• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권1호
• /
• pp.18-25
• /
• 2000

In the two-mass servo system driving a load through a flexible shaft, a shaft torsional vibration is often generated. PI controller has been generally used is speed control of such system because of the simplicity of structure and related theory. This paper presents the inertia ratio of the PI servo control system which can be designed by using optimal pole assignment method is fixed. Therefore, it's difficult to obtain the desired control characteristics for different systems only by PI control algorithm. To solve this problems the two-mass speed control system with PID controller is designed by using pole assignment method and an optimum PID parameters are derived by evaluating ITAE(Integral of time multiplied by the absolute error) performance index. But this design method has some problems due to a trade-off between the fast command following property and the attenuation of disturbances and vibrations. In this paper, 2-DOF PID control method which satisfies the command following property, the reduction of overshoot and the property of disturbance rejection at the same time is proposed. This is a practical speed controller using the desired value filter and the feedforward gain. From several simulations, it's clarified that the proposed 2-DOF PID controller is useful for the two-mass system, in comparison with the conventional PID controller.

• 한국광학회지
• /
• 제15권3호
• /
• pp.222-228
• /
• 2004

측면 연마 광섬유를 이용하여 가변 광 감쇠기를 실험적으로 구현하였다. 오버레이 물질로는 poly(vinylidene fluoride)와 poly (methyl methacrylate) 고분자 혼합체를 사용하였다. 혼합고분자의 온도를 변화시켜 오버레이의 굴절률을 조절하였고, 그로 인한 소산장 결합정도를 변화시켜 광섬유로부터 추출되는 광량을 조절하였다. 삽입손실은 0.1 ㏈ 이하였으며 30㏈이상의 감쇠를 실현하였다.

• 대한전기학회논문지
• /
• 제32권2호
• /
• pp.50-58
• /
• 1983

In this paper, a field trial of the Korean-made optical fiber communication system is described. This system was installed between Gu-Ro and Ann-Yang telephone offices on November 1981, and carries a 44.7Mb/s NRZ signal(672 voice channel equivalent). For this trial, optical fiber cable, optical terminal equipment, optical repeater, fusion splicer and measurement equipment have been developed. Employing graded index optical fiber at a wave length of $0.85\;\mu\textrm{m}$, average optical attenuation and splicing losses of 3.6 dB/km and 0.4 dB, resectively, were realized. With link margins of 8~20dB and bit error rate of less than $10^{-10}$, this system has been carrying live traffic between Seoul and Ann Yang telephone offices.

• 대한전자공학회논문지SD
• /
• 제41권10호
• /
• pp.57-62
• /
• 2004

단일 모드 광섬유의 측면을 일부분 연마하여 연마된 상부에 열 광학 폴리머 층과 금속열선을 형성한 광섬유형 전류센서를 보고한다. 금속 열선에 인가된 전류에 의해서 발생하는 저항열은 폴리머 층의 굴절률을 변화시키고 광섬유의 소산장을 통한 광 감쇄를 유도하게 된다 두 가지 유형의 센서구조를 제안하였고 전류센서로서의 특징을 조사하였다.

• 국제초고층학회논문집
• /
• 제7권2호
• /
• pp.171-183
• /
• 2018

Turner and Penn (1) from UCL have proved that Visibility Graph Analysis (VGA) can be used as a more accurate method to predict the pedestrian distribution in building spaces. However, this methodology neglects certain elements that are of special influence on pedestrian distribution in buildings, especially the entrances and exits. Based on Space Syntax, this dissertation improves on the traditional method of Visibility Graph Analysis, using three shopping centers in Shenzhen as examples, attempts to explore a new parameter - "attenuation index of pedestrians at the entrances and exits" - using relevant data of the entrances and exits of the three cases, and combines it with traditional VGA analysis through weighted calculation, in order to provide more accurate predictions of pedestrian patterns in shopping centers.

• 한국전자파학회논문지
• /
• 제15권1호
• /
• pp.29-35
• /
• 2004

광 펄스가 대기 공간을 통해 전파될 때, 광 펄스는 대기 교란으로 인해 감쇠되고 퍼지게 되며, 이러한 펄스 퍼짐은 광 수신단에서 도착되는 펄스의 요동으로 인해 발생한다. 디지털 광통신에서는 감쇠도 중요한 인자이지만 펄스 퍼짐이 더 중요한 인자로 작용한다. 이에, 본 논문에서는 교란 대기를 통해 전파되는 광 펄스의 퍼짐을 구하고, 이러한 펄스 퍼짐을 대기 교란 상수인 굴절률 구조함수로 나타내고 대기 교란 상태와 전송거리에 따른 펄스 퍼짐 정도를 시뮬레이션 하였다.

• 대한지역사회영양학회지
• /
• 제11권4호
• /
• pp.534-540
• /
• 2006

Recent studies have shown that environmental, biochemical, nutritional or genetic factors affect bone mineral density (BMD). The purpose of the present study was to investigate the effect of vitamin D receptor (VDR) gentotype and nutritional status on BMD of elderly women living in a rural area. Three hundred thirty five elderly women over 65 years in Asan participated the study. Data for demographic and nutrient intakes were obtained by survey with a two day 24 hr recall method. BMD was measured by broadband ultrasound attenuation (BUA) using quantitative ultrasound (QUS). VDR genotypes of the subjects analyzed with Bsm I restriction enzyme were bb (92%), Bb (7%) and BB (1%). No differences were found between genotypes bb and Bb/BB in age, menopausal age, body mass index and body fat. BUA of bb genotype was higher (62.5 $\pm$ 15.6 dB/MHz) than Bb/BB genotype (56.1 $\pm$ 17.6 dB/MHz) by Student's t-tests. Correlation analyses showed strong negative correlation of BMD and age, but positive correlation with BMI, energy and calcium intake. When subgroup analyses were conducted after stratification by the median calcium intake level (412.9 mg/d), the above median calcium intake group showed significant difference in BUA by VDR genotype while the lower median calcium intake group did not show significant difference. The current study confirmed interaction of calcium intake and VDR genotype in association with BMD. Further nutritional intervention will be needed to improve calcium status of the elderly women living in rural areas.

• 대한기계학회논문집A
• /
• 제28권5호
• /
• pp.489-494
• /
• 2004

Long Period Gratings (LPG) is currently receiving considerable attention because of their consistent measuring results fur pressure, temperature, strain and flow. LPG is easier to prepare and has a high sensitivity compared with Fiber Bragg Gratings (FBG). In addition, this kind of optical fiber sensors could be used for implementations in various structures. In this paper, LPG was used to monitor in situ the resin flow and the curing process in VARTM (Vacuum Assisted Resin Transfer. Molding). In order to demonstrate the effectiveness of the method, FBG is inserted into the glass mat to monitor the resin flow using optical spectrum analyzer (OSA). The curing reactions in VARTM are also observed using the same method. From the results, the attenuation wavelength shift and the loss change of attenuation band can be obtained from the status of the RTM (Resin Transfer Molding) sample owing to the internal variations of the .effective index, temperature, and pressure. It is shown that the proposed LPG is more effective in monitoring the curing reaction than FBG.

• Nuclear Engineering and Technology
• /
• 제56권9호
• /
• pp.3804-3811
• /
• 2024

The study focuses on creating new boro-silicate glasses doped with SnO₂ for radiation shielding. It examines how substituting Na₂O with SnO₂ affects their structural, optical, and shielding properties. Density increases from 2.406 to 2.488 g/cm³ with rising SnO₂, measured via the Archimedes Method. The examination for the glassy phase was performed using the XRD diffractometer. UV/Vis spectrophotometer analysis reveals reduced refractive index (2.412-1.976) and increased optical absorption-band gap (direct: 3.648-5.662 eV; indirect: 2.994-5.163 eV) with SnO₂ concentrations of 0-9 mol.%). The effectiveness of the radiation shielding was assessed over the 0.059-1.408 MeV gamma-ray energy interval. The analysis demonstrates that when the concentration of SnO₂ increases, the synthesized glasses' linear attenuation coefficient improves. As the SnO₂ content was raised between 0 and 9 mol%, the linear attenuation coefficient rose between 0.489 and 2.892 cm^-1 (at energy of 0.059 MeV) and between 0.126 and 0.128 cm^-1 (at energy of 1.408 MeV), respectively. As the SnO₂ content was raised between 0 and 9 mol%.

• 항공우주기술
• /
• 제13권2호
• /
• pp.80-86
• /
• 2014

본 연구에서는 다목적실용위성 3호 영상을 이용하여 지표면 상의 정규식생지수 비교 분석 하고자 한다. 산출된 다목적실용위성 3호의 정규식생지수 비교 분석을 위해 동일 지점 최소 관측 시간 오차를 가지는 고해상도 GeoEye 영상이 사용되었다. 먼저, 각 밴드별 분광 정도 산출을 위해 대기 보정이 수행되었다. 대기 보정 수행을 위한 기하 정보는 다목적실용위성 3호 보조자료에 포함된 태양천정각, 태양방위각, 위성천정각, 위성방위각, 날짜 정보이다. 그리고 대기 요소에 의한 감쇄, 산란, 흡수 정보를 물리적으로 계산하기 위해 수증기량, 오존량, 에어러솔 정보가 적용되었다. 일반적으로 정확한 대기정보를 얻기 위해서는 현장관측자료가 중요하지만, 본 연구에서는 MODIS atmospheric products를 사용하였고, 대기보정 모델에서 산출된 지면 반사도는 식생지수 산출에 사용되었다.