• The Journal of the Korea Contents Association
• /
• v.17 no.6
• /
• pp.1-8
• /
• 2017

A smart leveling equipment was developed in this study by improving present leveling equipment. Both hardware and software of the equipment was developed and several accuracy tests of bench mark were conducted using various survey equipments. National control point (UO992-A), control points (15-00-06-24)-B and (15-00-06-23)-C were used for the accuracy test. As a result, the stable results in the range of errors were obtained in the cases of auto-level and digital level. Approximately 24mm error in the section of A-B and 26mm of B-C section was occurred in Smart Level equipment. This is due to the lack of technology completion and errors via relatively many numbers of installation tests. 46mm error of RMSE of smart level survey was occurred through the difference of section test. A small error was detected in short range but errors were accumulated far from the bench mark. It's concluded that an in-depth study emphasizing accuracy improvement can be practically applied to the various areas of industry.

• Journal of Navigation and Port Research
• /
• v.43 no.6
• /
• pp.469-474
• /
• 2019

One of the world's major resources is crude oil, the most fundamental part of the industry. There is no place that does not use crude oil. Petroleum refining products and chemical production industrial products are produced through nearby petrochemical complexes and ports after importing crude oil. There would be a possible relationship among the petrochemical complexes and nearby regional ports working with liquid cargoes. To confirm these relations, Ulsan Port, Daesan Port, and Yeosu Gwangyang Port were selected for this study. A Vector Auto Regressive model using time series data was applied. A Unit Root Test was performed. The relationship was confirmed through the Granger and Toda Yamamoto Causality Test.

• Fashion & Textile Research Journal
• /
• v.13 no.6
• /
• pp.966-971
• /
• 2011

This study is designed to develop programs that analyze the distance of clothes from human skin and cross-sectional body figures based on 3D human body scan data, and to verify accuracy and efficiency of the program so that it can be used for clothing fit evaluation and 3D human body research. The auto cross-sectional imaging program was developed by using Visual C++ and OpenGL, and the 3D human body scan data were adopted to measure the space between skin and clothing. The space measurements were obtained by two widely used programs, RapidForm and AutoCAD, and a program devised by the researchers of this study. Measuring time and space measurements from different programs were compared in order to verify accuracy and efficiency of the newly-devised program. As a result, no significant difference was found in the measurements. However, the required time to measure one cross section was different within the significance level of 0.05, and the differences become more remarkable as the number of measuring and the angle of space between skin and clothing increase. Therefore, the program developed by this study is expected to be useful for research on body shapes and fit evaluation based on 3D human body scan data in the fashion field.

• Journal of Auto-vehicle Safety Association
• /
• v.9 no.4
• /
• pp.26-31
• /
• 2017

The current autonomous vehicle competitions are dominated by a few leading research institutions and universities. Since the leading research groups have been able to accumulate their knowledge and to develop their own algorithms for autonomous vehicle for many years, the technology gap seems too big for other followers to catch up with. On the other hand, recent researches predict that there would be a sharp rise in demand for engineers with background in autonomous vehicle technology. Therefore, it would be warranted to further expand the base of the academia and autonomous vehicle industry. In an effort to achieve this goal, it would be beneficial to hold a new format of autonomous vehicle competition event where undergraduate students can play a leading role. So, this study is to analyze the current autonomous vehicle competitions and thus to establish a strategic plan to develop a unique and improved competition event. This study investigates the pros and cons of the domestic and international autonomous vehicle competitions. Based on the analysis for the current autonomous vehicle competitions, the authors suggest a strategic plan to initiate an autonomous vehicle competition. To implement the aforementioned strategic plan, it is necessary to develop a systematic environment where the education and communication are actively available. Through the strategic plan the authors propose, the newly launching autonomous vehicle competition will able to encourage the undergraduate students and professors to dive in the cutting-edge technology thereby increasing technology competitiveness.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.3
• /
• pp.53-60
• /
• 2008

Recently, various recording technologies are studied for optical data storage. After standardization of BD (Blue-ray Disc) and HD-DVD (High-Definition Digital Versatile Disc), the industry is looking for a suitable technology for next generation optical data storage. Super-RENS (Super-resolution near field structure) technique, which is capable of compatibility with other systems, is one of next optical data storage. In this paper, we analyze the nonlinearity of Super-RENS read-out signal through the bicoherence test, which uses HOS (Higher-Order Statistics) and apply neural networks for nonlinear modeling. The model structure considered in this paper is the NARX (Nonlinear AutoRegressive eXogenous) model. The experiment results indicate that the read-out signals have nonlinear characteristics. In addition, it verified the possibility that neural networks can be utilized for nonlinear modeling of Super-RENS systems.

• Journal of Auto-vehicle Safety Association
• /
• v.8 no.4
• /
• pp.24-30
• /
• 2016

In Korea, the Vehicle Dismantler and Recycler industry is supervised by the Ministry of Land, Infrastructure and Transport under the Automobile Management Act. Also, Korean Automotive recycling businesses are supervised by the Minister of Environment under the Resource Recirculation Act. The main concern of the Minister of Environment is how the wastes from Dismantled vehicles will be environmentally removed, stored, treated, recycled or disposed. In 2000, the European Union (EU) adopted the End-of-Life Vehicles Directive (2000/53/EC) which required Members to ensure the collection, treatment and recovery of end-of-life vehicles (ELVs). The Directive, the most tightly regulated and precautionary legal systems, required that the last owner of a vehicle could drop off the ELV at an authorized treatment facility and that the producers of the ELV should pay the cost of the program. The adoption of the ELVs directive has led the development of Automotive Dismantler and Recycler networks to reuse, refurbish, remanufacture, recycle and recover parts and materials embedded in ELVs. Also, the ELVs directive which has had an insignificant impact on Korean manufacturers has strong presence in the European market and has been successfully externalized on them. The Korean manufacturers not only achieve the 85% recycling target set by the ELVs directive but also meet the Extended Producer Responsibility (EPR) which requires manufacturers to contribute dismantling process. In order to improve the Korean vehicle dismantling and recycling system, the Automobile Management Act and the Resource Recirculation Act should be harmonized. Particularly the roles of the Ministry of Land, Infrastructure and Transport and the Minister of Environment should be sharply divided. Like Japan, the ELV management needs to be highly centralized, regulated, and controlled by the ministry specialized in Vehicle, namely the Ministry of Land, Infrastructure and Transport and the sub organizations. Like EU Members, recovery, reuse, and recycling must be distinguished. Recovery is defined as the final productive use of the parts and materials embedded in ELVs, which includes reuse and remanufacture of parts and recycling of the other materials. Dismantling process and reuse and remanufacture of parts must be governed by the Ministry of Land, Infrastructure and Transport. For environmental recycling or disposal of waste materials, such as CFCs, glass and plastic material, and toxic substances, governmental financial support system should be in place.

• Journal of Auto-vehicle Safety Association
• /
• v.11 no.4
• /
• pp.28-38
• /
• 2019

In the world, traffic accidents and environmental pollution caused by the increase of vehicles are becoming a serious social problem. According to the 2016 data published by the Korea Highway Traffic Authority, Korea owns 49.9 vehicles per 100 people. This is the 28th largest number among the 35 OECD member countries. In addition, the number of deaths from traffic accidents in Korea totaled 4,292, of which 1,714 were caused by traffic accidents involving vehicles and pedestrians. To reduce these human casualties, the automotive industry is constantly working on the development and commercialization of Adaptive Driver Assist System (ADAS). ADAS is the system providing convenience and safeness for drivers. In general, ADAS consists of Autonomous Emergency Braking (AEB), Highway Driving Assist (HDA), Adaptive Cruise Control (ACC), Lane Keeping Assist System (LKAS). Among them, the AEB detects the possibility of collision by the vehicle itself and plays a role of avoiding the collision or reducing the damage through active braking. For such AEB, Euro NCAP has been developing test-evaluation methods for the vulnerable since 2017. Therefore, In this paper analyzes the scenario of Euro NCAP VRU Test Protocol v3.0.1, which will be established in 2020, and proposes test conditions according to the Korean road traffic law. In addition, the reliability of the proposed scenario and test conditions was verified by comparing and analyzing the proposed theoretical evaluation formulas and actual test results.

• The Research Journal of the Costume Culture
• /
• v.25 no.3
• /
• pp.270-284
• /
• 2017

This study aimed to create 3D-printed insoles for flat-footed senior men using 3D systems. 3D systems are product-manufacturing systems that use 3-dimensional technologies like 3D scanning, 3D modeling, and 3D printing. This study used a 3D scanner (NexScan2), 3D CAD programs including Rapidform, AutoCAD, SolidWorks, Nauta+ compiling program, and a 3D printer. In order to create insoles for flat-footed senior men, we analyzed horizontal sections of 3D foot scans We selected 20 flat-footed and 20 normal-footed subjects. To make the 3D insole models, we sliced nine lines on the surface of the subjects' 3D foot scans, and plotted 144 points on the lines. We calculated the average of these 3D coordinates, then located this average within the 3D space of the AutoCAD program and created 3D sole models using the loft surface tools of the SolidWorks program. The sole models for flat feet differed from those of normal feet in the depth of the arch at the inner sideline and the big toe line. We placed the normal-footed sole model on a flat-footed sole model, and the combination of the two models resulted in the 3D insole for flat feet. We printed the 3D modeled insole using a 3D printer. The 3D printing material was an acrylic resin similar to rubber. This made the insole model flexible and wearable. This study utilized 3D systems to create 3D insoles for flat-footed seniors and this process can be applied to manufacture other items in the fashion industry as well.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.26 no.6
• /
• pp.1513-1526
• /
• 2016

Since finance companies started e-banking services, those services have been diversified and use of them has continued to increase. Finance companies are implementing financial security policy for safe e-banking services, but e-Banking incidents are continuing to increase and becoming more intelligent. Along with the rise of internet banks and boosting Fintech industry, financial supervisory institutes are not only promoting user convenience through improving e-banking regulations such as enforcing Non-face-to-face real name verification policy and abrogating mandatory use of public key certificate or OTP(One time Password) for e-banking transactions, but also recommending the prevention of illegal money transfer incidents through upgrading FDS(Fraud Detection System). In this study, we assessed a blacklist based auto detection method suitable for overall situations for finance company, a real-time based suspicious transaction detection method linking with blacklist statistics model by each security level, and an alternative FDS model responding to typical transaction patterns of which information were collected from previous e-Banking incidents.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.12
• /
• pp.90-96
• /
• 2008

Recently, various recording technologies are studied for optical data storage. After standardization of BD (Blu-ray Disc) and HD-DVD (High-Definition Digital Versatile Disc), the industry is looking for a suitable technology for next generation optical data storage. Super-RENS (Super-Resolution Near Field Structure) technique, which is capable of compatibility with other systems, is one of next optical data storage. In this paper, we proposed a neural network-based nonlinear equalizer (NNEQ) for Super-RENS discs. To mitigate the nonlinear ISI (Inter-Symbol Interference), we applied NARX (Nonlinear AutoRegressive eXogenous) which is a kind of neural networks. Its validity is tested with the RF signal samples obtained from a Super-RENS disc. The performance of the proposed equalizer is superior to the one without equalization and that of the Limit-EQ in terms of BER (Bit Error Rate).