranes. In this paper, we will survey some anti-sway systems. Each system has some merits and some shortages. And we will show our choice and its experimental equipment which is under construction.

• Journal of the Korea Computer Industry Society
• /
• v.3 no.12
• /
• pp.1697-1712
• /
• 2002

Unified Modeling Language (UML) is a standard language for specifying, visualizing, constructing, and documenting the artifacts of software systems. It simplifies the complex process of software design, making a blueprint for construction. In this paper, we apply automated application generation tools such as Rational Rose and BizWiz to a realistic cyber shopping mall and then compare and analyze them in the view of UML. We also propose some methods for the systematic system analysis, design, and implementation by applying UML to a customer management system based on above results.