본 논문에서는 난이도를 고려하여 선택형 문항을 자동으로 생성하는 방법을 고안하였으며, 학습자 수준에 적합하도록 동적인 형태로 다양한 문항 제시를 할 수 있는 시스템을 구현하였다. 선택형 문제를 통한 평가에서는 적절한 규모의 문제 은행이 필요하다. 이와 같은 요구를 만족시키기 위해서는 보다 쉽고 빠른 방식으로 다양하고 많은 문제 및 문항을 생성할 수 있는 시스템이 필요한데, 본 논문에서는 문제 및 문항의 생성을 위하여 워드넷이라는 언어 자원을 이용한 자동 생성 방법을 고안하였다. 자동 생성을 위해서는 주어진 문장에서 형태소 분석을 통해 키워드를 추출하고, 각 키워드마다 워드넷의 계층적 특성에 따라 유사한 의미를 가진 후보 단어를 제시한다. 의미 유사 후보 단어를 제시할 때, 기존의 한국어 워드넷의 스키마를 개념간 의미 유사도 행렬을 구할 수 있는 형태의 스키마로 변경한다. 단어의 의미 유사도는 동의어를 의미하는 수준 0에서 거의 유사도가 없다고 볼 수 있는 수준 9까지 다양하게 제시될 수 있으며, 생성될 문항에 어느 정도의 유사도를 가진 어휘를 포함시키느냐에 따라서 출제자의 의도에 따른 난이도의 조정이 가능하다. 후보 어휘들의 의미 유사도 측정을 위해서, 본 논문에서는 두 가지 방법을 사용하여 구현하였다. 첫째는 단순히 두 어휘의 워드넷 상에서의 거리만을 고려한 것이고 둘째는 두 어휘가 포함되어 있는 트리 구조의 크기까지 추가적으로 고려한 것이다. 이러한 방법을 통하여 실제 출제자가 기존에 출제된 문제를 토대로 더 다양한 내용과 난이도를 가진 문제 또는 문항을 더 쉽게 출제할 수 있는 시스템을 개발할 수 있었다.
Kim, S. M.;Park, S. J.;Kim, C. S.;Kim, M. H.;Lee, C. H.;J. Y. Rhee
한국농업기계학회:학술대회논문집
/
한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.II
/
pp.472-479
/
2000
A persimmon harvesting vehicle that can be operated in hilly orchards as well as a manipulator that can be used to harvest persimmons located in remote positions in the trees were designed and developed. The vehicle could be operated with keeping balanced position in an inclined field and its working platform could be moved up and down easy to approach fruits in a remote region with the aids of a hydraulic and a electrical and electronics systems. The weight of the vehicle was 927 kg and the center of gravity was located at 427 mm to the inner side from the center of a right driving caterpillar, 607 mm to a rear axle from the center of a front axle, and 562 mm to upward from ground. The automatic level control sensor for leveling the working platform was activated within 14.5 ∼ 16.5 degrees of slope variation. The total length of the manipulator was 1.39 m and weight is 975 g. It was powered by a 12 V geared motor to detach persimmon fruits with a rotational force. The gripper was made of plastic and rubber to increase a frictional force. In a performance evaluation test, static tipping angle, dynamic tipping angle toward front side when the vehicle was moving downward, climbing angle, driving speed of the vehicle were measured or calculated. In persimmon harvesting tests 24.9% of yield was increased by hand picking with the aid of the vehicle and additional 7% of yield were increased when the manipulator was used. Therefore, 99010 of total possible yield was achievable when both of the vehicle and the manipulator were used for the manual persimmon harvesting. Increase in 22.5% of total yield was achieved with the manipulator only.
Yoon, Sung Hoon;Lee, Kil Soo;Cha, Jae Sang;Mariappan, Vinayagam;Lee, Min Woo;Woo, Deok Gun;Kim, Jeong Uk
International Journal of Advanced Culture Technology
/
제8권1호
/
pp.207-212
/
2020
The human centric lighting (HCL) control is a major focus point of the smart lighting system design to provide energy efficient and people mood rhythmic motivation lighting in smart buildings. This paper proposes the HCL control using indoor surveillance camera to improve the human motivation and well-beings in the indoor environments like residential and industrial buildings. In this proposed approach, the indoor surveillance camera video streams are used to predict the day lights and occupancy, occupancy specific emotional features predictions using the advanced computer vision techniques, and this human centric features are transmitted to the smart building light management system. The smart building light management system connected with internet of things (IoT) featured lighting devices and controls the light illumination of the objective human specific lighting devices. The proposed concept experimental model implemented using RGB LED lighting devices connected with IoT features open-source controller in the network along with networked video surveillance solution. The experiment results are verified with custom made automatic lighting control demon application integrated with OpenCV framework based computer vision methods to predict the human centric features and based on the estimated features the lighting illumination level and colors are controlled automatically. The experiment results received from the demon system are analyzed and used for the real-time development of a lighting system control strategy.
초고급 언어에 의한 자동 프로그래밍은 프로그램의 자료구조 이외에 많은 부분을 시스템이 관장함으로써 프로그램 명세의 표현이 추상적이지만 프로그램 의미소가 술 어논리, 집합, 사상, 혹은 제안된 자연언어를 사용하기 때문에 초고급 구조에 익숙하 지 않은 프로그래머들이 이를 이용하여 프로그램을 작성하는 경우 상당한 어려움이 따 르고, 이들 초고급언어 구조에 익숙하기까지 많은 시간이 요하게 된다. 왜냐하면 초 고급언어는 프로그램 명세의 표현이 추상적이지만 프로그램 의미소가 술어 논리, 집합, 사상, 혹은 제한된 자연언어를 사용하기 때문이다. 본 논문에서는 기존의 자동 프로 그램의 어려움을 줄이기 위해서 한글로 구성된 선언적구문, 절차적 구문, aggregate 구문으로 광역언어를 설계하고 구현한다. 본 논문에서는 제안하는 한글 자동 프로그래 밍 시스템(Hangul Automatic Programming)은 입력으로 순수한 한글로 구성되어 있으며 추상 알고리즘(Abstract Algorithm)과 자료형(Data Type)혹은 절차적 구문을 받아서 출력으로는 C 언어 프로그램을 만들어 낸다. 자동 프로그래밍 접근 방식은 프로그램 변형기법과 규칙기반에 바탕을 두고 문제영역은 일반적인 프로그램으로 한정 하였다. 시스템 제어구조는 한글 프로그램을 입력으로 받아서 지식베이스로부터 적절한 규칙 을 선택해서 이것을 변형한 다음 전체 데이타 베이스에 넣는데 이과정을 프로그램이 완성 될 때 까지 반복한다.
As the various industrial production machinery has come into being by development of industrial technology, the productivity of the basic industrial production machinery has improved and the international competitiveness of the one of Korea has strengthened. However, at the same time, noise from various industrial production machinery disturbs the quiet environment. There are 35 kinds of the noise emission machinery defined in the noise and vibration control act according to the horse power and the number of machinery. These were classified in 1992 through investigation from 1990 to 1991, and the characteristic of the noise emission machinery may be different from the past one. So we need to investigate the characteristics of the noise emitted by machinery to control it rightly. Also we need to investigate the new noise emission machinery which has come into being recently. In this survey, we measured sound intensity of 32 noise emission machinery to calculate the sound power levels of those and investigated the characteristic of the sound power level of those according to the frequency. From the survey, we found that the forging machine, concrete pipe and pile making machine, sawing machine, etc. are the noisy machinery. And the automatic packing machine, sewing machine, centrifuge, etc. are the silent machinery. Also the generator, the concrete pipe and pile making machine, the printing machine, etc. emit the low frequency noise, and the molding machine, the stone cutter, the metal cutter, etc. emit the high frequency noise. Lastly, we intented to propose the proper guide line of classifying noise emission machinery.
메모리 제품의 사용 환경은 점차적으로 High Speed/High Density화됨에 따라 현 Comp. Test 환경으로 Field 환경을 모두 수용하기가 어려워지고 있다. 따라서, Component Level에서 다양한 실장 System을 이용한 Screen 방법이 요구 되고 있다. 다양한 환경에서 Test를 실시하기 위해서 필수 불가결한 조건은 온도(Temperature)를 자동으로 제어(Control)할 수 있는 기능이 필요하게 되었다. 이에, 현재 사용하고 있는 방법은 Chamber나 히터를 이용하고 있으나 온도 제어가 보다 용이하고 정밀한 기능이 요구됨에 따라 열전반도체(Thermoelectric semiconductor)원리를 이용한 온도 제어 장치 도입을 위한 연구가 진행되었다. 본 논문에서는 그 개발 현황 및 평가 결과를 근거로 신규 Component실장 Tester에 효율적으로 도입 적용 가능함을 제시 하고자 한다. 또한, 향후 기타 Tester 및 산업용 설비 등에 까지 확대적용 가능함으로써 전자부품(메모리)의 품질 향상 및 설비투자 Cost절감 효과가 기대 된다.
최근 미국과 유럽 등 항공 선진국들은 효율적인 항공교통관리를 위해 기존 레이더 시스템을 대체할 차세대 항행시스템으로 위성기반항행시스템(CNS/ATM)에 많은 관심을 가지며 지속적으로 연구를 수행하고 있다. 본 논문은 CNS/ATM의 감시 기술 중 하나인 ADS-B 1090ES 시스템의 수신기 복조부 설계 및 구현에 대한 연구를 하였다. 본 연구는 RTCA DO-260B와 EUROCAE ED-129에서 제시된 모든 성능을 만족하며, 수신감도, 다이나믹 레인지 등의 핵심 성능 향상을 위한 최적화된 알고리즘을 제안하고 수신기 복조부의 균일한 성능을 내기위해 신호레벨 튜닝 메커니즘을 구현하여 하드웨어 제작 공정에 따른 균일하지 못한 신호레벨 차이에 대한 수신율 문제를 최소화 하였다. 분석 결과 제안된 알고리즘은 우수한 성능을 나타냈으며, 이와 유사한 변조방법을 사용하는 시스템에 널리 응용이 가능할 것으로 사료된다.
임상검사실에서의 혈소판 수 계산은 지혈이상의 진단과 치료에 필수적이며, 혈소판 수가 적은 경우 혈소판 수혈이 필요하고 항암치료 후 혈소판 수 경과를 모니터링하는데 매우 중요하다. 정도관리는 환자결과를 내보내기 전에 검사실에서 오류를 줄이고 교정하는 과정이며 분절된 적혈구는 혈소판과 크기가 비슷하여 혈소판 수 계산에 영향을 미친다. 검사실에서 내부정도관리low QC물질이 2SD를 벗어난 것을 경험하였고, 지금까지 용혈과 혈소판 지표들과의 관계에 대해 밝혀진 것이 충분하지 않아 연구를 시작하였다. 이에 본 연구에서는 XN CHECK low level QC물질을 이용해 PLT-I, PLT-O, PLT-F 방법간의 혈소판 수치를 비교하였으며, 용혈검체를 만들어 5가지 혈소판지표들에 대해 비교분석 하였다. 그 결과PLT-F방법에서 CV값이 가장 적게 나타났으며, 용혈검체에서 P-LCR 수치가 18.4%에서 31.9%로 증가함을 보였다. 이 연구를 통해 혈소판 수치가 낮은 경우는 PLT-F방법으로 하는 것이 더 정확하며, 검체가 용혈이나 변질이 의심되는 경우 이를 평가할 때 P-LCR을 새로운 지표로 제시하고 있으며, 사람 혈액검체를 이용한 추후 연구가 더 필요할 것이라고 사료된다.
디지털변전소는 전력망 지능화를 위해 감시, 계측, 제어·보호, 운전 등 변전소를 구성하는 전력설비 기능과 통신방식을 국제표준인 IEC61850 기반으로 디지털화한 변전소를 말한다. 지능화된 운영시스템을 기반으로 효율적인 전력설비의 감시제어가 가능하며, 사고 발생 시 자동 복구 기능과 원격제어가 가능해 신속한 전력 장애 복구가 가능하다. 디지털 기술의 발달과 친환경 신재생에너지 및 전기차의 도입이 확대 되면서 직류 배전시스템의 보급이 확대될 전망이다. MVDC는 기존 송전계통에 적용되는 HVDC와 수용가에서의 LVDC 사이의 전압 레벨 및 전송용량을 갖는 직류 선로를 활용한 시스템이다. 대부분의 전력설비들이 교류 중심인 기존변전소의 기존 선로를 직류 선로로 변환하면 송전 손실 감소 및 더 큰 전류 용량이 확보된다. 디지털변전소의 프로세스 버스는 베이 레벨과 프로세스 레벨의 설치된 장치 간을 연결하는 이더넷스위치 등의 통신장비로 구성된 통신네트워크이다. 기존 디지털변전소에 MVDC 연계를 위해 프로세스 레벨을 교류부와 직류부로 나누어 두 개의 버스로 구성을 하였고 감시, 제어만 아니라 진단 IED와 연계되어 종합적으로 관리할 수 있는 시스템을 제안하였다.
An Altari radish pre-processing system, which feasible to process automatically such operations as leaf and root tail cutting and root peeling, for kimchi production was accomplished based on the foregone serial studies. In this study, the performances of the developed prototype machine, considered as a commercializing level, were analyzed and evaluated. The prototype machine attached Tiny PLC automatic control system was performed the sequent function as the rate of successful peeling was more than 98% for the Altari radish less than 70 mm diameter of a radish. The operating efficiency of this was 9 see/each, 128 kg/h, and it means as much as $5{\sim}6$ times that of a woman labor's. The sanitation and taste of the mechanized-processed Altari radish kimchi was almost same as that of the handmade. And they were suitable for manufactory of kimchi as the both short term ripening and storing kimchi. Developed machinery with one peeling device and two peeling devices that compared with hand processing, it was analyzed that the break-even yearly working days were 28 days and 19 days, and the break-even yearly processing amount were 28,700 kg, 32,400 kg, respectively.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.