최근 국내 소비자들의 안전한 음식과 환경문제에 대한 관심이 높아지면서 재배작물과 경작지 토양의 물리 화학적 특성 등에 맞추어 적정 시비 및 재배관리를 적용하는 정밀농업이 시도되고 있다. 정밀농업은 농약 및 비료 등의 양을 적절하게 사용하여 생산 비용을 절감할 수 있으며, 과다사용을 막아 환경오염을 줄일 수 있다. 현재 토양의 수분, EC, pH등과 같은 항목은 신속하고 간단하게 분석이 가능하지만 토양의 필수 원소인 N, P, K 성분을 분석하는 제품은 상용화 되지 않았거나 가격이 비싸 일반 농가에서는 사용이 어렵다. 특히, 토양의 인을 현장에서 분석하기 위한 연구가 많이 수행되고 있으나 실제로 현장에서 사용되는 경우 또한 없는 상황이다. 일반적으로 토양에 포함되어 있는 인을 측정하기 위해서 많은 실험실에서는 이화학적 분석법을 사용하고 있다. 하지만 이 분석법은 오랜 시간과 전문적인 인력이 필요하며 주변 환경변화에 민감하여 실시간으로 분석하기에는 어렵다고 한다. 따라서 본 연구에서는 현장에서 실시간으로 토양의 인을 분석하기 위해 반자동 분석시스템을 제작하고 이를 검증하고자 하였다. 이전 연구에서 현장 토양을 이용한 신속측정법의 가능성($R^2>0.7$)을 확인하여 이 분석법을 바탕으로 반자동 분석시스템을 제작하였고 표준결과 값의 약 70% 이상의 수준을 목표로 하였다. 진주 지역의 현장 토양 20개 샘플과 반자동 침출 장치, 여과 장치, 발색 장치 그리고 통합 반자동 시스템을 이용하여 분석한 후 표준 분석 결과와 비교하였을 때 $R^2$ 값이 각각 0.985, 0.817, 0.893, 0.837로 약 70% 이상의 수준을 달성하였다. 추후, 반자동 토양 인 신속측정시스템을 완전 자동화 시스템으로 개발하고 주행 장치를 부착시켜 현장에서 실시간으로 원하는 위치의 인을 측정 할 수 있을 것으로 판단된다.
Experimental and analytical researches have been conducted on the twin-fluid atomizers for better droplet breakup during the past decades. But, the studies on the disintegration mechanism still present a great challenge to understand the drop behavior and breakup structure. In an effort to describe the aerodynamic behavior of the sprays issuing from the internal mixing counter-swirling nozzle, the spatial distribution of axial (U) radial (V) and tangential (W) components of droplet velocities are investigated across the radial distance at several axial locations of Z=30, 50, 80, 120 and 170mm, respectively. Experiments were conducted for the liquid flow rates which was kept constant at 7.95 g/s and the air injection pressures were varied from 20 kPa to 140 kPa. Counter-swirling internal mixing nozzles manufactured at angles of $15^{\circ},\;30^{\circ},\;45^{\circ}$ and $60^{\circ}$ the central axis with axi-symmetric tangential-drilled holes was considered. The distributions of velocities and turbulence intensities are comparatively analyzed. PDPA is installed to specify spray flows, which have been conducted along the axial downstream distance from the nozzle exit. Ten thousand of sampling data was collected at each point with time limits of 30 second. 3-D automatic traversing system is used to control the exact measurement. It is observed that the sprays with all swirl angle have the maximum SMD for on air injection pressure of 20 kPa and 140 kPa with centerline, respectively. The nozzle with swirl angle of $60^{\circ}$ has vest performance.
본 연구는 언제 어디서나 건강관리를 할 수 있는 u-health care를 위해 cuff를 사용하지 않고 손쉽게 혈압을 측정할 수 있는 기술을 개발하였다. ECG와 PPG 시그널(signal) 만을 이용하여 혈압을 실시간으로 측정할 수 있는 기존 기술은 PTT를 분석 할 때 노이즈나 진폭의 변화로 인해 Peak 추정의 오류가 자주 발생한다. 본 연구에서는 이를 해결하기 위해 적응적 peak 추정 기술을 개발하여 Peak 추정의 정확도를 향상시켰다. 이를 적용하여 측정데이터를 분석한 결과 PTT의 표준편차는 28%감소하였으며, 노이즈 탐지 성능은 18%증가하였다. 또한 PTT와 혈압간의 상관성에 대해 분석한 결과 수축기 혈압= -0.044 $\cdot$ PTT + 133.592의 상관식을 도출하였다. 도출된 상관식을 적용하여 PPG와 ECG 만으로 수축기 혈압을 연속적으로 측정할 수 있는 시스템을 구축하였다.
본 논문에서는 마이크로파를 이용하여 자동차, 무인 시설 및 자동문 등에서 적용 가능한 물체 탐지 장치 방안을 제안하고 있다. 마이크로파 탐지 기술이 보편화되면서, 제한된 대역폭으로 동반되는 상호 간섭 및 혼신은 필연적으로 예상된다. 본 논문에서는 간섭과 혼신 환경에서 영향을 받지 않는 가무작위(假無作爲) 코드를 사용하여 송수신 신호의 코드 상관으로 물체를 탐지한다. 도플러 주파수가 없는 고정 물체의 거리 탐침을 위한 가짜의 도플러(doppler) 신호를 생성하기 위하여 송신 신호의 위상은 지속적으로 변이된다. 또한, 수신 신호가 일정하도록 송신 신호의 전력을 제어하여, 수신기의 포화(saturation)를 제거하고 거리 측정 오차가 감소시켰다. 제안장치는 $0.5{\sim}2.0\;m$의 거리에 있는 물체를 탐지하여, 1.0 m 이내의 물체 유 무를 음성으로 알려준다.
본 연구에서는 미생물의 성장시 수반하는 대사열을 측정할 수 있는 직접 열량계의 기능을 가질 수 있도록 발효조를 개량하였다. 발효조의 온도제어신호의 길이를 측정하고 이 신호를 컴퓨터에서 전달하여 계산하고 발효조에 공급된 누적 열량을 측정할 수 있도록 발효조를 일부 개조하고 온라인 측정 시스템을 구성하였다. 균체 없이 발효조를 운전하면서 여러 조건에서 누적 열량을 측정하여 통기량의 따라 30.9kJ/vvm의 열손실과 공기중으로 전도 및 대류, 복사에 의한 0.5 kJ/L/hr/$^{\circ}C$의 열손실이 발생함을 측정할 수 있었다. 그리고 소형의 가열체를 반응액에 발생함을 측정할 수 있었다. 그리고 소형의 가열체를 반응액에 투입하여 열량측정의 정확도를 확인하였으며 누적열량은 $\pm$0.2%의 오차 범위 내에서 측정되었다. 본 시스템에소 효모와 대장균을 이용하여 대사열량을 성공적으로 측정할 수 있음을 보였다.
공정의 안전을 위해서 취급물질의 정확한 연소특성치의 사용은 매우 중요하다. 화학산업에서 다양하게 사용되고 있는 브로모벤젠의 안전한 취급을 위해서 인화점과 최소자연발화온도를 측정하였다. 폭발하한계는 실험에서 얻어진 하부인화점을 이용하여 계산하였다. Setaflash 밀폐식은 $44^{\circ}C$, Pensky-Martens 밀폐식에서는 $50^{\circ}C$ 그리고 Tag 개방식에서는 $56^{\circ}C$, Cleveland 개방식에서는 $64^{\circ}C$로 측정되었다. ASTM E659 장치에 의한 최소자연발화온도는 $573^{\circ}C$로 측정되었다. 측정된 하부인화점 $44^{\circ}C$에 의한 폭발하한계는 1.63 Vol%로 계산되었다. 폭발한계는 측정된 인화점이나 문헌에 제시된 인화점을 이용하여 예측 가능함을 알 수 있었다.
임계값 결정은 변화유무만을 판단하는 무감독변화탐지에 있어 매우 중요한 과정으로 인식되고 있다. 본 논문은 향후 수요 증가가 기대되는 원격탐사 데이터 중 하나인 초분광영상을 이용한 새로운 무감독변화탐지 기법을 제안하고 있다. 다중시기의 화소간 유사도 측정을 통해 도출된 결과값을 일정 간격으로 평균하여 그래프를 생성하고, 최대거리 기법을 적용하여 변화유무 정보를 추출하기 위한 임계값을 결정하였다. 참조자료를 취득할 수 있는 두 가지 의사영상을 통해 기대최대화 기법, 교점방법, Otsu 기법과 결과를 비교하여 성능을 평가하였으며, 이를 토대로 다중시기의 Hyperion 영상에 각 기법을 적용하여 변화탐지 결과를 확인하였다. 제안기법은 기존의 임계값 결정 기법과 비슷하거나 높은 정확도를 보였으며, 간단하게 적용할 수 있는 장점이 있어 향후 초분광영상을 이용한 무감독변화탐지에 효과적으로 사용될 수 있을 것으로 기대된다.
In this research, a vision system for detecting tool breakage which is hardly detected by such indirect in-process measurement method as acoustic emission, cutting torque and motor current was developed and embedded into a PC-NC system. The vision system consists of CMOS image sensors, a slit beam laser generator and an image grabber board. Slit beam laser was emitted on the tool surface to separate the tool geometry well from the various obstacles surrounding the tool. An image of tool is captured through two steps of signal processing, that is, median filtering and thresholding and then the tool is estimated normal or broken by use of change of the centroid of the captured image. An air curtain made by the jetting high-pressure air in front of the lens was devised to prevent the vision system from being contaminated by scattered coolant, cutting chips in cutting process. To embed the vision system to a Siemens PC-NC controller 840D NC, an HMI(Human Machine Interface) program was developed under the Windows 95 operating system of MMC103. The developed HMI is placed in a sub window of the main window of 840D and this program can be activated or deactivated either by a soft key on the operating panel or M codes in the NC part program. As the tool breakage is detected, the HMI program emit a command for automatic tool change or send alarm to the NC kernel. Evaluation test in a high speed tapping center showed the developed system was successful in detection of the small-radius tool breakage.
The stochastic variations and structures of time series data on water quality were examined by employing the techniques of autocorrelation function, variance spectrum, Fourier series, autoregressive model and ARIMA model. These time series included hourly and daily observation on DO, turbidity, conductivity pH and water temperature. The measurement was made by automatic recording instrument at Noryangjin and Dook-do located in the downstream part of Han River during 1975 and 1976. Hourly water quality time series varied with the dominant 24-hour periodicity, and the 12-hour periodicity was also observed. An important factor affecting 24-hour periodic variation of DO is believed to be photosynthesis by algae. These phenomena might be attributable to periodic discharges of municipal sewage. Noryangjin site showed the more distinct 12-hour periodicity than Dook-do site did, and tidal effect might be responsible for the difference. The water quality, as measured by DO and turbidity, was better in the afternoon compared with the quality in the morning. This change can be explained by the periodic variation of DO, temperature and the amount of municipal wewage discharge. It was also observed that the water temperature at Noryangjin was higher than the temperature at Dook-do. This difference might have been caused by the pollutants that were added to the section between two sites. The correlation coefficients between some of the variables were fairly high. For example, the coefficient was -0.88 between DO and water temperature, 0.75 between turbidity and river flow, and 0.957 between water temperature and air temperature. The lag time of heat transfer from the air to the water was estimated as 24 days. The first order auto-regressive model was appropriate for explaning standardized hourly DO time series. The ARIMA model of (1, 0, 0) type provided relatively satisfactory results for daily DO time series after the removal of significant harmonic value.
일상 생활에서 인간의 자세와 운동은 전정기관, 시각, 고유수용체에 의해 조절되어진다. 특히 전정기관은 정전안구반사를 통한 안구 운동과 전정척수반사를 통한 골격근의 수축 운동을 제어하는 매우 중요한 기능을 갖고 있다. 그러나 자세 조절기능의 손실로 인한 자세 부조화는 오심, 구토, 현기증을 초래하여 삶의 의욕을 상실케 만들고 안진이라 불리는 비정상적인 안구반사운동을 초래한다. 현기증 진단에 EOG를 이용한 안진의 분석이 필요하다. 본 연구의 목적은 데이터 처리를 위한 컴퓨터 시스템과 OKN 시뮬레이션 시스템에 의해 유발된 안진 서상속도의 자동평가 알고리즘을 개발하는데 있다. 본 논문에서는 RLSM을 이용하여 안진의 서상속도를 검출하는 새로운 알고리즘을 제안하였다. 이 방법은 눈 깜빡임과 같은 artifact에 둔감하여 안진의 빠르고 정확한 평가가 가능하다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.