• Title/Summary/Keyword: Auto-tuning Control

Search Result 192, Processing Time 0.025 seconds

A Position Control of Robot Manipulator using Auto-tuning PID Controller (자기동조 PID제어기 설계를 이용한 로봇 매뉴플레이터의 위치제어)

  • 김영휘;임영도;최부귀;강신출;이인용
    • Proceedings of the Korean Institute of Intelligent Systems Conference
    • /
    • 2002.12a
    • /
    • pp.80-83
    • /
    • 2002
  • 정밀한 서보기술에 바탕을 두고 있는 산업용 로봇 팔은 기계적인 강성도와 서보기구들로 인하여 정확한 제어가 가능하다 그러나 로봇팔은 동작중비 관성모멘트의 변화와 기하학적인 구조로 인하여 비선형적인 시스템이다. 특히 관성모멘트의 변화는 로봇팔의 회전속도와 로봇팔이 이동시키는 대상물의 무게 등에 따라 관성모멘트는 변할 수 있다. 이로 인하여 관성모멘트의 변화에 따라 로봇팔의 정확한 위치제어가 힘들어진다. 따라서 본 논문에서는 관성모멘트의 변화에도 불구하고 강인한 응답특성을 나타내는 제어기의 설계가 요구된다. 일반적으로 PID .제어기는 설계의 용이성으로 산업현장에서 널리 사용된다. 그러나 PIB 제어기의 각 계수값을 설정하는데 많은 어려움이 발생한다. 따라서 본 논문에서는 PID 제어기의 각 계수 값을 퍼지알고리즘을 이용하여 자동으로 설계할 수 있는 자기동조 PID 제어기를 설계한다.

A Neuro Fuzzy Controller Using Auto-tuning Width of Membership Function for Equipment Systems (설비시스템을 위한 소속함수 폭의 자동동조를 사용한 뉴로퍼지 제어기)

  • 이수흠;방근태
    • The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.11 no.2
    • /
    • pp.102-109
    • /
    • 1997
  • The width of fuzzy membership function and control rule has an effect on performance of the fuzzy controller for electric equipment systems. In this paper, the neuro-fuzzy controller is proposed to im¬prove the performance of fuzzy controller. It has the width of membership function, that is adapted to the electrical parameter using multi-layer neural network, it is applied to first order electric power system with dead time and various plant constant. The related simulation resolts show that the pro¬posed neuro fuzzy controller are superior characteristics of improved performance

  • PDF

A Proposal for Exciter current control with auto-tuning technique (오토튜닝 기법을 이용한 여자기 전류제어기법 제안)

  • Oh, Bong-Rok;Kang, Seong-Hyun;Kim, Gwang-Heon;Choi, Joon-Ho;Park, Sung-Jun
    • Proceedings of the KIPE Conference
    • /
    • 2012.07a
    • /
    • pp.594-595
    • /
    • 2012
  • 산업용 발전기의 경우 시판되고 있는 발전기의 용량이 다양하다. 각 용량에 따라 내부 임피던스가 틀려, 하나의 제어기로 각기 다른 용량을 제어를 하는데 어려움이 있었다. 본 논문에서는 여자기의 내부 임피던스를 자동으로 계산하여 하나의 제어기로 각기 다양한 용량을 가진 발전기의 여자기의 전류를 제어하는 방법을 제안한다.

  • PDF

Design and Performance Analysis of an Active QoS Allocation Scheme for large File Transfer (대용량 파일 전송을 위한 능동적인 QoS 제공 방안의 설계 및 성능분석)

  • 김국한;이만희;변옥환;유인태
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2003.04d
    • /
    • pp.283-285
    • /
    • 2003
  • 슈퍼컴퓨터 사용자들은 FTP(File Transfer Protocol)을 이용해서 대용량의 파일을 전송한다. 전송되는 데이터들은 승용차나 비행기 설계, 의약품 개발. 기상 예보 그리고 복잡한 수학적 계산 등과 같이 다양한 분야에 걸친 연구관련 데이터로서 고성능 슈퍼컴퓨터에 의한 연산 처리가 요구된다 기존의 FTP 는 네트워크 상태에 따라 전송 지연이나 데이터 손실 등의 문제로 사용자의 불편을 초래하였다. 이에 전송 성능을 효율적으로 높이고 데이터 손실을 최소화를 제공하는 연구가 필요하다. 근래의 TCP (Transmission Control Protocol) 성능 향상 연구에 관한 연구들의 관심은 크게 두 가지이다. 하나는 윈도우 사이즈 조절(auto-tuning)이고, 다른 하나는 Multi-stream 이다. 본 연구에서는 파일 전송 성능 향상을 위한 방법으로 윈도우 사이즈 조절 방법을 사용하였고, 네트워크 상태에 따라 QoS(quality of Service)를 제공한다. 이런 성능 향상 결과로 신뢰성 있는 네트워크를 제공하여 사용자들은 신속하게 데이터를 전송하며 연산처리 결과가 더욱 정확하다고 신뢰할 수 있다. 본 고에서는 대용량 파일을 전송 할 때 성능을 향상시키는 관련 연구를 알아보고 대용량 파일 전송 중 네트워크 상태에 따라 005를 능동적으로 작용하여 테스트하고 성능을 분석하였다.

  • PDF

Hybrid Fuzzy Controller Using GAs Based on Control Parameters Estimation mode (제어파라미터 추정모드기반 GA를 이용한 HFC)

  • Lee, Dae-Keun;Oh, Sung-Kwun;Jang, Sung-Whan
    • Proceedings of the KIEE Conference
    • /
    • 2000.11d
    • /
    • pp.700-702
    • /
    • 2000
  • The new design methodology of a hybrid fuzzy controller by means of the genetic algorithms is presented. In fuzzy controller which has been widely applied and used. in order to construct the best fuzzy rules that include adjustment of fuzzy sets, a highly skilled techniques using trial and error are required. To deal with such a problem, first, a hybrid fuzzy controller(HFC) related to the optimal estimation of control parameters is proposed. The HFC combined a PID controller with a fuzzy controller concurrently produces the better output performance than any other controller from each control output in steady state and transient state. Second, a auto-tuning algorithms is presented to automatically improve the performance of hybrid fuzzy controller, utilizing the simplified reasoning method and genetic algorithms. In addition, to obtain scaling factors and PID Parameters of HFC using GA, three kinds of estimation modes such as basic, contraction, and expansion mode are effectively utilized. The HFCs are applied to the first-order second-order process with time-delay and DC motor Computer simulations are conducted at step input and the performances of systems are evaluated and also discussed from performance indices.

  • PDF

Auto - tuning of PID Controllers with IMC Structure (IMC 구조를 갖는 PID 제어기의 자동 동조)

  • Cho, Joon-Ho;Hwang, Hyung-Soo
    • Journal of the Institute of Electronics Engineers of Korea SC
    • /
    • v.46 no.3
    • /
    • pp.8-14
    • /
    • 2009
  • In this paper, it is proposed that the design of the PID controller with the internal model control structure for improved performance. Internal model was identification that is second-order plus dead time structure using final-value theorem and genetic algorithm The parameters of Controller are determined to minimize IAE(Integral of the Absolute value of the Error) and ITAE(Integral of the Time multiplied by the Absolute value of the Error) of performance index by internal model and numerical method. Simulation examples are given to show the better performance of the proposed method than conventional methods.

Auto-tuning of PID controller using Neural Networks and Model Reference Adaptive control (신경망을 이용한 PID 제어기의 자동동조 및 기준모델 적응제어)

  • Kim, S.T.;Kim, J.S.;Seo, Y.O.;Park, S.J.;Hong, Y.C.
    • Proceedings of the KIEE Conference
    • /
    • 2000.07d
    • /
    • pp.2299-2301
    • /
    • 2000
  • In this paper, the design of PID controller using Neural networks for the control of non-linear system is presented. First, non-linear system is identified using BPN(Backpropagation Network) algorithm. This identified model is connected to the PID controller and the parameters of PID controller are updated to the direction of reducing the difference between the identified model output and model reference output in arbitrary input signal. Therefore, identified model output tracks the model reference output in an acceptable error range and the parameters of controller are updated adaptively. The output of the system has a good performance in case of both noisy and noiseless model reference and we can control the system stable in off-line when the dynamics of the system is changed.

  • PDF

Identification of the Mechanical Resonances of Electrical Drives for Automatic Commissioning

  • Pacas Mario;Villwock Sebastian;Eutebach Thomas
    • Journal of Power Electronics
    • /
    • v.5 no.3
    • /
    • pp.198-205
    • /
    • 2005
  • The mechanical system of a drive can often be modeled as a two- or three-mass-system. The load is coupled to the driving motor by a shaft able to perform torsion oscillations. For the automatic tuning of the control, it is necessary to know the mathematical description of the system and the corresponding parameters. As the manpower and setup-time necessary during the commissioning of electrical drives are major cost factors, the development of self-operating identification strategies is a task worth pursuing. This paper presents an identification method which can be utilized for the assisted commissioning of electrical drives. The shaft assembly can be approximated as a two-mass non-rigid mechanical system with four parameters that have to be identified. The mathematical background for an identification procedure is developed and some important implementation issues are addressed. In order to avoid the excitation of the system with its natural resonance frequency, the frequency response can be obtained by exciting the system with a Pseudo Random Binary Signal (PRBS) and using the cross correlation function (CCF) and the auto correlation function (ACF). The reference torque is used as stimulation and the response is the mechanical speed. To determine the parameters, especially in advanced control schemes, a numerical algorithm with excellent convergence characteristics has also been used that can be implemented together with the proposed measurement procedure in order to assist the drive commissioning or to achieve an automatic setting of the control parameters. Simulations and experiments validate the efficiency and reliability of the identification procedure.

Transient State Improvement of Three-Phase ZSI with the Input Feedforward and Fuzzy PI Controller (입력 피드포워드와 퍼지 PI제어기를 갖는 3상 ZSI의 과도상태 개선)

  • WU, Yan-Jun;Jung, Young-Gook;Lim, Young-Cheol
    • Proceedings of the KIPE Conference
    • /
    • 2012.07a
    • /
    • pp.359-360
    • /
    • 2012
  • This paper proposes a scheme of auto-tuning fuzzy PI controller and input voltage feed forward to control the output voltage of a three-phase Z-source inverter (ZSI). The proposed scheme adjusts the ts (Kp and Ki) in real time in order to find the most suitable Kp and Ki for PI controller and to simplify the controller design. The proposed scheme is verified the validity by experiment and co-simulation in PSIM and MATLAB/SIMULINK both load step change and input DC voltage variation in Z-source inverter, and has compared with the conventional PID control scheme. The experiment results involve of three-phase output voltage, Z-network capacitor voltage and dc-link peak voltage value. By those analysis and comparison, the availability of the proposed method in output voltage transient response quality improving has been verified. Compared with conventional PID method, the proposed method showed a more effective and robust control performance for coping with the severe disturbance conditions.

  • PDF

The Design of an Auto Tuning PI Controller using a Parameter Estimation Method for the Linear BLDC Motor (선형 추진 BLDC 모터에 대한 파라미터 추정 기법을 이용하는 오토 튜닝(Auto Tuning) PI 제어기 설계)

  • Cha Young-Bum;Song Do-Ho;Koo Bon-Min;Park Moo-Yurl;Kim Jin-Ae;Choi Jung-Keyng
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.10 no.4
    • /
    • pp.659-666
    • /
    • 2006
  • Servo-motors are used as key components of automated system by performing precise motion control as accurate positioning and accurate speed regulation in response to the commands from computers and sensors. Especially, the linear brushless servo-motors have numerous advantages over the rotary servo motors which have connection with the friction induced transfer mechanism such as ball screws, timing belts, rack/pinion. This paper proposes an estimation method of unknown motor system parameters using the informations from the sinusoidal driving type linear brushless DC motor dynamics and outputs. The estimated parameters can be used to tune the controller gain and a disturbance observer. In order to meet this purpose high performance Digital Signal Processor, TMS320F240, designed originally for implementation of a Field Oriented Control(FOC) technology is adopted as a controller of the liner BLDC servo motor. Having A/D converters, PWM generators, rich I/O port internally, this servo motor application specific DSP play an important role in servo motor controller. This linear BLDC servo motor system also contains IPM(Intelligent Power Module) driver and hail sensor type current sensor module, photocoupler module for isolation of gate signals and fault signals.