• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.588-590
• /
• 2006

Recently, many on-line approaches to instrument channel surveillance (drift monitoring and fault detection) have been reported worldwide. On-line monitoring (OLM) method evaluates instrument channel performance by assessing its consistency with other plant indications through parametric or non-parametric models. The heart of an OLM system is the model giving an estimate of the true process parameter value against individual measurements. This model gives process parameter estimate calculated as a function of other plant measurements which can be used to identify small sensor drifts that would require the sensor to be manually calibrated or replaced. This paper describes an improvement of auto-associative kernel regression by introducing a correlation coefficient weighting on kernel distances. The prediction performance of the developed method is compared with conventional auto-associative kernel regression.

• 전산구조공학
• /
• 제8권1호
• /
• pp.127-136
• /
• 1995

본 연구는 가중적분법을 이용한 추계론적 유한요소해석에 관한 것으로 구조계 내에 존재하는 재료상수와 기하학적 상수의 임의성을 해석에 고려하여 추계론적 해석을 수행하였으며 대상 구조로는 평판구조를 택하였다. 재료와 기하학적 해석인자의 임의성을 포함한 요소강성행렬의 유도를 위해서 임의장을 가장하였으며 임의장의 평균은 0이고 표준편차 값은 0.1을 사용하였다. 이러한 임의장의 특성은 auto-correlation 함수에 의해서 표현되었으며 이 함수는 반응변화도를 얻는 과정에 사용되었다. 본 연구에서는 평판의 두께에 대한 임의성을 고려하기 위해서 새로운 auto-correlation 함수가 유도되었다. 유도된 새로운 auto-correlation 함수는 재료탄성계수의 임의장 특성을 나타내는 기존의 함수와 임의장 분산 계수의 함수로 나타났다. 수치해석결과는 몬테카를로 시뮬레이션 결과와 비교되었으며 상호 잘 일치하는 좋은 결과를 나타내었고 이들 결과는 제시된 이론적인 수렴치와도 잘 일치하였다. 평판두께에 대한 해석의 경우 역시 Lawrence의 결과는 물론 몬테카를로 시뮬레이션과 제시된 이론치와도 잘 일치하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.654-655
• /
• 2008

In order to investigate the availability of tire airborne noise for vehicle road noise development, We measured the noise in condition of smooth road and coarse road. The correlation coefficient was analyzed using the articulation index of the tire airborne noise and the vehicle road noise. It has been found that the correlation between the tire airborne noise and the vehicle road noise is positively strong.

• 대한원격탐사학회지
• /
• 제39권6_1호
• /
• pp.1491-1495
• /
• 2023

본 연구는 북극의 해빙표면온도(ice surface temperature, IST)를 자동화된 기계 학습(automated machine learning, AutoML) 기반으로 산출하였다. AutoML 기반 IST는 상관관계(correlation coefficient, R) 0.97, 평균 제곱근 오차(root mean squared error, RMSE) 2.51K로 산출되었다. 심층신경망(deep neural network, DNN) 모델과 비교하여 AutoML IST는 Moderate Resolution Imaging Spectroradiometer (MODIS) IST 및 ice mass balance (IMB) buoy IST와의 검증 결과에서 좋은 정확도를 보인다. 이는 어려운 극지방 조건에서 IST 추정 정확도를 향상시키는 AutoML의 효과를 강조한다.

• Bulletin of the Korean Chemical Society
• /
• 제35권12호
• /
• pp.3527-3531
• /
• 2014

In this paper, we report thermodynamic and transport properties (diffusion coefficient, viscosity, and thermal conductivity) of diatomic gases ($H_2$, $N_2$, $O_2$, and $Cl_2$) at 273.15 K and 1.00 atm by performing molecular dynamics simulations using Lennard-Jones intermolecular potential and modified Green-Kubo formulas. The results of self-diffusion coefficients of diatomic gases obtained from velocity auto-correlation functions by Green-Kubo relation are in good agreement with those obtained from mean square displacements by Einstein relation. While the results for viscosities of diatomic gases obtained from stress auto-correlation functions underestimate the experimental results, those for thermal conductivities obtained from heat flux auto-correlation functions overestimate the experimental data except $H_2$.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.51-55
• /
• 2007

In this paper Statistical Energy Analysis has been considered to predict high frequency air borne interior noise. Dash panel Insulation is major part to reduce engine excitation noise. Transmission loss and absorption coefficient are considered to predict dash insulation performance. Transmission lose is derived from coupling loss factor and absorption coefficient is derived from internal damping loss factor. Material Biot properties were used to calculate each loss factors. Insulation geometry thickness distribution was hard to measure, so FeGate software was used to calculate thickness map from CAD drawing. Each predicted transmission losses between conventional insulation and light weight insulation were compared with SEA. Transmission loss measurement was performed to validate each prediction result, and it showed good correlation between prediction and measurement. Finally interior noise prediction was performed and result showed light weight insulation system can reduce 40% weight to keep similar performance with conventional insulation system, even though light weigh insulation system has lower sound transmission loss and higher absorption coefficient than conventional system.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.259-260
• /
• 2002

In this paper, electrical discharge machined (EDM) surfaces machined with various machining parameters are characterized and simulated. Three-dimensional surface topography of EDM surfaces are measured by a stylus instrument. Surface topography is characterized with auto-correlation coefficient and height probability density functions. Then, EDM surfaces are modeled and computer-simulated by using the non-causal 2-D auto-regressive model. Simulation results show that EDM surfaces are characterized well by a few parameters.

• Journal of Animal Science and Technology
• /
• 제64권1호
• /
• pp.135-142
• /
• 2022

It is impossible to know the amount of pork primal cut by pig carcass grade which is determined only by carcass weight and backfat thickness in the Korean Pig Carcass System. The aim of this study was to investigate the correlation between the pig carcass grade and the amount of pork primal cut estimated with AutoFom III. A total of 419,321 Landrace, Yorkshire, and Duroc (LYD) pigs were graded with the Korean Pig Carcass Grade System. Amounts of belly, neck, loin, tenderloin, spare ribs, shoulder, and ham were estimated with AutoFom III. Regression equations for seven primal cuts according to each grade were derived. There were significant differences among the three carcass grades due to heteroscedasticity variance (p < 0.0001). Three regression equations were derived from AutoFom III estimation of primal cuts according to carcass grades. The coefficient of determination of the regression equation was 0.941 for grade 1⁺, 0.982 for grade 1, and 0.993 for grade 2. Regression equations obtained from this study are suitable for AutoFom III software, a useful tool for the analysis of each pig carcass grade in the Korean Pig Carcass Grade System. The high reliability of predicting the amount of primal cut with AutoFom III is advantageous for the management of slaughterhouses to optimize their product sorting in Korea.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.560-563
• /
• 1997

Sound intensity method is well known as a visualization technique of sound field and sound propagation in noise control. Sound intensity is a vector quantity that describes the magnitude and the direction of net flow of acoustic energy at a given position. The current measuring method is expensive and difficult to identify the noise source exactly. In this paper, we have studied the noise source identification and the characteristics of noise source of rotary compressor for air conditioner using complex sound intensity method. The new method for instantaneous sound intensity is also proposed and it is useful for transient state and steady state. The criteria of these states select auto correlation coefficient. The advantage, simplicity and economic attribution of this method are verified by analyzing the characteristics of noise source with instantaneous sound intensity compared to mean sound intensity.

• Bulletin of the Korean Chemical Society
• /
• 제28권8호
• /
• pp.1371-1374
• /
• 2007

The velocity auto-correlation (VAC) function of liquid argon in the Green-Kubo formula decays quickly within 5 ps to give a well-defined diffusion coefficient because the velocity is the property of each individual particle, whereas the stress (SAC) and heat-flux auto-correlation (HFAC) functions for shear viscosity and thermal conductivity have non-decaying, long-time tails because the stress and heat-flux appear as system properties. This problem can be overcome through N (number of particles)-fold improvement in the statistical accuracy, by considering the stress and the heat-flux of the system as properties of each particle and by deriving new Green-Kubo formulas for shear viscosity and thermal conductivity. The results obtained for the transport coefficients of liquid argon obtained are discussed.