• 한국농공학회논문집
• /
• 제58권3호
• /
• pp.57-69
• /
• 2016

In this study, we analyzed the extreme rainfall distribution scenarios based on probable rainfall calculation and applying various time distribution models over the landslide high risk zones in urban areas. We used observed rainfall data form total 71 ASOS (Automated Synoptic Observing System) station and AWS (Automatic Weather Station) in KMA (Korea Meteorological Administration), and we analyzed the linear trends for 1-hr and 24-hr annual maximum rainfall series using simple linear regression method, which are identified their increasing trends with slopes of 0.035 and 0.660 during 1961-2014, respectively. The Gumbel distribution was applied to obtain the return period and probability precipitation for each duration. The IDF (Intensity-Duration-Frequency) curves for landslide high risk zones were derived by applying integrated probability precipitation intensity equation. Results from IDF analysis indicate that the probability precipitation varies from 31.4~38.3 % for 1 hr duration, and 33.0~47.9 % for 24 hr duration. It also showed different results for each area. The $Huff-4^{th}$ Quartile method as well as Mononobe distribution were selected as the rainfall distribution scenarios of landslide high risk zones. The results of this study can be used to provide boundary conditions for slope collapse analysis, to analyze sediment disaster risk, and to use as input data for risk prediction of debris flow.

• Spatial Information Research
• /
• 제6권1호
• /
• pp.65-76
• /
• 1998

대기오염을 관리하기 위해서는 대기오염 농도와 함께 대기오염 배출량의 공간분포가 정확히 산정되어야 한다. 기존의 대기오염 분포도에서는 토지이용 분류도의 해상도(rdsolution)가 낮아 같은 위치에서 오염원별 토지이용이 중복되었기 때문에 배출량의 정확한 공간분포를 산정할 수 없었다. 본 연구에서는 토지이용분류도를 고해상도(28.5m x 28.5m)로 작성하므로써 이것이 배출량의 공간분포 산정과 대기오염농도의 추정에 미치는 영향을 파악하였는데, 결과를 요약하면 다음과 같다. GIS를 이용하여 비교적 고해상도(28.5m x 28.5m)의 토지이용 분류도를 작성하므로써 점 및 선 오염원이 면 오염원과 동일한 지점에서 중보되지 않도록 토지이용을 효율적으로 반영할 수 있었다. 서울지역에 대해 기존으 방법으로 작성된 배출량 분포도와 본 연구에서 작성된 배출량 분포도를 이용하여 대기오염 농도를 추정(TCM-2모형을 이용)한 결과 본 연구에서 작성한 배출량 분포도에 의한 대기오염 농도의 추정지가 자동측정망의 실측치에 근접함을 알 수 있었다.

• 대기
• /
• 제23권4호
• /
• pp.413-424
• /
• 2013

Urban Heat Island (UHI) intensity is one of vital parameters in studying urban boundary layer meteorology as well as urban planning. Because the UHI intensity is defined as air temperature difference between urban and rural sites, an objective sites selection criterion is necessary for proper quantification of the spatial variations of the UHI intensity. This study quantified the UHI intensity and its spatial pattern, and then analyzed their connections with urban structure and metabolism in Seoul metropolitan area where many kinds of land use and land cover types coexist. In this study, screen-level temperature data in non-precipitation day conditions observed from 29 automatic weather stations (AWS) in Seoul were analyzed to delineate the characteristics of UHI. For quality control of the data, gap test, limit test, and step test based on guideline of World Meteorological Organization were conducted. After classifying all stations by their own local climatological properties, UHI intensity and diurnal temperature range (DTR) are calculated, and then their seasonal patterns are discussed. Maximum UHI intensity was $4.3^{\circ}C$ in autumn and minimum was $3.6^{\circ}C$ in spring. Maximum DTR appeared in autumn as $3.8^{\circ}C$, but minimum was $2.3^{\circ}C$ in summer. UHI intensity and DTR showed large variations with different local climate zones. Despite limited information on accuracy and exposure errors of the automatic weather stations, the observed data from AWS network represented theoretical UHI intensities with difference local climate zone in Seoul.

• 동력기계공학회지
• /
• 제4권3호
• /
• pp.25-33
• /
• 2000

This study represents three-dimensional turbulent flow characteristics around an axial fan measured at the operating point ${\varphi}=0.32$, which is equivalent to the maximum flowrate region, by using three-dimensional fiber-optic type LDA system. This LDA system is composed of a 5 W Argon-ion laser, two optics in back-scatter mode, three BSA's, a PC, and a three-dimensional automatic traversing system. A kind of paraffin fog is used for laser particles in this study. Mean velocity profiles around an axial fan along the downstream radial distance show that the streamwise and the tangential components exist as a predominant velocity and have the maximum value at the radial distance ratio 0.8, while the radial component has a small scale distribution and its flow direction is inward except a part of blade tip. The turbulent intensity profiles show that the radial component exists the most greatly. And also the turbulent kinetic energy shows about 60% as a maximum value at the radial distance ratio 0.9. Moreover, the Reynolds shear stresses do not exist at upstream flow, but the streamwise and the radial components of them show about 20% as a maximum value at the radial distance ratio 0.9 at downstream flow.

• 대한기계학회논문집
• /
• 제18권4호
• /
• pp.805-815
• /
• 1994

The development of automatic production systems has a trend toward Computer Integrated Manufacturing System(CIMS) in recent years. In hardware configuration, CIMS are composed of intelligent CAD/CAM work stations, multifunction CNC machining centers including material handling systems. The DNC systems present the key element of automation hierarchy in a FMS. A DNC system is one which connects a number of numerically-controlled machines to a common memory in a digital computer for part program storage with provision for on-demand distribution of part program data to machines using communication in hierarchical structure of central computer, control computer and cell controller. This paper describes the development of Behind-the-Tape-Reader(BTR) type DNC system using CYBER 180-830 as a central computer and IBM PC-386 cell control computer and NC lathe with FANUC 5T NC controller. In this system, the connection between central computer and cell control computer is done via RS-232C serial interface board, and the connection between cell control computer and FANUC 5T controller is done via parallel interface board. The software consists of two module, central computer communication module for NC program downloading and status uploading, NC machine running module for NC operating.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.780-791
• /
• 1996

A hybrid image processing system which automatically distinguished lean tissues in the image of a complex beef cut surface and generated the lean tissue contour has been developed. Because of the in homegeneous distribution and fuzzy pattern of fat and lean tissue on the beef cut, conventional image segmentation and contour generation algorithm suffer from a heavy computing requirement, algorithm complexity and poor robustness. The proposed system utilizes an artificial neural network enhance the robustness of processing. The system is composed of pre-network , network and post-network processing stages. At the pre-network stage, gray level images of beef cuts were segmented and resized to be adequate to the network input. Features such as fat and bone were enhanced and the enhanced input image was converted tot he grid pattern image, whose grid was formed as 4 X4 pixel size. at the network stage, the normalized gray value of each grid image was taken as the network input. Th pre-trained network generated the grid image output of the isolated lean tissue. A training scheme of the network and the separating performance were presented and analyzed. The developed hybrid system showed the feasibility of the human like robust object segmentation and contour generation for the complex , fuzzy and irregular image.

• 한국태양에너지학회 논문집
• /
• 제28권4호
• /
• pp.35-42
• /
• 2008

Besides genuine skin and clothes, it is called that building is third skin for us. That means the skin of buildings is the most important factor for our man-made environment. The issues in designing the building envelope include the insulation, infiltration, ventilation and bridging in windows. Getting light into the space safely and providing views to outdoor, additionally, are key things with the building envelope design. A deep-rooted preference for full view is still alive with large area of glass. Balcony expansion is legalized in apartment houses, which causes lots of environmental problems. Without balcony space, the adjacent space to unshaded window is exposed to the direct sun. A window can have many layers and the inner space can be utilized with an automatic blind system. Recently, the refurbished version of a double-glazed window system has been developed for the purpose of minimizing energy loss occurred around windows. For the better daylight control with equipped blind system, a set of adjustment technique of blind slats was tested in a mock-up building and recommended the detail operation. Not surprisingly, the optimized blind system can be oriented to enhance the uniformity in light distribution and direct glare from the sky as well..

• 한국지형학회지
• /
• 제26권2호
• /
• pp.69-84
• /
• 2019

The purpose of this study is to extract lineaments in the southeastern part of the Gaeum Fault System, and to understand their characteristics and a relationship between them and fault activation. The lineaments were extracted using a multi-layered analysis based on a digital elevation model (5 m resolution), aerial photos, and satellite images. First-grade lineaments inferred as an high-activity along them were classified based on the displacement of the Quaternary deposits and the distribution of fault-related landforms. The results of classifying the first-grade lineaments were verified by fieldwork and electrical resistivity survey. In the study area of 510 km², a total of 222 lineaments was identified, and their total length was 333.4 km. Six grade lineaments were identified, and their total length was 11.2 km. The lineaments showed high-density distribution in the region along the Geumcheon, Gaeum, Ubo fault, and a boundary of the Hwasan cauldron consisting the Gaeum Fault System. They generally have WNW-ESE trend, which is the same direction with the strike of Gaeum Fault System. Electrical resistivity survey was conducted on eight survey lines crossing the first-grade lineament. A low-resistivity zone, which is assumed to be a fault damage zone, has been identified across almost all survey lines (except for only one survey line). The visual (naked eyes) detecting of the lineament was evaluated to be less objectivity than the automatic extraction using the algorithm. However, the results of electrical resistivity survey showed that first-grade lineament extracted by visual detecting was 83% reliable for inferred fault detection. These results showed that objective visual detection results can be derived from multi-layered analysis based on tectonic geomorphology.

• 한국지능시스템학회논문지
• /
• 제25권1호
• /
• pp.7-14
• /
• 2015

고정밀도와 고속응성의 물류 이송을 위한 자동피킹 시스템 (Automatic Picking System; APS) 구동용 선형 유도 모터 드라이브의 설계 기법 및 고이득 관측기 기반의 강인 속도 제어 기법이 제안된다. APS에 존재하는 외란추력, 질량 및 마찰계수 등의 기계적 파라미터 불확정성은 시스템의 속도 제어 성능에 직접적인 영향을 주며 이러한 불확정성 하에서도 강인한 속도 응답 성능을 보유하는 속도 제어기가 요구된다. 시스템의 불확정성을 효과적으로 추정할 수 있는 고이득 관측기를 통해 외란이 추정되며 시스템의 불확정성을 제거하기 위해 추정된 외란이 제어입력에 전향제어 방식으로 보상된다. 기존의 외란 관측기가 질량 변화에 기인한 시변 외란을 효과적으로 보상하는 데에 한계가 있는 반면 제안된 속도 제어 시스템은 외란추력 및 질량 변화 하에서도 강인한 속도 추종 성능을 제공한다. 선형 유도 모터의 모델을 위한 Simulink 라이브러리가 상태방정식으로부터 개발되며 이를 활용한 Matlab - Simulink 기반의 비교 시뮬레이션을 통해 제안된 방식이 강인한 속도 응답 성능을 가지며 고정밀도와 고속응성을 요구하는 APS에 적합함이 입증된다.

• 한국산학기술학회논문지
• /
• 제9권5호
• /
• pp.1154-1163
• /
• 2008

배전자동화시스템(DAS:Distribution Automation System)과 변전자동화시스템(SCADA:Supervisory Control And Data Acquisition)은 전력계통을 컴퓨터와 통신기술을 이용하여 운용하는 주된 시스템으로, 현재 독립적으로 운영됨으로 인해 신속하게 처리되어야 하는 고장처리 및 활선작업처리가 지연되는 등의 문제점이 제기되어왔고, 이에 따라 DAS-SCADA 연계 연구가 요구되었다. 연계방법으로 직접연계, 웹연계, DAS 기능부 전력량계를 이용한 연계가 2005년 11월부터 2007년 12월까지 한전 사업소에서 시범 운영되었고, 그 결과 투자비용 면에서 직접연계방법이 웹연계 방법에 비해 약 1.3배 높지만 다양한 변전소 운전정보 전달의 신속성, 제어기능 우수 등의 타당성이 입증됨으로써 직접연계방법에 의한 DAS-SCADA 연계가 2010년까지 한전 사업소에 전국적으로 확대 적용될 계획이다. 시범 운영시 제기된 문제점을 개선하기 위해 변전소 개체별 통신 방법을 이용한 데이터 연계방안으로 개선하여 연계DB 자동구축 기능 및 연계시스템 진단/Log 기능을 개발하였다. 연계데이터 포인트와 통신데이터 종류를 정의하고, SCADA HMI 프로그램을 개발하여 변전소 단선도 자동생성 기능, 변전소 단선도 수동편집 기능, SCADA 감시 제어기능 및 이력관리 기능을 개발하였다. DAS-SCADA 연계시 정전건당 평균시간을 약 33% 단축하여 전력공급 신뢰도를 향상하고, 배전 계통운영센터와 변전소간 활선작업 처리절차 축소로 전력계통 효율적 운영에 기여하고, 나아가 고장시 부하절체 자동처리로 완전한 배전자동화 실현 및 해외 수출화 사업에도 크게 기여할 것으로 기대된다.