• 제목/요약/키워드: Attenuation curve

검색결과 70건 처리시간 0.022초

유도초음파의 감쇠계수에 대한 실험적 고찰 (Experimental Investigation for the Attenuation Coefficient of Ultrasonic Guided Wave)

  • 이동진;조윤호;이준현;신동철
    • 비파괴검사학회지
    • /
    • 제29권5호
    • /
    • pp.458-465
    • /
    • 2009
  • 일반적인 산업현장에서 내부결함 평가를 위해 사용되어온 유도초음파기법은 비결함 지역에서는 에너지 감쇠를 고려하지 않고 적용되어 왔다. 결함 지역에서의 신호는 산란과 반사에 의해서 분명한 감쇠가 발생하지만 비결함 지역에서도 작은 감쇠가 발생한다. 또한 분산선도에서 판파(Lamb wave)는 각 두께, 주파수에 의해 분산성이 달라지기에 각 모드에 적합한 감쇠계수를 찾는 것은 중요하다. 이를 위해 접촉식 PZT(piezoelectric)센서를 이용한 pitch-catch 방식으로 거리에 따른 각 모드의 감쇠계수를 구하였다. 본 연구에서는 흔히 쓰이는 알루미늄과 구리판으로, 두께 차이, 모드 차이, 재질 차이에 의한 실험적인 감쇠율을 구하는데 중점을 두었다. 그 결과 각 변수에 따라 감쇠계수는 달라지며, 정량화가 필요하다는 것을 확인하였다.

비틀림 유도파를 이용한 근지표면 전단속도 규명 (Identification of the Shear Velocities of Near Surface Soils Using Torsional Guided Waves)

  • 박경조;오형수
    • 한국소음진동공학회논문집
    • /
    • 제22권8호
    • /
    • pp.771-776
    • /
    • 2012
  • A technique is presented that uses a circular waveguide for the measurement of the bulk shear(S-wave) velocities of unconsolidated, saturated media, with particular application to near surface soils. The technique requires the measurement of the attenuation characteristics of the fumdamental T(0,1) mode that propagates along an embedded pipe, from which the acoustic properties of the surrounding medium are inferred. From the dispersion curve analysis, the feasibility of using T(0,1) mode which is non-dispersive and have constant attenuation over all frequency range is discussed. The principles behind the technique are discussed and the results of an experimental laboratory validation are presented. The experimental data are best fitted for the different depths of wetted sand and the shear velocities as a function of depths are formulated using power law curves.

초음파탐상(超音波探傷)에서의 감도차(感度差) 측정(測定) 연구(硏究) (Study on the Sensivivity Difference Measurement by Ultrasonic Testing)

  • 정용무;안희성;이연필
    • 비파괴검사학회지
    • /
    • 제2권1호
    • /
    • pp.5-9
    • /
    • 1982
  • Experiments were performed according to ultrasonic attenuation measurement and comparison method of DAC curve to analyze the difference between PSI and 2nd ISI ultrasonic testing results. Smaller error was found by comparison method of DAC curve, and that method was more useful practically.

  • PDF

수치해석을 통한 진동감쇠식 맞춤형 암반의 감쇠비 산정 (Estimation of Attenuation Relationship Compatible with Damping Ratio of Rock Mass from Numerical Simulation)

  • 김낙영;류재하;안재광;박두희;손무락;황영철
    • 한국지반공학회논문집
    • /
    • 제31권4호
    • /
    • pp.45-55
    • /
    • 2015
  • 발파에 대한 주변 구조물이나 사면의 안정성은 경험적 진동감쇠식 또는 발파진동 동적 수치해석을 통하여 평가한다. 동적해석을 수행하기 위해서는 발파하중과 지반 감쇠비의 산정이 필요하다. 발파하중에 대해서는 다양한 경험적 방법이 제시되었지만 암반의 감쇠비에 대한 연구는 제한적이며 해석 시 이를 무시하거나 명확한 근거 없이 가정하여 해석에 적용하고 있다. 암반의 감쇠비는 절리의 영향을 크게 받으므로 이를 고려해서 산정해야 한다. 또한, 평면파로 가정할 수 있는 지진파와는 다르게 발파 시에는 구면파가 생성되며 이를 2차원 해석에서 모사하는 경우에는 이의 기하학적 확산을 고려하기 위하여 감쇠비를 조정해야 한다. 본 연구에서는 위의 두 가지 영향이 고려된 2차원 평면변형률 연속체 해석에 적용 가능한 암반의 등가감쇠비를 제안하였다. 이를 위하여 다양한 강성의 암반에 대한 2차원 동적해석을 수행하여 암반의 감쇠비에 따른 진동전파 특성을 분석하였으며 해석결과를 기반으로 진동감쇠식-전단파속도-등가감쇠비와의 상관관계를 규명하였다. 제시된 상관관계는 경험적 진동감쇠식에 상응하는 감쇠비를 산정한 최초의 시도로 중요한 의미가 있으며 동시에 실무에도 쉽게 적용될 수 있는 유용한 방법이다.

Contrast Media in Abdominal Computed Tomography: Optimization of Delivery Methods

  • Joon Koo Han;Byung Ihn Choi;Ah Young Kim;Soo Jung Kim
    • Korean Journal of Radiology
    • /
    • 제2권1호
    • /
    • pp.28-36
    • /
    • 2001
  • Objective: To provide a systematic overview of the effects of various parameters on contrast enhancement within the same population, an animal experiment as well as a computer-aided simulation study was performed. Materials and Methods: In an animal experiment, single-level dynamic CT through the liver was performed at 5-second intervals just after the injection of contrast medium for 3 minutes. Combinations of three different amounts (1, 2, 3 mL/kg), concentrations (150, 200, 300 mgI/mL), and injection rates (0.5, 1, 2 mL/sec) were used. The CT number of the aorta (A), portal vein (P) and liver (L) was measured in each image, and time-attenuation curves for A, P and L were thus obtained. The degree of maximum enhancement (Imax) and time to reach peak enhancement (Tmax) of A, P and L were determined, and times to equilibrium (Teq) were analyzed. In the computed-aided simulation model, a program based on the amount, flow, and diffusion coefficient of body fluid in various compartments of the human body was designed. The input variables were the concentrations, volumes and injection rates of the contrast media used. The program generated the time-attenuation curves of A, P and L, as well as liver-to-hepatocellular carcinoma (HCC) contrast curves. On each curve, we calculated and plotted the optimal temporal window (time period above the lower threshold, which in this experiment was 10 Hounsfield units), the total area under the curve above the lower threshold, and the area within the optimal range. Results: A. Animal Experiment: At a given concentration and injection rate, an increased volume of contrast medium led to increases in Imax A, P and L. In addition, Tmax A, P, L and Teq were prolonged in parallel with increases in injection time The time-attenuation curve shifted upward and to the right. For a given volume and injection rate, an increased concentration of contrast medium increased the degree of aortic, portal and hepatic enhancement, though Tmax A, P and L remained the same. The time-attenuation curve shifted upward. For a given volume and concentration of contrast medium, changes in the injection rate had a prominent effect on aortic enhancement, and that of the portal vein and hepatic parenchyma also showed some increase, though the effect was less prominent. A increased in the rate of contrast injection led to shifting of the time enhancement curve to the left and upward. B. Computer Simulation: At a faster injection rate, there was minimal change in the degree of hepatic attenuation, though the duration of the optimal temporal window decreased. The area between 10 and 30 HU was greatest when contrast media was delivered at a rate of 2 3 mL/sec. Although the total area under the curve increased in proportion to the injection rate, most of this increase was above the upper threshould and thus the temporal window was narrow and the optimal area decreased. Conclusion: Increases in volume, concentration and injection rate all resulted in improved arterial enhancement. If cost was disregarded, increasing the injection volume was the most reliable way of obtaining good quality enhancement. The optimal way of delivering a given amount of contrast medium can be calculated using a computer-based mathematical model.

  • PDF

파쇄영역에 따른 발파진동 전파특성 (Propagation characteristics of blast-induced vibration to fractured zone)

  • 안재광;박두희;박기천;윤지남
    • 한국터널지하공간학회 논문집
    • /
    • 제19권6호
    • /
    • pp.959-972
    • /
    • 2017
  • 발파진동 안정성 평가는 일반적으로 발파 진동추정식을 통해 최대진동속도(PPV)를 산정하고 추정된 속도 값과 법규 혹은 기준에 제시된 허용 기준 값을 비교하여 안정성 여부를 판단한다. 현장 고유의 발파 진동추정식은 시험 발파의 횟수, 대상지반의 지질학적 구조와 발파 조건에 따라 달라지기 때문에 이 식을 통해 정확한 응답 값을 예측하는 것은 한계가 있다. 또한 최대진동속도는 지반에 예상되는 응답 값으로 구조물에 대한 직접적인 평가는 불가능하다. 이와 같은 한계점으로 인해 발파 진동에 대한 구조물의 정밀한 안정성을 평가할 경우 엔지니어들은 상용화된 수치해석 프로그램을 이용한다. 하지만 폭발로 인해 발생하는 발파공 주변 암반의 복합적인 상태변화(파쇄, 분쇄, 균열, 소성변형)를 기존 수치해석 프로그램으로 정확히 모델링 하기가 쉽지 않다. 만약 이러한 일련의 과정을 모사할 경우 절점 수의 제한으로 인해 모델링이 가능한 범위가 한정적이고 긴 연산시간이 소요된다. 따라서, 본 연구에서는 폭발로 발생하는 암반의 복합적 상태변화 과정을 모사하지 않고 파쇄영역 이후 탄성에너지 전파만을 모사하는 해석 방법에 대한 연구를 수행하였으며, 이때 파쇄영역의 형상 및 크기에 따른 속도의 응답특성을 분석하였다. 그 결과 폭원 주변에서는 설정되는 파쇄영역에 따라 계산된 속도의 크기 및 감쇠에 차이를 보였다. 전파되는 진동은 폭원으로부터 멀어질수록 구형으로 확산되는 것으로 나타났다.

Under-Developed and Under-Utilized Eclipsing Binary Model Capabilities

  • Wilson, R.E.
    • Journal of Astronomy and Space Sciences
    • /
    • 제29권2호
    • /
    • pp.115-121
    • /
    • 2012
  • Existing but largely unused binary star model capabilities are examined. An easily implemented scheme is parameterization of starspot growth and decay that can stimulate work on outer convection zones and their dynamos. Improved precision in spot computation now enhances analysis of very precise data. An existing computational model for blended spectral line profiles is accurate for binary system effects but needs to include damping, thermal Doppler, and other intrinsic broadening effects. Binary star ephemerides had been found exclusively from eclipse timings until recently, but now come also from whole light and radial velocity curves. A logical further development will be to expand these whole curve solutions to include eclipse timings. An attenuation model for circumstellar clouds, with several absorption and scattering mechanisms, has been applied only once, perhaps because the model clouds have fixed locations. However the clouds could be made to move dynamically and be combined into moving streams and disks. An area of potential interest is polarization curve analysis, where incentive for modeling could follow from publication of observed polarization curves. Other recent advances include direct single step solutions for temperatures of both stars of an eclipsing binary and third body kinematics from combined light and velocity curves.

주파수응답함수(FRF)를 이용한 자기 애자의 손상평가 (Damage Evaluation of Porcelain Insulators Using the Frequency Response Function)

  • 최인혁;손주암;오태근;윤영근
    • 한국전기전자재료학회논문지
    • /
    • 제32권2호
    • /
    • pp.122-128
    • /
    • 2019
  • Porcelain insulators have been used mainly for power line fixing and electrical insulation in transmission towers. Porcelain insulators have generally a 30 years desired life, but over 50% exceed their life expectancy. Since the damage to porcelain insulators is usually accompanied by enormous loss of human resource material, their efficient maintenance has emerged as an important issue. In this regard, this study applied a frequency response function (FRF) for integrity assessment of the insulator. The characteristics of the FRF according to damage types were identified and analyzed by the change in natural frequencies, curve shape, attenuation, and Nyquist diagram stability. The results showed significant differences in the FRF according to damage types, which can be used as basic data for the effective integrity assessment of porcelain insulators.

Influence of structure coupling effect on damping coefficient of offshore wind turbine blades

  • Zhang, Jianping;Gong, Zhen;Li, Haolin;Wang, Mingqiang;Zhang, Zhiwei;Shi, Fengfeng
    • Wind and Structures
    • /
    • 제29권6호
    • /
    • pp.431-440
    • /
    • 2019
  • The aim of this study was to explore the influence of structure coupling effect on structural damping of blade based on the blade vibration characteristic. For this purpose, the scaled blade model of NREL 5 MW offshore wind turbine was processed and employed in the wind tunnel test to validate the reliability of theoretical and numerical models. The attenuation curves of maximum displacement and the varying curves of equivalent damping coefficient of the blade under the rated condition were respectively compared and analyzed by constructing single blade model and whole machine model. The attenuation law of blade dynamic response was obtained and the structure coupling effect was proved to exert a significant influence on the equivalent damping coefficient. The results indicate that the attenuation trend of the maximum displacement response curve of the single blade varies more obviously with the increase of elastic modulus as compared to that under the structure coupling effect. In contrast to the single blade model, the varying curve of equivalent damping coefficient with the period is relatively steep for the whole machine model. The findings are of great significance to guide the structure design and material selection for wind turbine blades.

50-300 keV X-ray Transmission Ratios for Lead, Steel and Concrete

  • Tae Hwan Kim;Kum Bae Kim;Geun Beom Kim;Dong Wook Kim;Sang Rok Kim;Sang Hyoun Choi
    • 한국의학물리학회지:의학물리
    • /
    • 제33권4호
    • /
    • pp.164-171
    • /
    • 2022
  • The number of facilities using radiation generators increases and related regulations are strengthened, the establishment of a shielding management and evaluation technology has become important. The characteristics of the radiation generator used in previous report differ from those of currently available high-frequency radiation generators. This study aimed to manufacture lead, iron, and concrete shielding materials for the re-verification of half-value layers, tenth-value layers, and attenuation curve. For a comparison of attenuation ratio, iron, lead, and concrete shields were manufactured in this study. The initial dose was measured without shielding materials, and doses measured under different types and thicknesses of shielding material were compared with the initial dose to calculate the transmission rate on 50-300 kVp X-ray. All the three shielding materials showed a tendency to require greater shielding thickness for higher energy. The attenuation graph showed an exponential shape as the thickness decreased and a straight line as the thickness increased. The difference between the measurement results and the previous study, except in extrapolated parts, may be due to the differences in the radiation generation characteristics between the generators used in the two studies. The attenuated graph measured in this study better reflects the characteristics of current radiation generators, which would be more effective for shield designing.