• 자동차안전학회지
• /
• 제13권2호
• /
• pp.24-29
• /
• 2021

In order to prevent automobile accidents internationally, advanced safety devices are actively being developed. Among them, Auto Emergency Brake (AEB) function and Forward Collision Warning (FCW), which are used to prevent or reduce frontal collision, have been studied for a long time, and are being researched by various manufacturers to develop better performance. In fact, in the case of large vehicles, it is mandatory for AEB to be installed in Korea. Accordingly, a variety of Vehicles equipped with AEB and FCW are coming out, and inspection of these mounting devices is a necessary system in the future. This study confirms how AEB and FCW are currently assessed in regulation and the New Car Assesment Program (NCAP), This is a basic study of the matters to be considered in preparing AEB and FCW inspection standard by checking the performance of vehicles equipped with forward collision protection and identifying the vehicle's sensitivity, range and speed of radar sensors, and target vehicles based on CAN communication data.

• 제어로봇시스템학회논문지
• /
• 제14권5호
• /
• pp.432-437
• /
• 2008

This paper proposes a defect cell extraction algorithm for TFT-LCD auto-repair system. Auto defect search algorithm and automatic defect cell extraction method are very important for TFT-LCD auto repair system. In the previous literature[1], we proposed an automatic visual inspection algorithm of TFT-LCD. Based on the inspected information(defect size and defect axis, if defect exists) by the automatic search algorithm, defect cells should be extracted from the input image for the auto repair system. For automatic extraction of defect cells, we used a novel block matching algorithm and a simple filtering process in order to find a given reference point in the LCD cell. The proposed defect cell extraction algorithm can be used in all kinds of TFT-LCD devices by changing a stored template which includes a given reference point. Various experimental results show the effectiveness of the proposed method.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.673-674
• /
• 2008

• 자동차안전학회지
• /
• 제10권4호
• /
• pp.13-24
• /
• 2018

According to DEKRA (a Germany Certification and Inspection Agency)'s accident rate analysis by vehicle defect factor, as a result of analysis of the causes of accidents by flaws, it was found that braking devices accounted for 41%. Defects in the braking system are closely related to the accident, so it is very important to find faulty brking systems to ensure safety. The EU and USA uses ISO brake tester and the Korea is brake teater is first introduse in Japan for vehicle inspection and maintanance. KOTSA introduce the ISO brake tester in order to promote the advanced standardization of the inspection equipment and inspection tecnology, and examined the detection characteristics and applied it to the improvement direction of the brake tester to secure the driving safety.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.146-148
• /
• 2002

An automatic inspection vision systems whose development was the industry applications motor rear side member. This system are connected to the 9 ea camera fur the process inspection the bolt, nuts, units in the rear side member product. This automatic inspection vision systems can perform inspection of not attached the bolt, nuts, units, etc fast and accuracy in react time fashion. And then perform very sophisticated inspection which human workers can not perform.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.106-106
• /
• 2000

This study is to embody automatic inspection system of motor body panel by visual system. since it is inefficient to examine the adhesion condition of components with the naked eye, picture processing algorithm is presented to replace the existing manual inspection process with an automatic inspection process. The developed automatic inspection system presents the examination method of the adhesion condition of components with a ixed camera, which leads to an increase of the productivity and a reduction of manufacturing cost.

• 한국구조물진단유지관리공학회 논문집
• /
• 제8권4호
• /
• pp.223-230
• /
• 2004

도심지의 흙막이 공사에서 앵커의 인장력에 의해 굴착면을 지지하는 제거식 그라운드 앵커의 사용성이 중시되고 있다. 현재 현장에서 주로 이용되고 있는 압축분산형 앵커는 강선의 길이가 달라 기존 인장장치로 긴장력 도입시 일정한 긴장력을 취할 수 없어 앵커 거동에 문제점을 야기하고 있다. 따라서 Auto back 인장장치를 사용하여, 각 강선에 일정한 긴장력의 도입을 시도하는 현장실험을 실시하였다. 본 연구는 기존 인장장치와 Auto back 인장장치의 현장실험에 따른 실험결과치를, 탄성론에 의거하여 계산된 이론치와 비교 분석하였다. 그 결과 기존 인장장치는 강선의 수가 증가할수록 긴장력 차이가 더 증가하고 있음이 확인되었다. 이는 하중이 집중된 강선의 극한파괴와 지반의 전단파괴를 야기할 수 있다. 따라서 Auto back 인장장치에 의한 긴장이 이루어져 강선에 긴장력을 균등 분배해야 한다.

• 조명전기설비학회논문지
• /
• 제21권8호
• /
• pp.71-80
• /
• 2007

독립형 비전을 사용한 자동차용 부품인 밸브씰 검사 시스템을 개발하고 구성하였다. 구성부품은 8대의 독립형 CCD카메라, 검사를 위해 밸브 씰을 공급해 주는 기구장치로서 구성되었다. 2가지 형태의 밸브 씰 불량 유형에 대한 영상처리 알고리즘을 제안하였으며, 알고리즘의 효율성은 실험을 통하여 입증하였고 정밀한 상태로 0.7초 이내에 검사가 완료되도록 하였다. 이러한 검사 시스템은 자동차 부품산업에서 다양한 응용 분야로서 사용될 수 있을 것이다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 추계학술대회논문집 - 한국공작기계학회
• /
• pp.51-56
• /
• 2000

This study is to implement automatic inspection system of motor body panel by visual system. since it is inefficient to examine adhesion condition of components with the naked eye, image processing algorithm is presented to replace the existing manual inspection process with an automatic inspection process the developed automatic inspection system presents tile examination method of the adhesion condition of components with a pixed camera, which leads to an increase of the productivity and a reduction of manufacturing cost

• 한국기계가공학회지
• /
• 제12권3호
• /
• pp.36-40
• /
• 2013

Recently, electronic equipments become smaller, more functional, and more complex than before. As these trends, MLC(multi-layer ceramic) circuit has been emerged to a promising technology in semiconductor inspection industry. Especially, multi-layer ceramic which is consisted of many fine-pitch multi-hole is used to produce a semiconductor inspection unit. The hole is processed by UV laser. But, working conditions are changed all the time. Therefore real time measurement of fine-pitch multi-hole is very important method for ensuring performance. In this paper we found the best method for illuminating and auto focusing. And, we verified our equipment.