• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.3
• /
• pp.365-369
• /
• 2015

In this paper, geographic information system(GIS) for an intelligent power distribution network was implemented with location informations acquired from automatic meter reading system, where the location informations of power line communication(PLC) modems installed at customer side were collected at data concentration units(DCUs) of headend equipment via PLC and then were transmitted to front end processor server. By displaying the connection status of the power distribution network on GIS map, operation of advanced metering infrastructure(AMI) or management of power grid system could be performed intuitionally and in real time, because the configuration state of the power grid could be easily monitored. The feasibility of the proposed system was confirmed with the especially constructed laboratory-level test bed and the verification test of the system will be carried out for a real power distribution network.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1996.04a
• /
• pp.70-77
• /
• 1996

Recently many efforts have been made to improve the efficiency of design and production of the structures using the automation system. But, this work has been progressed as independent or partial system. And, the study on the integrated system is not sufficient in application for practical problems yet. This paper deals with the fundamental concept of modeling system and application method on structural modeling. At first, the core of the integrated system is a shape modeling system that can represent the geometric and topological information. This system must be designed as an open system to be combined with each independent automation system. The appropriate concept to realize this system on structural modeling is object oriented modeling and this enables to integrate each automation system successfully, This concept was applied to automatic mesh generation. For shape modeling system, half-edge data structure that is being used in solid modeling was modified to handle the plate structure in the plane. And, to generate the triangular meshes, direct node connection method was used. And, as a result, the integrated system that generate the meshes of two dimensional structure automatically was realized. And, programmed by C++, these systems can be combined with other systems easily and have good reusability.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.5
• /
• pp.52-59
• /
• 2014

This paper presents an improved operating characteristics of squirrel-cage induction motor(IM) for 5-phase 1.5kW, 220V, 60Hz in order to study a polyphase AC machinery that keep hold of advantages more than traditional three-phase a IM, such as reducing a amplitude of torque pulsation, decreasing electric noises, and increasing the reliability. The developed manufacturing motor was necessary to do improvement of speed regulation, efficiency, operating characteristics, and so on at rated load. There are remake a redesigned and distributed stator winding connection without changing the frames of stator and rotor core in previous established the motor by a repeat tests. There are shown a experiments results of no-load test, locked rotor test, operating characteristics at variable load, FFT analysis of harmonics within output voltages and current waveform, decided motor parameters.

• Journal of Sensor Science and Technology
• /
• v.32 no.3
• /
• pp.187-193
• /
• 2023

Previous research has explored early expression of fire signs before the burning of insulation. To achieve this, typically, automatic inspections are used to detect gas emitted from odor capsules at electrical connection points; additionally, early fire signs can be expressed using visual inspection of changes in the appearance of temperature caps. However, early detection of electrical fire is often difficult because only specific inspections, which are not complex, are performed. Therefore, in this paper, we present complex inspection techniques, such as visual inspection, odor inspection, and automatic inspection, and propose a showing material of fire signs that can solve conventional problems. In addition, this study examines the conditions under which the candidate material for the showing material is designed, the composition of the candidate material selected based on the designed conditions, the manufacturing means used to produce the showing material considering the temperature for early expression of fire signs, and the performance of the produced showing material. Furthermore, we analyze various effects that can occur through the proposed display material.

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.12
• /
• pp.865-872
• /
• 2013

Two-level morphology analysis method is one of rule-based morphological analysis method. This approach handles morphological transformation using rules and analyzes words with morpheme connection information in a lexicon. It is independent of language and Korean Two-level system was also developed. But, it was limited in practical use, because of using very small set of lexicon built manually. And it has also a over-generation problem. In this paper, we propose an automatic construction method of Korean Two-level lexicon for PC-KIMMO from morpheme tagged corpus. We also propose a method to solve over-generation problem using lexical information and sub-tags. The experiment showed that the proposed method reduced over-generation by 68% compared with the previous method, and the performance increased from 39% to 65% in f-measure.

• Journal of the Korean Society for Library and Information Science
• /
• v.39 no.3
• /
• pp.139-163
• /
• 2005

Various corpus-based approaches, rhetorical roles of discourse structure, and unifications of similar sentences were applied to construct the automatic Ext/Sums(extracts and summaries). Rhetorical roles of sentences like objective, method, background, result, conclusion, etc. for making elastic Ext/Sums were established and extraction engines according to respective role were prepared. The $90\%$ of Success rate in extracting the important sentences of sample articles was accomplished. Rearranging the selected sentences, it used unification of similar sentences using the cosine coefficient equation, deletion of unnecessary modification and insertion clauses, junction of short sentences, and connection of sentences able to link. They suggest the methods applying rhetorical roles of sentences, meaning and signature of noun and verb in clauses, and cue words and location will be researched to construct the more effective Ext/Sums.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.5B
• /
• pp.539-548
• /
• 2011

We propose an efficient cooperative ARQ (Automatic Repeat reQuest) scheme for single-hop and multi-hop underwater acoustic communications, in which cooperative nodes are used to provide more reliable alternative paths for a specific source-to-destination connection. This alternative path has higher channel quality than that of the direct source-destination path. In addition, during a packet-relay through multiple hops, the typical acknowledgement (ACK) signal is replaced with overhearing data packet returned back from the next hop. The usage of overhearing as an ACK improves the system performance. In this paper, we evaluate the proposed scheme by comparing it with a conventional S&W ARQ in terms of throughput efficiency. Computer simulation results show that the proposed cooperative retransmission scheme can significantly improve the throughput by increasing the probability of successful retransmission.

• Phonetics and Speech Sciences
• /
• v.8 no.2
• /
• pp.31-39
• /
• 2016

In emergency dispatching at 119 Command & Dispatch Center, some inconsistencies between the 'standard emergency aid system' and 'dispatch protocol,' which are both mandatory to follow, cause inefficiency in the dispatcher's performance. If an emergency dispatch system uses automatic speech recognition (ASR) to process the dispatcher's protocol speech during the case registration, it instantly extracts and provides the required information specified in the 'standard emergency aid system,' making the rescue command more efficient. For this purpose, we have developed a Korean large vocabulary continuous speech recognition system for 400,000 words to be used for the emergency dispatch system. The 400,000 words include vocabulary from news, SNS, blogs and emergency rescue domains. Acoustic model is constructed by using 1,300 hours of telephone call (8 kHz) speech, whereas language model is constructed by using 13 GB text corpus. From the transcribed corpus of 6,600 real telephone calls, call logs with emergency rescue command class and identified major symptom are extracted in connection with the rescue activity log and National Emergency Department Information System (NEDIS). ASR is applied to emergency dispatcher's repetition utterances about the patient information. Based on the Levenshtein distance between the ASR result and the template information, the emergency patient information is extracted. Experimental results show that 9.15% Word Error Rate of the speech recognition performance and 95.8% of emergency response detection performance are obtained for the emergency dispatch system.

• Journal of Communications and Networks
• /
• v.12 no.1
• /
• pp.74-85
• /
• 2010

For the purpose of compromising hosts, attackers including infected hosts initially perform a portscan using IP addresses in order to find vulnerable hosts. Considerable research related to portscan detection has been done and many algorithms have been proposed and implemented in the network intrusion detection system (NIDS). In order to distinguish portscanners from remote hosts, most portscan detection algorithms use a fixed threshold that is manually managed by the network manager. Because the threshold is a constant, even though the network environment or the characteristics of traffic can change, many false positives and false negatives are generated by NIDS. This reduces the efficiency of NIDS and imposes a high processing burden on a network management system (NMS). In this paper, in order to address this problem, we propose an automatic portscan detection system using an fast increase slow decrease (FISD) scheme, that will automatically and adaptively set the threshold based on statistical data for traffic during prior time periods. In particular, we focus on reducing false positives rather than false negatives, while the threshold is adaptively set within a range between minimum and maximum values. We also propose a new portscan detection algorithm, rate of increase in the number of failed connection request (RINF), which is much more suitable for our system and shows better performance than other existing algorithms. In terms of the implementation, we compare our scheme with other two simple threshold estimation methods for an adaptive threshold setting scheme. Also, we compare our detection algorithm with other three existing approaches for portscan detection using a real traffic trace. In summary, we show that FISD results in less false positives than other schemes and RINF can fast and accurately detect portscanners. We also show that the proposed system, including our scheme and algorithm, provides good performance in terms of the rate of false positives.

• Journal of Korean Society of Archives and Records Management
• /
• v.17 no.4
• /
• pp.177-200
• /
• 2017

In a new technological environment such as big data and AI, LOD will link record information resources with various data from both inside and outside. At the heart of this connection is the interlinking technology, and interlinked LOD will realize the opening of record information as the highest level of open data. Given the ever-increasing amount of records, automation through interlinking algorithms is essential in building LODs. Therefore, this paper analyzed the structure of record information interlinking with the external data and characteristics of the record information to be considered when interconnecting. After collecting samples from the CAMS data of the National Archives, we constructed a record information's LOD. After that, we conducted a test bed that automatically interlinks the personal information of the record metadata with DBPedia. This confirms the automatic interlinking process and the performance and accuracy of the automation technology. Through the implications of the testbed, we have identified the considerations of the record information resources of the LOD interlinking process.