• Journal of Electrical Engineering and Technology
• /
• 제8권5호
• /
• pp.969-974
• /
• 2013

Protection issues in distribution systems which are to be operated in open and closed-loop modes in a smart grid are studied and a generalized protection setting method is proposed to meet the new requirements. The developed setting method assumes a conventional over-current protection scheme for the system with reclosers and over-current relays. In a closed-loop mode, it identifies protective devices that have to be sacrificed in order to maximize protection coordination for bidirectional fault current flow. The proposed setting method has been tested on many systems with different complexity and is proved effective.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2021년도 학술발표회
• /
• pp.132-132
• /
• 2021

Access to accurate spatial precipitation in many hydrological studies is necessary. Existence of many mountains with diverse topography in South Korea causes different spatial distribution of precipitation. Rain gauge stations show accurate precipitation information in points, but due to the limited use of rain gauge stations and the difficulty of accessing them, there is not enough accurate information in the whole area. Weather radars can provide an integrated precipitation information spatially. Despite this, weather radar data have some errors that can not provide accurate data, especially in heavy rainfall. In this study, some location-based variable like aspect, elevation, plan curvature, profile curvature, slope and distance from the sea which has most effect on rainfall was considered. Then Automatic Weather Station data was used for spatial training of variables in each event. According to this, K-fold cross-validation method was combined with Adaptive Neuro-Fuzzy Inference System. Based on this, 80% of Automatic Weather Station data was used for training and validation of model and 20% was used for testing and evaluation of model. Finally, spatial distribution of precipitation for 1×1 km resolution in Gwangdeoksan radar station was estimates. The results showed a significant decrease in RMSE and an increase in correlation with the observed amount of precipitation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제4권4호
• /
• pp.633-654
• /
• 2010

High quality camera images, with good contrast and intensity, are needed to obtain the desired information. Images need to be enhanced when they are dark or bright. The histogram equalization technique, which flattens the density distribution of an image, has been widely used to enhance image contrast due to its effectiveness and simplicity. This technique, however, cannot be used to enhance images that are either too dark or too bright. In addition, it is difficult to perform histogram equalization in real-time using a general-purpose computer. This paper proposes a histogram equalization technique with AGC (Automatic Gain Control) to extend the image enhancement range. It is designed using VHDL (VHSIC Hardware Description Language) to enhance images in real-time. The system is implemented with an FPGA (Field Programmable Gate Array). An image processing system with this FPGA is implemented. The performance of this image processing system is measured.

• 한국통신학회논문지
• /
• 제39C권1호
• /
• pp.97-105
• /
• 2014

현재 제조, 유통산업에서는 입출고 운영결과를 수기 작성, 전산 입력 또는 엑셀파일에 의존하는 물류를 운영하고 있다. 이에 수기 입력 오류, 전산 입력 오류, 실시간 데이터 처리 불가, 수량 부족/초과 문제 발생과 같이 물류를 운영하는데 문제가 발생하고 있다. 이에 본 논문은 RFID 기술을 활용하여 입출고 데이터 처리를 통한 입고 자동 검수 시스템을 제안한다. 또한 실시간 데이터 처리 및 자동 검수를 통해 기존 물류 운영 대비 RFID를 적용한 시스템의 비용 절감효과를 제안한다. RFID 기술을 적용하여 입출고 데이터를 현장에서 실시간으로 처리할 수 있으며 수량 부족/초과 문제도 현장에서 바로 조치할 수 있게 된다. 그럼으로써 현재 운영 시스템 대비 RFID 시스템을 통해 물류비를 절감할 수 있다.

• 한국자동차공학회논문집
• /
• 제11권6호
• /
• pp.80-85
• /
• 2003

In the present paper, dynamics analyses of pressure control characteristics have been performed in a variable pressure solenoid valve. A number of solenoid valves have been used in the electronic control system, especially automatic transmission of an automobile. Variable pressure solenoid valve is intended to produce spatial movement by the electrical signal. Dynamics analyses of pressure control characteristics have been practiced by the Finite Difference Method, which show the pressure distribution in the solenoid valve. The results of numerical analyses show the dependence of pressure distribution on the displacement of the spool in the solenoid valve, and then, are compared with the experimental results.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 춘계학술대회 논문집
• /
• pp.321-323
• /
• 2009

When power failure occurs at multi-housing complex, auxiliary generator or emergency generator starts to provide power to households. This power is connected to emergency power ELB(Earth Leakage Breaker) at home distribution panel board and supplies power only for emergency light in living room but for heating system, refrigerator and other inevitable apparatuses that are in need of uninterruptible power. Since those domestic appliance are fed from common power line, they are inoperable during power failure. Our research is to resolve this problem by developing compatible relay-drive common/emergency-power ATS (automatic transfer switch) for home distribution panel board. In case of power failure, it transfers automatically and commences to provide power from emergency generator. Through this, Consumers can reach satisfaction where common power loads operate without any problem under both ordinary and power failure condition.

• KIEE International Transactions on Power Engineering
• /
• 제5A권3호
• /
• pp.293-299
• /
• 2005

Automatic reclosing is a typical protection method in power distribution systems for the clearing of temporary faults. However, it has a fatal weakness in regards to voltage sags because it produces repetitive voltage sags. In this paper, we explored the repetitive impact of voltage sag due to the automatic reclosing of power distribution systems. The actual tests of low voltage loads were carried out for obtaining the susceptibility of voltage sags. The final results of the tests yielded power acceptability curves of voltage sag, and the curves transformed the 3-dimensional CBEMA (Computer Business Equipment Manufacturer Association) format. For the quantitative evaluation of the impact of repetitive voltage sags, an assessment formulation using the voltage sag contour was proposed. The proposed formulation was tested by using the voltage sag contour data of IEEE standard and the results of the test. Through the case studies, we verified that the proposed method can be effectively used to evaluate the actual impact of repetitive voltage sags.

• 디지털융복합연구
• /
• 제11권3호
• /
• pp.181-187
• /
• 2013

공급자와 소비자간의 정보공유는 기능 중심에서 프로세스 중심이 되면서, 유연성과 고객 서비스를 극대화하기 위한 새로운 물류 개념을 요구하게 되었다. 다시 말하면 원부자재의 조달에서부터 생산을 거쳐 고객에게 판매되기까지의 전 과정에 걸친 개체간의 수요와 공급의 사슬관계를 의미하는 공급망 내에서 정보, 자금 그리고 물의 흐름을 관리 통제하는 공급사슬경영(SCM)이 사업의 핵심역량으로 인식되고 있다. 또한 국내 기업들의 수 배송 업무의 합리화는 국내 기업 물류관리의 가장 중요한 과제중의 하나로 부각되고 있다. 물류센터로부터 각 거래처로 물품을 배달하는 배송업무의 경우에는 기업의 물류정보시스템이 상류 중심의 데이터 체계로 구축되어왔기 때문에 물류관리 업무의 합리화에 활용할 수 있는 기초 데이터 부재와 현실적인 제약조건들을 고려한 효율적인 자동배차 알고리듬을 적용하지 못했기 때문에 배차담당자들의 수작업 조정시간이 장시간 소요되었다. 따라서 본 논문에서는 현실적인 다양한 제약조건을 만족하고, 수작업 조정시간이 대폭 줄이면서, 우편중심 좌표를 이용한 차량별 근거리 그룹핑으로 자동배차 지원시스템의 휴리스틱 알고리듬을 설계하도록 한다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2001년도 학술대회논문집
• /
• pp.51-58
• /
• 2001

This paper gives a type and high-frequency waves analysis of in-rush current cab be flowed into distribution automatic machine to be installed in distribution line in order to use minimizing operation error of failure indicator to have been issue recent with obtaining high-frequency component that can be different from current. The in-rush and fault current data studied in this paper is to be surveyed actually in USA distribution system substation line of Bryan Power Company near Texas A. M University, to be occurred high impedance fault.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 A
• /
• pp.156-158
• /
• 2000

This paper presents a efficient algorithm for loss reduction of distribution system by automatic sectionalizing switch operation in distribution systems of radial type. To apply genetic algorithm to reconfiguration of distribution system, in this paper we propose the string type and efficient reconfiguration procedure. We also discuss the more elaborate search techniques of solution space as well as the simple genetic algorithm. The experimental results show that the proposed genetic algorithm have the ability to search a good solution.