• 제목/요약/키워드: Auger electron spectra

검색결과 23건 처리시간 0.016초

Cu 도핑과 열처리가 ZnTe 박막의 물성에 미치는 영향 (Influence of Cu Doping and Heat Treatments on the Physical Properties of ZnTe Films)

  • 최동일;윤세왕;김동환
    • 한국재료학회지
    • /
    • 제9권2호
    • /
    • pp.173-180
    • /
    • 1999
  • Thermally evaporated ZnTe films were investigated as a back contact material for CdS/CdTe solar cells. Two deposition methods, coevaporation and double-layer methods, were used for Cu doping in ZnTe films. ZnTe layers (0.2$\mu\textrm{m}$ thick) were deposited either on glass or on CdS/CdTe substrates without intentional heating of the substrates. Post-deposition annealing was performed at 200,300 and $400^{\circ}C$ for 3,6 and 9 minutes, respectively. Band gap of 2.2eV was measured for both undoped and doped films and a slight change in the shape of absorption spectra was observed in Cu-doped samples after annealing at $400^{\circ}C$. The resistivity of as-deposited ZnTe decreased from 10\ulcorner~10\ulcornerΩcm down to 10\ulcornerΩcm as Cu concentration increased from 0 to 14 at.%. There was not a noticeable change in less of annealing temperature up to $300^{\circ}C$ whereas films annealed at $400^{\circ}C$ revealed hexagonal (101) orientations as well. Some of Cu-doped ZnTe revealed x-ray diffraction (XRD) peaks related with Cu\ulcornerTe(x=1.75~2). Grain growth was observed from about 20nm in as-deposited films to 50nm after annealing at $400^{\circ}C$ by scanning electron microscopy (SEM). Cu distribution in ZnTe films was not uniform according to Auger electron spectroscopy (AES) measurements.

  • PDF

Mössbauer 공명에 의한 Mg2Ni1-xFex 합금의 연구 (Study of Mg2Ni1-xFex Alloys by Mössbauer Resonance)

  • 송명엽
    • 한국수소및신에너지학회논문집
    • /
    • 제10권2호
    • /
    • pp.119-130
    • /
    • 1999
  • $Mg_2Ni_{1-x}{^{57}}Fe_x$(x=0.015, 0.03, 0.06, 0.12 and 0.24)합금을 제작하여 $M{\ddot{o}}ssbauer$ 공명에 의한 연구를 하였다. x=0.015, 0.03 합금의 $M{\ddot{o}}ssbauer$ spectrum은 2개의 doublet(doublet 1, 2)을, x=0.06 합금의 spectrum은 2개의 doublet(doublet 1, 2)과 1개의 six-line을, 그리고 x=0.12, 0.24 합금의 spectrum은 six-line만 보인다. x=0.015, 0,03, 0.06 합금의 doublet 1은, 초 상자성 거동을 보여주는 과잉으로 존재하는 일부의 철 때문에 생기는 것으로 판단된다. doublet 2는, $Mg_2Ni$ 상의 Ni에 치환된 철에 기인한 것으로 판단된다. doublet 2의 isomer shift 크기 (0,24 ~ 0.28 mm/s)로 보아 $Fe^{+3}$로 존재함을 추측할 수 있다. 또한 doublet 2의 quadrapole splitting이 영이 아님으로부터 Fe 주위의 전자 배열이 비대칭을 이루고 있음을 알 수 있고, 그 크기 (1.20 ~ 1.38 mm/s)는 산화수 +3의 quadrapole splitting 값에 아주 가까운 값이다. 자기적 초미세 상호 작용을 보여주는 six-line은 합금 속에 들어가지 않는 철 때문에 생긴다. 수소화물화 반웅시킨 x=0.015, 0.03 합금의 $M{\ddot{o}}ssbauer$ spectrum이 six-line을 보였는데, 이로부터 수소화물화 반응으로 인하여 Fe이 편석되었음을 알 수 있다. 수소화물화 반응후 $M{\ddot{o}}ssbauer$ spectrum, 자기장의 함수로서 자화의 변화 측정, Auger electron spectroscopy, electron diffraction pattern 분석 결과, Ni의 편석과 MgO의 형성을 보여주었는데, 이는 수소 속에 들어 있는 미량의 산소가 $Mg_2Ni$와 반응하여 야기된 현상으로 생각된다.

  • PDF

XPS, ISS, AES, TPD를 이용한 $TiO_2$ 위에 지지된 Au 클러스터의 특성 연구 (Properties of Au Clusters Supported on $TiO_2$ Studied by XPS, ISS, AES, and TPD)

  • 김대영
    • 대한화학회지
    • /
    • 제42권6호
    • /
    • pp.607-617
    • /
    • 1998
  • $TiO_2(001)$ 박막을 Mo(100) 기판에 약 90${\AA}$ 두께로 적층 성장시키고 그 위에 Au를 증착시켜서 Au의 성장모드, 클러스터의 열적 변화, 열적 안정성, 증착량에 따른 Au 4f 전자 결합에너지의 변화를 오제 전자분광법, 열탈착 분광법, 이온 산란 분광법, X-선 광전자 분광법을 이용하여 연구하였다. Au는 $TiO_2(001)/Mo(100)$ 박막에 3차원적인 성장을 하며 낮은 온도에서 성장된 Au 클러스터는 높은 온도에서 성장된 것보다 보다 그 크기가 작고 온도가 높아지면서 클러스터는 비가역적으로 뭉친다. $TiO_2(100)/Mo(100)$에 증착된 Au의 열탈착은 1000 K부터 일어나며, 증착된 Au의 증착량이 많아질수록 더 높은 온도에서 나타난다. 선도 언저리 해석법으로 얻은 Au 클러스터의 탈착에너지는 약 50 kcal/mol이다. Au의 $TiO_2$ 박막에 대한 초기 흡착상수는 기판의 온도 200-600 K 사이에서는 거의 일정하였다. 400 K에서 $TiO_2$ 박막에 2.0 MLE 보다 적은 양의 Au가 증착된 경우에는 Au 4f의 전자 결합에너지가 벌크 Au에 비해서 증가한다. 0.1 MLE의 경우에는 그 결합에너지가 벌크 Au에 비해서 +0.30 eV 이동하였다.

  • PDF