• Journal of Korean Society for Atmospheric Environment
• /
• v.13 no.6
• /
• pp.463-474
• /
• 1997

Metallic elements in dustfall have been known as notable air pollutants directly or indirectly influencing human health and wealth. The first aim of this study was to obtain precise spatial distribution patterns of 5 elements (Pb, Zn, K, Cr, and Al) in dustfall around Suwon area. To predict isometric lines of metal fluxes deposited on unsupervised random sites, the study has applied both spatial statistics as a receptor model and a GIS (geographic information system). Total of 31 sampling sites were selected in the study area (roughly 3 by 3 km grid basis) and dustfall samples were then collected monthly basis by the British deposit gauges from Dec., 1995 to Nov., 1996. The metallic elements in the dustfall were then analyzed by an atomic absorption spectrometer (AAS). On the other hand, a base map overlapped by 7 layers was constructed by using the AutoCAD R13 and ARC/INFO 3.4D. Four different spatial interpolation and expolation techniques such as IDW (inverse distance weighted averaging), TIN (triangulated irregular network), polynomial regression, and kriging technique were examined to compare spatial distribution patterns. Each pattern obtained by each technique was substantally different as varing pollutant types, land of use types, and topological conditions, etc. Thus, our study focused intensively on uncertainty analysis based on a concept of the jackknife and the sum of error distance. It was found that a kriging technique was the best applicalbe in this study area.

• Journal of Engineering Education Research
• /
• v.13 no.5
• /
• pp.8-14
• /
• 2010

This study intends to study about the blade performance loss occurred due to the variation in the shape of an airfoil from attachment/non-attachment of an erosion shield for the hovercraft. The model in this study has used NACA44XXseries, has designed NACA44XX-series by using the Auto CAD, and it designed the shape that has attached an erosion shield to this model according to the thickness and length. By using these models, a grid was generated by GAMBIT and the lift coefficient ($C_l$) and the drag coefficient ($C_d$) were calculated FLUENT code for flow analysis. Through this, the $C_l$ and $C_d$ have calculated and compared the lift-to-drag ratio that an indicator of airfoil performance according to the shape and attachment/non-attachment of erosion shield.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.494-498
• /
• 2005

In order to design the aspherical lens, the revisions and the steps of the mathematical method are influenced with a lot of variables. The accuracy of the aspherical lens can be changed by these variables. Besides, to design the aspherical lens, many mathematical functions should be used. To use these mathematical functions is protected by patent administration. Therefore it is very difficult for most of developed countries to use them. This fact has been interrupting not only the development of the technique of a design of the aspherical lens but also the development of the equipments of optics. Because approximate values are used in most of common programs which create the aspherical lens : basically these common programs have variations. Therefore these aspherical lens are not accurate. In the paper, we calculated accurate values by using the refractive index of lens. Based on these data, wee created self-operating design programs. Consequently, our lens is more accurate than the aspherical lens which is created by the common programs influenced with approximate values. The used programs belonging to AutoCAD is Visual LISP.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.2
• /
• pp.195-202
• /
• 2002

An automated process planning system for cold forging of non-axisymmetric parts of comparatively simple shape was developed in this study. Programs for the system have been written with Visual LISP in the AutoCAD using a personal computer and are composed of four main modules such as input module, shape cognition and shape expression module, material diameter determination module and process planning module. The design rules and knowledges for the system are extracted from the plasticity theories, handbook, relevant reference and empirical knowledge of field experts. Generally, in forging, only front view is needed for expression of axisymmetric parts, but non-axisymmetric parts need front and plane view. At the plane, this system cognizes the external shape of non-axisymmetric, parts - number of sides of regular polygon and radius of a circle circumscribing the polygon of n sides. At the front view, the system perceives diameter of axisymmetric portions and height of primitive geometries such as polygon, cylinder, cone, concave, convex, etc.

• Transactions of Materials Processing
• /
• v.24 no.4
• /
• pp.234-240
• /
• 2015

Multi-pass shape drawing is very important to produce steel profiles in round samples. In the current study, a process design system is developed for a multi-pass shape drawing. In general, the number of passes for a multi-pass shape drawing is 2 to 3 when the reduction ratio, drawing stress, and productivity are considered. Therefore, calculating the drawing stress and designing the intermediated die shapes are very important. In order to calculate the drawing stress, a shape drawing load prediction method is proposed using a general axisymmetric drawing load prediction model. An intermediate die shape design method is proposed using the initial and the final product shapes. Based on this analysis, a process design system is developed for multi-pass shape drawing for steel profiles. The system works with AutoCAD. The system was applied to design a shape drawing of a spline.

• Journal of Welding and Joining
• /
• v.33 no.2
• /
• pp.78-84
• /
• 2015

Self-piercing rivet(SPR) is mechanical joining methods and which can be joining dissimilar materials. Unlike conventional riveting, SPR also needs no pre-drilled holes. During plastically deformation, SPR pierces upper sheet and joins it to under sheet. SPR has been mainly applied to the joining the automobile body and some materials, such as glass fiber reinforced polymer and aluminum alloy, which represent the sheet-formed materials for lightweight automobile. Glass fiber reinforced plastic(GFRP) has been considered as a partial application of the automobile body which is lighter than steels and stronger than aluminium alloys. It is needed SPR to join Al alloy sheets and GFRP ones. In this paper, in order to design the rivet and anvil, which are suitable for GFRP, the joinability was examined through simulations of SPR joining between GFRP and Al alloy sheets. For this study, AutoCAD was used for the modeling and the simulated using commercial FEM code DEFORM-2D. The simulated results for SPR process joining between GFRP and Al alloys were confirmed by the same conditions as experimental trials.

• Journal of Korean Society of Rural Planning
• /
• v.9 no.4 s.21
• /
• pp.43-51
• /
• 2003

This study aims to integrate the simulation models for rural settlement planning (SimRusep) in the district level (Myon) area of rural counties. The SimRusep, which has two modules of key villages selection and spatial planning for the selected villages, consists of four sub-models such as the spatial location-allocation model of center villages (SLAMCV), the potential centrality evaluation model (PCEM), the land use planning model (LUPM), and the 3-dimensional spatial planning modeller (3DSPLAM). Basically, map data of the integrated system which can be operated on the UNIX environment is inputted and treated using GIS (ARC/INFO) and then its village planning results is graphically presented on the AutoCAD. In order to verify the practical applicabilities of the SimRusep, an administrative area, Ucheon-myun, HoengSung-gun, KangWon-do, was selected as a case study area. It was well operated in the strategic application trials considering application of each sub-model in the study area. The operation results of the SimRusep showed the possibilities of realtime simulation from the selection of key village to its final stereoscopic presentation of planned results. Alternative village plan proposals can be swiftly drafted, which means very practical support for decision making process and public participation.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.8
• /
• pp.64-70
• /
• 2001

In all the Rapid Prototyping (RP) techniques, the computer-aided design (CAD) model of a three-dimensional part is sliced into horizontal layers of uniform, but not necessarily constant, thickness in the building direction. Each cross- sectional layer is successively deposited and, at the same time, bonded onto the previous layer. The stacked layers form a physical part of the model. The objective of this study is to develop a software for automatic generation of unit shape part(USP) for a new RP process, Variable Lamination Manufacturing using the linear hotwire cutting technique and expandable polystyrene foam sheet as part material(VLM-S). In order to examine the applicability of the developed software to VLM-S, USPs of general three-dimensional shapes, such as an auto-shift lever knob and a pyramid shape were generated.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.11
• /
• pp.2047-2053
• /
• 2008

Auto-ID industries and their services have been improved since decades ago, and radio frequency identification (RFID) has been contributing in many applications. Product management can be the foremost example. In our industrial experiences, RFID in ultra high frequency (UHF) band provides much longer interrogation ranges than that of 13.56MHz; many more applications exist thereby. There should be several interesting and useful ideas on UHF RFID; however, those ideas can be limited due to the inevitable environmental circumstances that restrict the interrogation range in shorten value. This paper discusses the propagation interference among different types of readers (e.g, mobile RFID readers in stationary reader zone) in dense-reader environment. In most cases, UHF RFIDs in Korea will be dependent on the UHF mobile RFIDs. In this sense, the UHF mobile users accidently move into the stationary reader's interrogation zone. This is serious problem. In this paper, we analyze propagation loss and propose the effective channel allocation scheme that can contribute developing less-invasive UHF RFID networks. The simulation and practical measurement process using the commercial CAD tools and measurement equipments are presented.

• Journal of Mechanical Science and Technology
• /
• v.18 no.6
• /
• pp.904-914
• /
• 2004

The fiber reinforced composite material is widely used in the multi-industrial field because of their high specific modulus and specific strength. It has two main merits which are to cut down energy by reducing weight and to prevent explosive damage proceeding to the sudden bursting which is generated by the pressure leakage condition. Therefore, Pressure vessels using this composite material can be applied in the field such as defence industry and aerospace industry. In this paper, for nonlinear finite element analysis of E-glass/epoxy filament winding of composite vessel subjected to internal pressure, the standard interpretation model is developed by using the ANSYS with AutoLISP and ANSYS APDL languages, general commercial software, which is verified as useful characteristic of the solution. Among the modules of the system, both the process planning module for carrying out the process planning of filament wound composite pressure vessel and the autofrettage process module for obtaining higher residual stress will minimize trial and error and reduce the period for developing new products. The system can serve as a valuable system for experts and as a dependable training aid for beginners.