• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05b
• /
• pp.61-66
• /
• 1996

High pressure. high temperature steam/water blowdown test loop has been constructed. The loop simulates a pressurizer. depressurizalion system and In-Containment Refueling Water Storage Tank (IRWST) with full pressure and temperature conditions. and will be used to generate data for development of an optimal sparser as well as for design of safety/automatic depressurization system. In addition. experiments for reactor safety and pressurizer thermal hydraulics are scheduled. In this paper. general description of the Blowdown and Condensation (B&C) Loop will be given together with the test program.

• Journal of the Korea Computer Industry Society
• /
• v.3 no.8
• /
• pp.981-988
• /
• 2002

In this paper, a simple parallel compiler of a sequential loop is presented. This is a procedure for the automatic conversion of a sequential loop into a nested parallel DOALL loops at compile time. For this. the source program of Parafrase II parallel compiler is analyzed and a new general method the extracting parallelism in order to parallel processing effectively in nested loop is implemented.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.2
• /
• pp.149-149
• /
• 1999

This paper is to present a selected method of circuit parameters in the inverter part of the electronic dimming ballast for fluorescent lamps, that is adequate to use with the prevailing dimming controller IC. Through the experiment result using the prototype of the electronic dimming ballast produced by this method, its validity is verified from the electrical and light output characteristics on fluorescent lamps. Also, it is feasible to remote automatic and passive control fur dimming electronic ballast as using a microprocessor, and we easily recognize the lamp condition owing to make a program indicate abnormal behavior for fluorescent lamp at PC screen.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.3
• /
• pp.33-40
• /
• 1992

In this paper, We designed a 2-stage amplifier for transponder of satellite with dual GaAs FETs NE13783, and performed the worst-case analysis for circuit qualification in the space environment. The bandwidth of amplifier was chosen 11.7-12.2 GHz which is the down link frequency band for domestic Ku-band satellite communication, and the alumina substrate with 25 mil of thickness. The design and optimization of amplifier was achieved by the commercial CAD program TOUCHSTONE and the measurement was performed through the automatic network analyzer.

• Journal of the military operations research society of Korea
• /
• v.18 no.1
• /
• pp.32-46
• /
• 1992

One of the problems we frequently face during the ROK and US Combined operations is the English Military abbreviations because they often causes a lot of confusion. Many military abbreviations we generated, changed, and disappeared, so it is very hard to figure out their meaning sometimes. This system is designed to make it easier to register, alter, and find out English abbreviations through hypermedia techniques, which is utilizing nonsequential and direct search system similar to human sensory organs. So this enables us to keep up with the latest abbreviations. It is also designed to overcome mutual communications barriers by audio-visual aids through the graphic and phonetic functions of the program, and to test users via a random selection of questions.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.3
• /
• pp.242-248
• /
• 2010

In this paper, Verification of the qualitatively identical relationships existing between simulation data and experimental results allowed for a new analysis procedure of a planetary gear set -- in an automatic transmission -- to be conducted. Tooth profiles were found to be crucial to the gear mesh forces of the planetary gear set. Based on Kahraman's Model, dynamic resonances of the planetary gear set were found to be out of operating range. Most importantly, a 2DPLANETARY FEM program, an innovative design tool for planetary gear sets, was utilized.

• International conference on construction engineering and project management
• /
• 2005.10a
• /
• pp.808-813
• /
• 2005

Effective cost management requires reliable cost estimates at every stage of project development. The primary purpose of this research is to develop systematic modeling procedures and an automatic computing program for infrastructure estimating in the Texas Department of Transportation (TxDOT). The computing system toggles between project input information and segregated district unit prices for highway work item quantity estimates associated with earthwork and landscape, subgrade treatments and base, surface courses and pavement, structures, miscellaneous construction, and lighting, signing, markings and signals. This quantity-based approach was chosen because of the conventional approach lacking of quantity information until primary design is complete.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.30 no.1
• /
• pp.118-126
• /
• 2024

In this paper, the research contents and results related to the automation of the hull-form optimal design of container ships are summarized. A container ship is a ship that generally operates near Froude number of 0.26. To implement hull-form optimal design automation for ships operating at this speed, an optimization algorithm, a hull-form change algorithm, a ship performance prediction algorithm, an automation algorithm, and an iterative calculation technique were applied to develop a numerical analysis computer program that enables hull-form optimal design automation of the container ship, and it was named HOTCONTAINER. In this study, a sensitivity analysis algorithm was developed and applied to appropriately set design variables for hull-form optimal design. To understand the reliability and real ship applicability of the developed algorithm, a numerical analysis was performed on KCS(KRISO Container Ship), a container ship that has been studied in various ways worldwide. Consequently, the optimal ship was derived, and the wave resistance, wave pattern, and wave height of the target and optimal ship were compared. In conclusion, compared the target ship, the optimal ship a 47.63% decrease in wave resistance, and the displacement and wet surface area decreased by 0.50% and 0.39%, respectively.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.1
• /
• pp.29-35
• /
• 2014

This paper aims to obtain the effect of lightweight on Radius rod. The response surface method used in the paper is the statistical method. Optimization method is performed with the Radius rod using the lightweight material. Structural analysis is executed by using the ANSYS program to find static and dynamic responses. From this study result, it is verified that the response surface method has the advantage of optimum value in comparison with other optimization methods. The analysis is also performed by response surface method to derive optimal design values. Steel model and aluminium initial model are obtained by finite element analysis to clarify design criteria and the results are compared with three models each other. The weights can be reduced by optimal design analysis results of these models similar to those of existing products. The quantitative goals in this study can also attained through results of fatigue analyses. The reliability on optimal design of Radius rod can be improved by use of structural and fatigue analysis results.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.3
• /
• pp.115-121
• /
• 2016

A mackerel grader is a machine for sorting mackerel according to size. In this study, the dynamic deflection and optimal sorting simulation of a mackerel grader was carried out by using multi-body dynamics. To analyze the dynamic deflection of the roller, RecurDyn, a multi-body dynamics analysis program, was used. The dynamic deflection of the roller pipe was analyzed according to the inclination of the roller pipe. When the inclination of the roller pipe was 30 degrees, the roller indicated the maximum deflection of about 6.3 mm at the center of the mass. To simulate the mackerel sorting, the mackerel grader machine was modeled, and the contact simulation between the mackerel model and the rotating roller pipe was carried out. When the inclination of the roller frame was 7 degrees, the mackerel grader indicated optimal sorting performance.