• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 1999.04a
• /
• pp.302-303
• /
• 1999

• Journal of Environmental Science International
• /
• v.9 no.4
• /
• pp.331-337
• /
• 2000

The variation of microorganisms (activated slude, Saccharomyces cerevisiae, Aureobasidium pullulans) caused by the biosorption of $Pb^{2+}$ was observed by TEM and microscope. By the TEM observation of S. cerevisiae, the plasmolysis and lysis of cell wall or cell membrane were occurred by the penetration of $Pb^{2+}$ into the inner cellular region. However, in the case of A. pullulans, the plasmolysis and lysis of cell wall or cell membrane were not occurred because of the prevention of $Pb^{2+}$ penetration by the extracelluar polymeric substances (EPS). A flocculation of microorganisms, in the case of A. pullulans, was observed by the $Pb^{2+}$ accumulation after 3~4 h and the color was changed from white to black after 1 day. The flocculation of activated sludge was improved by the accumulation $Pb^{2+}$ after 1 h, however, the floc was broken up and the settling efficiency decreased after 1 day.

• Journal of Environmental Health Sciences
• /
• v.24 no.1
• /
• pp.98-103
• /
• 1998

A study on the removal of mercury and lead by microorganisms, Saccharomyces cerevisiae and Aureobasidium pullulans, was performed, in which the comparison of adsorption model between these two heavy metals was done. The amounts of mercury removed were more than those of lead in both microorganisms. In case of mercury, the adsorption isotherm of S. cerevisiae was accorded with Langmuir model but A. pullulans was followed to Freundlich model. In the case of lead, however, the adsorption isotherm had opposite results. The adsorption rate of mercury to S. cerevisiae was faster than that of A. pullulans, but in the case of lead, it revealed contrary results. It seems, therefore, that the type of microorganisms used as biosorbents should be selected differently with the type of heavy metals removed for applying these to real adsorption process.

• Proceedings of the Korean Society of Life Science Conference
• /
• 2002.09a
• /
• pp.62-62
• /
• 2002

• Journal of Veterinary Clinics
• /
• v.30 no.6
• /
• pp.403-408
• /
• 2013

The objective of the present study is to detect the effect of ${\beta}$-glucan originated from Aureobasidium on the proliferation and collagen production in human dermal fibroblast cells with wound repopulation in vitro. The proliferative effects were assessed using a MTT assay as well as cell counts at 24 and 48 hr after treatment. Hydroxyproline was measured as an index of procollagen production with reverse-phase high pressure liquid chromatography. Oncostatin M was used as a reference agent. In glucagon treated group, dose-dependent and significant increase of optical density or fibroblast cell numbers was demonstrated, when compared with those of control from 0.1 mg/ml concentration. In addition, the numbers of cells which had migrated into the wound defects were more significantly and dose-dependently increased than those of non-treated control. However, no meaningful effects on the procollagen production were observed.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.1
• /
• pp.37-45
• /
• 2006

Treatment with exopolymers of Aureobasidium pullulans SM-2001 containing $\beta-1,3/1,6-glucan$ inhibited osteoclastogenesis of bone marrow stem cells in a co-culture system with calvariae osteoblastic cells. In addition, the treatment increased mineral deposition in osteoblastic cells. These two observations prompted us to evaluate whether the exopolymers could be used as an anti-osteoporotic agent, and efficacy of the exopolymers to prevent bone loss was compared with alendronate, a bisphosphonate, in ovariectomized mice prone to osteoporosis. Administration of the exopolymers to the ovariectomized mice resulted in improved effects on femur weight and histomorphometric changes of femur such as trabecular bone volume (TBV), trabecular bone thickness (TBT), and cortical bone thickness (CBT). In conclusion, the exopolymers treatment inhibited bone loss from osteoporosis induced by ovariectomy, and the effect was comparable to alendronate administration.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.12
• /
• pp.1954-1960
• /
• 2006

The effects of the exopolymers of Aureobasidium pullulans SM-2001 containing $\beta$-1,3/1,6-glucan on formalin-induced chronic inflammation were observed. Doses of 62.5, 125, and 250 mg/kg of the exopolymers were orally administered once a day for 10 days to formalin-induced chronic inflammatory mice (0.02 ml of 3.75% formalin was subaponeurotically injected into the left hind paw), and then the bilateral hind-paw thickness and volume were measured daily, while the paw wet-weight, histological profiles, and histomorphometrical analyses were conducted at termination. The results were compared with those for diclofenac, indomethacin, and dexamethasone (intraperitoneally injected) 15 mg/kg-dosed groups. All the animals were sacrificed 10 days after dosing. As a result of the formalin injection, a marked increase in the difference between the intact and formalin-induced paw thickness and volume was detected in the formalin-injected control compared with that in the intact control with time, plus at the time of sacrifice, the difference in the paw wet-weights was also dramatically increased. In a histological and histomorphometrical analysis, severe histological profiles of chronic inflammation were detected in the formalin-injected control with a marked increase in the thickness of the skin of the dorsum pedis. However, these formalin-induced chronic inflammatory changes were significantly and dose-dependently decreased by the exopolymer treatment. In conclusion, the exopolymer treatment inhibited the chronic inflammatory response induced by formalin injection in the mice. However, somewhat low efficacies were detected compared with those for the diclofenac-, indomethacin-, and dexamethasone-treated groups.

• Journal of Microbiology and Biotechnology
• /
• v.28 no.5
• /
• pp.697-706
• /
• 2018

Lactobacillus pentosus K1-23 was selected from among 25 lactic acid bacterial strains owing to its high inhibitory activity against several pathogenic bacteria, including Escherichia coli, Salmonella typhimurium, S. gallinarum, Staphylococcus aureus, Pseudomonas aeruginosa, Clostridium perfringens, and Listeria monocytogenes. Additionally, among 13 strains of Aureobasidium spp., A. pullulans NRRL 58012 was shown to produce the highest amount of ${\beta}$-glucan ($15.45{\pm}0.07%$) and was selected. Next, the optimal conditions for a solid-phase mixed culture with these two different microorganisms (one bacterium and one yeast) were determined. The optimal inoculum sizes for L. pentosus and A. pullulans were 1% and 5%, respectively. The appropriate inoculation time for L. pentosus K1-23 was 3 days after the inoculation of A. pullulans to initiate fermentation. The addition of 0.5% corn steep powder and 0.1% $FeSO_4$ to the basal medium resulted in the increased production of lactic acid bacterial cells and ${\beta}$-glucan. The following optimal conditions for solid-phase mixed culture were also statistically determined by using the response surface method: $37.84^{\circ}C$, pH 5.25, moisture content of 60.82%, and culture time of 6.08 days for L. pentosus; and $24.11^{\circ}C$, pH 5.65, moisture content of 60.08%, and culture time of 5.71 days for A. pullulans. Using the predicted optimal conditions, the experimental production values of L. pentosus cells and ${\beta}$-glucan were $3.15{\pm}0.10{\times}10^8CFU/g$ and $13.41{\pm}0.04%$, respectively. This mixed culture may function as a highly efficient antibiotic substitute based on the combined action of its anti-pathogenic bacterial and immune-enhancing activities.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.2
• /
• pp.237-242
• /
• 2004

Cell growth and the production of pullulan by Aureobasidium pullulan HP-2001, the UV-induced mutant of A pullulans ATCC 42023, increased with increased concentration of glucose up to 15.0% (w/v). Maximal production of pullulan in the flask scale was 27.65 g/l, when concentrations of glucose and yeast extract were 15.0 and 0.25% (w/v), respectively. Maximal conversion rate of pullulan from glucose as the carbon source was 0.37, when those of glucose and yeast extract were 5.0 and 0.15% (w/v), respectively. On the basis of total amount of pullulan, the conversion rate of pullulan from glucose, and utilization rate of glucose to cell mass and pullulan by A. pullulans HP-2001, the optimal concentrations of glucose and yeast extract for the mass production of pullulan were determined to be 10.0 and 0.25% (w/v), respectively, at which concentrations the production of pullulan and its conversion rate were 27.14 g/l and 0.27, respectively. Maximal production of pullulan with optimized concentrations of carbon and nitrogen sources by A. pullulans HP-200l in a 7-1 bioreactor was 32.12 g/l for 72 h culture, and that in a 100-1 bioreactor with the inner pressure of $0.4 kgf/cm^2$ was 36.87 g/l. Increased inner pressure of a 100-1 bioreactor resulted in a higher concentration of dissolved oxygen in the medium, which might enhance the production of pullulan by A. pullulans HP-2001.

• KSBB Journal
• /
• v.17 no.6
• /
• pp.555-559
• /
• 2002

Three different strains of Aureobasidium pullulans were grown in batch cultures to compare their abilities of enzyme production. It was found that specific enzyme activity was the highest with strain ATCC 9348 and the enzyme production was closely coupled to growth. Studies on morphology during the growth of A. pullulans revealed that mycelia cells were dominant at the initial stages of growth. However, yeast-like cells and chlamydospores were dominant in the latter stages of batch culture. The pattern of morphological changes during the growth period was not affected by pH. However, it appears that the ratio of intra- to extracellular enzyme activity tended to increase with fermentation time irrespective of the pH employed, suggesting that the secretion efficiency of intracellular enzyme to broth likely depends on cell morphology Using molasses as a cheap source of sucrose, enzymatic production of fructo-oligosaccharides as a feed additive with A. pullulans cells could be achieved successfully at 55$\^{C}$ and pH 5.5.