• Title/Summary/Keyword: Attention Point

Search Result 990, Processing Time 0.029 seconds

A Fundamental Study on Vibrated Crushed-stone Pile for the Improvement of Liquefaction Resistance (액상화 방지를 위한 진동쇄석말뚝에 관한 기초적 연구)

  • 천병식
    • Proceedings of the Earthquake Engineering Society of Korea Conference
    • /
    • 2000.04a
    • /
    • pp.105-111
    • /
    • 2000
  • If a saturate sand is subjected to ground vibrations it tends to compact and decrease in volume. if drainage is unable to occur the tendency to decrease in volume results in an increase in pore water pressure and if the pore water pressure build up to the point at which it is equal to the overburden pressure the effective stress becomes zero the sand loses its strength completely. This phenomenon is called "Liquefaction" It is associated primarily but not exclusively with saturated cohesion soils. The attention and study on liquefaction have been growing since the earthquake in Niigita Japan in 1964. Many researchers on liquefaction effect have been carried out in many countries under the potential influence of earthquake including Japan. However little research on liquefaction has been reported in Korea because Korea has been considered to be safe from earthquake. The term "liquefaction" is only known among geotechnical engineers,. In this paper overview of liquefaction and the evaluation on the applicability of vibrated crushed-stone pile as a liquefaction prevention method are presented.ethod are presented.

  • PDF

LOW COST DEBRIS ANALYSIS FOR INDUSTRIAL MACHINERY CONDITION EVALUATION

  • Raadnui, S.
    • Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
    • /
    • 2002.10b
    • /
    • pp.465-466
    • /
    • 2002
  • In any mechanical system consisting of gears, shafts and/or bearings, the majority of metallic particles deposited into and carried by the lubrication system originate from the deterioration of oil-wetted working surfaces, even in proper lubrication system, due to failure mechanism (s) such as wear, fatigue and fretting corrosion. Determination of the point at which transition from normal to abnormal or to actual damage occurs has become a focus of attention in research activities for years, because it has been recognized that reliable, economic operation can be achieved through appropriate preventative measures. Known collectively from 'all size wear debris analysis' as early failure detection, the methods of testing for damage differ considerably, range from a micron or a submicron size debris analysis to Magnetic Chip Detector (MCD) ferrous debris analysis. This paper will be focused on the utilization of the low-cost analysis techniques for evaluation of industrial machinery condition.

  • PDF

A Study on the Preceding Researches for the Safety Behavior in Construction (건설업 안전관리를 위한 행동적 연구 동향 분석)

  • Rhee, Simon Hang-Bok;Oh, Chi-Don;Choi, Jin-Woo
    • Journal of the Korea Safety Management & Science
    • /
    • v.15 no.3
    • /
    • pp.19-28
    • /
    • 2013
  • While the reduction of industrial accidents has been stagnant, many researchers have been studying and focusing on safety behaviors including safety perception, attitude and safety culture as a new solution as well as a turning-point of this issue. However, we do not pay attention to those studies and researches in Korean construction. Therefore, this study is to introduce preceding researches and case studies in other countries and suggest a new direction to Korean construction. This study found out the current situation and problems in Korean construction studies after tracing the safety perception, attitude and safety culture in Korea and reviewing the background and trend of overseas studies and researches with regard to safety behaviors. Fundamental researches and systematic studies must be conducted in Korean construction with the reference and research data of this study.

A Study on the Design of Barriers for the Active Noise Barrier Development (능동형 방음벽 개발을 위한 방음벽 디자인 연구)

  • Cha, Sang-Gon;Kim, Dong-Hwan
    • The Transactions of The Korean Institute of Electrical Engineers
    • /
    • v.60 no.12
    • /
    • pp.2361-2367
    • /
    • 2011
  • In this paper survey and analysis of recent trends in noise barriers and noise measurements and assessments were conducted for providing design basis of ANC barriers. Looking at the results, transparent barrier(glass) has received the most attention in domestic and foreign countries, because it has a harmony with the surrounding environment and easy installation in a small space. For optimal barrier design using computer simulation, reliability of simulation has been verified and classified into 5 groups, according to barrier's upper cross section. Evaluation results of barrier's performance and design using computer simulation are as follows : In the case of the "B-type" barrier, it has improved maximum 2.5dB(A) at each point(R1~R6) and have a good workability. Therefore, "B-type" Barriers applied to the next active noise barrier system will be possible.

Internet-Based Control and Monitoring System Using LonWorks Fieldbus for HVAC Application

  • Hong, Won-Pyo
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 2004.08a
    • /
    • pp.1205-1210
    • /
    • 2004
  • The 4-20mA analog signal used in the various industrial fields to interface sensor in distributed process control has been replaced with relatively simple digital networks, called "fieldbus, and recently by Ethernet. Significant advances in Internet and computer technology have made it possible to develop an Internet based control, monitoring, and operation scheduling system for heating, ventilation and air-conditioning (HVAC) systems. The seamless integration of data networks with control networks allows access to any control point from anywhere. Field compatible field devices become so-called "smart" devices, capable of executing simple control, diagnostic and maintenance functions and providing bidirectional serial communication to higher level controller. The most important HVAC of BAS has received nationwide attention because of higher portion of more than 40% in building sector energy use and limited resources. This paper presents the Internet-based monitoring and control architecture and development of LonWorks control modules for AHU (air handling units) of HVAC in viewpoint of configuring BAS network. This article addresses issues in architecture section, electronics, embedded processors and software, and internet technologies.

  • PDF

The Experiences of Perioperative Patients with Cancer (암환자의 수술경험)

  • Kim Young-Hae;Park Kyung-Yeon;Kim Mi-Young;Kim Mi-Ok
    • Journal of Korean Academy of Nursing
    • /
    • v.34 no.6
    • /
    • pp.945-953
    • /
    • 2004
  • Purpose: This study was to explore the experiences of perioperative patients with cancer. The purpose of this inquiry was to describe the essence of such experiences, and to understand them from the patients' point of view. Method: Participants in this study were 9 cancer patients with ages ranging from 31 to 70 years old, living in B city, who experienced cancer operations. Data collection consisted of in-depth interviews and an observation method done from October to December in 2003. In analysing data, Colaizzi's(1978) phenomenological research method was adopted. Results: Five categories emerged from ten theme clusters. The five categories were: 'shock', 'expectations & wishes', 'despair', 'feelings of burden', 'continual pain'. Conclusion: The results of this study showthat oncology nurses need to pay more attention to the psychosocial aspect of nursing to empathize and support the cancer patients who suffer and its treatment, and operations.

A Dynamical N-Queen Problem Solver using Hysteresis Neural Networks

  • Yamamoto, Takao;Jin′no, Kenya;Hirose, Haruo
    • Proceedings of the IEEK Conference
    • /
    • 2002.07a
    • /
    • pp.254-257
    • /
    • 2002
  • In previous study about combinatorial optimization problem solver by using neural network, since Hopfield method, to converge into the optimum solution sooner and certainer is regarded as important. Namely, only static states are considered as the information. However, from a biological point of view, the dynamical system has lately attracted attention. Then we propose the "dynamical" combinatorial optimization problem solver using hysteresis neural network. In this article, the proposal system is evaluated by the N-Queen problem.

  • PDF

Trends in the Telepresence Technologies and Services Beyond 5G (5G를 향한 영상회의 기술 및 서비스 동향)

  • Lee, H.K.;Han, M.K.;Jang, J.H.
    • Electronics and Telecommunications Trends
    • /
    • v.32 no.5
    • /
    • pp.20-29
    • /
    • 2017
  • In this paper, a video conferencing system, which has been attracting significant attention as an immersive telepresence service owing to the recent emergence of 5G networks, is described. We propose a service platform for Giga Media based video conferencing for 5G convergence services. The video conferencing service consists of a traditional structure that provides information exchange through the transmission of video and voice of remote participants using a Multipoint Control Unit (MCU), a browser-based video conferencing based on WebRTC, a multi-view point video conferencing, and holographic telepresence centered on mixed reality. The paper introduces the trends and detailed structures of various technologies used in the video conferencing system, and compares the video conferencing system technologies and video conferencing service characteristics for the integrated Giga Media platform.

Photovoltaic Micro Converter Operated in Boundary Conduction Mode Interfaced with DC Distribution System

  • Seo, Gab-Su;Shin, Jong-Won;Cho, Bo-Hyung;Lee, Kyu-Chan
    • Proceedings of the KIPE Conference
    • /
    • 2011.11a
    • /
    • pp.44-45
    • /
    • 2011
  • Research on photovoltaic (PV) generation is taking a lot of attention due to its infinity and environment-friendliness with decrease of price per PV cell. While central inverters connect group of PV modules to utility grid in which maximum power point tracking (MPPT) for each module is difficult, micro inverter is attached on each module so that MPPT for individual modules can be easily achieved. Moreover, energy generation and consumption efficiency can be much improved by employing direct current (DC) distribution system. In this paper, a digitally controlled PV micro converter interfacing PV to DC distribution system is proposed. Boundary conduction mode (BCM) is utilized to achieve zero voltage switching (ZVS) of active switch and eliminate reverse recovery problem of passive switch. A 120W prototype boost PV micro converter is implemented to verify the feasibility and experimental results show higher than 98% efficiency at peak power and 97.29% of European efficiency.

  • PDF

Problems and Solutions of the Korean Bug Bounty Program (한국 버그 바운티 프로그램의 제도적인 문제점과 해결방안)

  • Park, Hye Sung;Kwon, Hun Yeong
    • Journal of Information Technology Services
    • /
    • v.18 no.5
    • /
    • pp.53-70
    • /
    • 2019
  • As information security becomes more important as the fourth industrial revolution gradually emerges, an efficient and effective way to find vulnerabilities in information systems is becoming an essential requirement of information security. As the point of the protection of current information and the protection of the future industry, the Korean government has paid attention to the bug bounty, which has been recognized for its efficiency and effectiveness and has implemented through the Korea Internet Security Agency's S/W vulnerability bug bounty program. However, there are growing problems about the S/W vulnerability bug bounty program of the Korea Internet Security Agency, which has been operating for about 7 years. The purpose of this study is to identify the problems in Korean bug bounty policies through the characteristics of the bug bounty program, and to suggest the direction of the government's policy to activate the bug bounty like changes in the government's approach utilizing the market.