• 한국정밀공학회지
• /
• 제2권3호
• /
• pp.59-69
• /
• 1985

The purpose of this paper is to investigate the variations of out-of- roundness due to its assessment methods for the practical workpieces. Experiments were carried out with the test specimens having the typical roundness profile. The roundness measuring system which has the autocentripetal functions and the automatic centering table unit was used. From the experimental results, it was found that the ratio of LSC to MZC values varied with the shape of roundness profiles, and the rate of variation for out-of-roundness was increased logarithmically with the increment of undulations by the effect of filter. Therefore, it is suggested that the least squares center method should be useful with the sufficient accuracy except for some special cases in the roundness profiles, and the condition of filter has considerable influence upon the out-of-roundness to be measured.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제2권2호
• /
• pp.69-72
• /
• 1997

The pH of microbial culture medium was calculated from equations of equilibrium, meterial balances for ionic components and electro-neutrality theory. Ammonium ion consumption and Acetic acid production are found out to be the major contributors for the alteration of the pH as well as the buffer capacity of the medium. By measuring the buffer capacity on-line, levels of acetic acid were estimated by a software sensor using pH signal in a fermentation process of E.coli growing in a minimal medium. The measured values of acetic acid showed good correlation to those of estimated by the software sensor.

• 한국환경생물학회:학술대회논문집
• /
• 한국환경생물학회 2005년도 추계학술대회 초록집
• /
• pp.117-117
• /
• 2005

• KSBB Journal
• /
• 제13권4호
• /
• pp.461-467
• /
• 1998

A fermentation system was supplemented with a device for the measurement of the durations of alkali pump feeding for automatic pH control and an A/D convertor for precise monitoring of pH value by computer. A software program was developed to measure buffer capacities from the pH signal and the pH control signal during fermentation. By measuring the buffer capacity on-line, levels of acetic acid were estimated by a software sensor using pH signal in a fermentation process of E.coli growing in a minimal medium. The measured values of acetic acid showed correlation to those of estimated by the software sensor. Lacitic acid production was also successfully estimated by the values of buffer capacities measured on-line.

• 한국멀티미디어학회논문지
• /
• 제21권12호
• /
• pp.1379-1386
• /
• 2018

In this paper, we proposed eyeglass type periorbital wrinkle treatment device for reducing and improving periorbital wrinkles using near infrared LED of 850nm wavelength and galvanic current. The proposed periorbital wrinkle treatment device is equipped with a control system based on F-PCB. It consists of eight near-infrared LEDs and four indicator LEDs for treatment of right and left periorbital wrinkles. The eyeglass frame is coated with conductive material, so galvanic current can flow to the skin of periorbital wrinkle contacted to it. One male adult in the mid-40s was allowed to use the device for 10 minutes every day for 4 weeks. After 4 weeks, image analysis using optical equipment for measuring wrinkles indicated that wrinkle indexes were reduced.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2020년도 추계학술발표대회
• /
• pp.617-620
• /
• 2020

최근 미세먼지에 관한 관심이 점점 커지고 있다. 이러한 미세먼지 중 우리가 가장 쉽게 접하는 종류에는 요리 진행 시 발생하는 미세먼지가 있다. 이에 본 논문에서는 사용자의 수동적인 작동이 필요하지 않고, 요리 여부와 미세먼지 농도 정도를 파악하여 자동으로 주방 후드를 제어하는 모듈을 구성하여 많은 사람이 미세먼지의 위험 없이 주방을 이용할 수 있도록 하고자 한다.

• 대한기계학회논문집A
• /
• 제27권2호
• /
• pp.310-316
• /
• 2003

One of the significant subject in the automatic arc welding is to establish control system of the welding parameters for controlling bead geometry as a criterion to evaluate the quality of arc welding. This paper proposes an inference algorithm for bead geometry in CMA Welding using Neuro-Fuzzy algorithm. The characteristic welding parameters are measured by the circuit composed of hall sensor, voltage divider tachometer, etc. and then the bead geometry of each weld pool is calculated and detected by an image processing with CCD camera and a measuring with microscope. The relationships between the characteristic welding parameters and the bead geometry have been arranged empirically. From the result of experiments, membership functions and fuzzy rules are tuned and determined by the learning of neural network, and then the relationship between actual bead geometry and inferred bead geometry are concluded by fuzzy logic controller. In the applied inference system of bead geometry using Neuro-Fuzzy algorithm, the inference error percent is within -5%∼+4% in case of bead width, -10%∼+10% in bead height, -5%∼+6% in bead area, -10%∼+10% in penetration. Use of the Neuro-Fuzzy algorithm allows the CMA Welding system to evaluate the quality in bead geometry in real time as the welding parameters change.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 C
• /
• pp.1121-1124
• /
• 1998

Inchon International Airport(IIA) is constructed for Northeast Asia Gate as is important for IIA to become a 21 century's leader in the world, as is planned for open at december 2000 as a important economic link for unified korea. Airport Power Information System(APIS) is designed through investigation of advanced domestic and international example. In addition to power facility operation it is designed for using an information infrastructure of whole airport. APIS is newly designed for uninterupted power supply, effective power management, information infrastructure's construction. making a profit by positively introduction of new technology for collection and conservation of power related data, correlation with airport infra systems, data interrelative arrangement about related systems like outdoor lighting system and automatic measuring record, CCTV systems for remote power facility monitoring, and promotion of management ability in the emergency status.

• Design & Manufacturing
• /
• 제16권1호
• /
• pp.21-26
• /
• 2022

In the CNC machining process, problems such as lowering of machine operation rate, setting errors, and machining precision occur due to the increase in setting time and preparation time. These machining errors cause delays in delivery and increase in cost due to an increase in the number of mounting and dismounting of the workpiece, an increase in measurement and reprocessing time, and an increase in the finishing time in the assembly process. Therefore, in this study, by automating the setting of the work piece using OMV (On Machine Verification), which is a meteorological measurement system, the preparation time for machining the work piece and the setting accuracy were improved, the rework rate was reduced, and the mold manufacturing process was shortened. Through the advancement, standardzation, and automation of the mold part manufacturing process, we have improved productivity by minimizing low-value-added repetitive tasks. In addition, the measurement time was reduced by more than 50% and the machining measurement rate was improved by more than 20%, eliminating repetitive work for correcting machining defects, and reducing the work preparation time by more than 15% through automatic setting.

• 한국컴퓨터정보학회논문지
• /
• 제15권2호
• /
• pp.65-74
• /
• 2010

본 연구에서는 비행슈팅게임을 플레이하는 피험자의 긴장 또는 이완상태를 자동으로 인식하는 시스템을 제안한다. 기존 연구에서는 피험자에게 자극원을 제시하여 나타난 변화 값을 비교하기 때문에 자동으로 분류하는데 한계가 있었다. 본 연구에서는 피험자의 상태 변화를 자동으로 분류하여 인식할 수 있도록 비지도학습의 SOM을 적용한다. 긴장과 이완상태의 자동인식을 위한 SOM의 적용은 두 가지 단계로 구성된다. 첫 번째 단계는 ECG측정 및 분석으로 피험자에게 게임을 플레이하게 한 후 ECG를 측정하여 HRV 분석으로 특징벡터를 추출한다. 두 번째 단계는 SOM 학습 및 인식으로 특징이 추출된 심박신호의 입력벡터들을 SOM으로 학습하여 피험자의 긴장과 이완상태를 분류하여 인식 한다. 실험 결과는 세 가지로 나누어진다. 첫 번째, HRV의 주파수변화와 두 번째 심박신호의 SOM 학습결과를 나타냈다. 세 번째 단계는 SOM학습의 성능을 알기 위해서 매칭율을 분석했다. HRV의 주파수분석의 LF/HF 비율을 1.5 기준으로 SOM의 승자뉴런 거리와 매칭한 결과 평균 72%의 매칭율을 보였다.