• 한국기계가공학회지
• /
• 제6권3호
• /
• pp.3-8
• /
• 2007

This study is for aspheric lens that is one of a core technology in the optical industry. The feature of a aspheric lens is not to have the spheric aberration. So in optical industry, aspheric lens are essential element to miniaturization, high effectiveness and light weight. In this study we applied a lay back-tracer method using the index of refraction to design aspheric lens. We developed the automatic design program for aspheric lens by user interfacing program VisualLISP in AutoCAD. And we manufactured aspheric lens and measured it.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1992년도 춘계학술대회 논문집
• /
• pp.297-300
• /
• 1992

For the most part of machine design, assembly drawing isaffected byits inserted parts. When a part is inserted in assembly, alreadyd stablished parting line is modified for reasonable representation. for example, break or trim fuction between the lines gives more recognizable drqwing. Most of parts is composed of such that point, line, arc, circle and block. If the part is composed of block, it is very difficult to operate because its attribution is unknown before exploding, but, It is very easy to operate except block. In this paper, it is required that basic feature recognition rules are caused by knowledge-based. This system which shows a good modify tool using AutoCAD system and ADS (Autocad Development System).

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.753-756
• /
• 2000

The accumulated know-how and trial-and-error procedures are known as the best ways to determine blank shape and dimensions. One of the most important steps to determine the blank shape and dimensions in deep drawing process is to calculate the surface area of the product. In general, the surface area of products is calculated by mathematical or 3-D modeling methods. A blank design system is constructed for elliptical deep drawing products to recognize the geometry of the product in the long side and short side by drafting in another two layers on AutoCAD software. This system consists of input geometry recognition module, 3-D modeling module and blank design module, respectively. Blank dimension of three types is determined by the same area, which was acquired in 3-D modeling module. The suitability of this system is verified by applying to a real deep drawing product.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 추계학술대회 논문집
• /
• pp.33-37
• /
• 2000

Milling fixture is one kind of machining device according to the industrial demands for multi manufacturing products on the growing at alarming rate. In the field of design and making for machine tool working, welding, assembling with fixture for mass production is a specific division. In order to prevent the production defects, occurring, the optimum design of product, fixture putting in the field is very significant manufacturing method. They require analysis of many kinds of important factors, theory and practice of machine tool operating process and its situations, fixture and its structure, machining condition for tool making tool materials, heat treatment of fixture components, know-how and so on. In this study we designed and constructed a milling fixture of mass production and performed tryout under the AUTO CAD, database, I-DEAS and WINDOW environment. Especially part 1 of this study is reveals with the analysis of part drawing, fixture planning, fixture design etc.

• 한국기계가공학회지
• /
• 제2권2호
• /
• pp.45-51
• /
• 2003

The multi-piloting type progressive die for U-bending sheet metal production part is a very specific division. This study reveals the sheet metal forming process with multi-forming die by center carrier type feeding system. Through the FEM simulation by DEFORM, it was accepted to u-bending process as the first performance to design of strip process layout. The next process of die development was studied according to sequence of die development, i.e die structure, machining condition for die making, die materials, heat treatment of partially die components, know-how and so on. The feature of this study is the die development of scrapless progressive die of multi-stage through the modeling on the I-DEAS program, components drawing on the Auto-LISP, CAD/CAM application, ordinary machine tool operating and revision by tryout.

• 한국산학기술학회논문지
• /
• 제4권4호
• /
• pp.418-421
• /
• 2003

본 논문에서는 오리 사육장치를 제작하기 위하여 오리의 습성에 맞게 사육장치를 설계하였다. 또한 오리의 먹이는 음식물쓰레기로 하고, 오리의 분뇨는 컨베이어 벨트로 수거하여 지렁이의 먹이로 사용함으로서 음식물 쓰레기를 줄이고, 지렁이에 의한 분변토를 얻을 수 있어 환경오염을 줄일 수 있는 새로운 시스템을 설계하였다. 사육장치의 프레임은 3차원 유한요소해석 코드인 ANSYS로 구조해석을 실시하여 안전성을 검토하였다.

• 대한전기학회논문지
• /
• 제39권2호
• /
• pp.119-132
• /
• 1990

To design protection coordination for an electric power distribution system, an expert system is developed, using both the veteran expert's heuristics and the guide book for the distribution facility operation considering feeder configuration, service route, load characteristics fault current and load current. The expert system developed in this papaer determines the type of protective device(clearing current and sequence). The location and rating change of protective device in the old feeder is realized by using old database. Current(T-C) curves of various kinds of protective devices are stored in Knowledge Base (KB). The expert system is developed on a 32 bit personal computer using PROLOG, AutoCAD,dBASEIIIPLUS and FORTRAN. To compute the fault current and loadflow, FORTRAN is used.

• Design & Manufacturing
• /
• 제2권1호
• /
• pp.27-31
• /
• 2008

The object of this study is a manufacture of buff die using CAM systems. Systems are consist of AutoCAD, CAM software and CNC milling machine. CAM software is purpose of G-code generation for CNC programming. Then CAM software and CNC milling machine are connect to RS-232-C cable for networking.

• 동력기계공학회지
• /
• 제6권2호
• /
• pp.24-32
• /
• 2002

A program is developed to analyze and design the frequency and rigidity of the corrugated plates with various corrugation shapes (the considered corrugation shapes are triangular and trapezoidal) and 36 kinds of boundary conditions using smeared theory. The system is consisted of input, solution and output routines, and its routine is made up pull-down menu type and run in Window basis using Visual Basic Language. The input routine helps the design engineers to make the input data user-friendly. The solution routine uses the homemade solver. In the output routine, automatic designs can be done using AutoCAD and Intent Tool package by interfacing the input data.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2004년도 학술발표회
• /
• pp.496-499
• /
• 2004

컴퓨터와 다양한 software의 보급과 함께 흐름의 수치해석 분야는 급속한 발전을 보게 되었고 고도의 수치해법이나 복잡한 경계 처리 등을 통해 실제현상과 같은 흐름해석을 가능케 하고 있으며, 이러한 수치해석을 위해 정확한 Bathymetry는 필수적이다. 본 연구에서는 등 격자간격의 수심도 생성을 위하여 전자해도를 작업에 적합하게 수정하고 부족한 조간대의 수심자료는 보완하고, 파일형식에 따른 적절한 프로그램밍 언어를 통하여 해도상 지점들의 수심자료를 획득하고 내삽하여 기존에 사용되는 방법에 비하여 비교적 간단하고 해도의 정보를 정확하게 반영하는 Bathymetry를 생성하는 기법을 제안하였다.